Large loads moved with vacuum loaded conveyors.The DPV-T Series conveyor is a vacuum loaded, top discharge dense phase conveyor that is said to fit where restricted headroom or multiple sources make other types of pneumatic conveyors impractical. DPVT conveyors are used for bulk unloading, in-plant transfer, weighing and batching, or can be customized for almost any dense-phase conveying applications. Standard units Standard units may refer to:
1. Readily crumbled; brittle.
2. Relating to a dry, brittle growth of bacteria. .
DPV DPV Delivery Point Validation (USPS system)
DPV Diver Propulsion Vehicle
DPV Desert Patrol Vehicle
DPV Delivery Point Verification
DPV Direct Payment Voucher
DPV Dry Pipe Valve (fire sprinkler systems) Series conveyors use only positive air pressure for both loading and conveying, eliminating the need for a vacuum pump, according to the manufacturer.
A proprietary venturi venturi
a tube with a decrease in the inside diameter that is used to increase the flow velocity of the fluid and thereby cause a pressure drop; used to measure the flow velocity (a venturimeter) or to draw another fluid into the stream. assembly creates the vacuum needed for loading. In vacuum mode, the conveyor fills its transfer vessel by drawing material from one or multiple supply sources, such as storage silos, bins, hopper-bottom railcars, or trailers. A high-level switch senses when the transfer vessel is full and the programmable logic controller See PLC.
(hardware) Programmable Logic Controller - (PLC) A device used to automate monitoring and control of industrial plant. Can be used stand-alone or in conjunction with a SCADA or other system. (PLC) automatically switches the valves to discharge mode and pressurizes the vessel for conveyed material to its destination. Integral dust separation minimizes venturi wear, according to the manufacturer. The PLC control is said to permit reduced supervision and can be easily adapted for highly automated facilities. Unit construction choices include carbon steel, stainless steel, stainless,
n a steel that contains a minimum of 12% chromium and approximately 0.5% carbon to resist corrosion. steel and epoxy coating. Multiple inlets and load cells are optional.
This company is a manufacturer of bulk material handling systems and controls, specializing in pneumatic conveying.