KANOTECH INFORMATION SYSTEMS DESIGNS COMNET FIBER SOFTWARE.Communication Networks Fiber Engineering and Drafting (CommNets Fiber) software, designed by Kanotech Information Systems, Edmonton, AB, enables companies to simultaneously complete engineering of fiber outside plant, drafting of fiber outside plant, and capture of fiber outside plant source data for mass distribution of fiber infrastructure. An integral part of a suite of products for firms that have RF and/or Fiber Optic networks, CommNets Fiber is one of many applications in the CommNets Suite that facilitates end-to-end connectivity End-to-end connectivity is a property of the Internet that allows all nodes of the network to send packets to all other nodes of the network, without requiring intermediate network elements to further interpret them. It was for the first time implemented in the CYCLADES-network. of the entire infrastructure network for both inside and outside plant, upholds the premise of a single point of entry for each type of data, and enables enterprise wide distribution of data. While a user is engineering fiber outside plant, CommNets Fiber is populating a database that holds ALL the information about the fiber infrastructure. In addition to storing the data attributes of each fiber infrastructure asset, CommNets Fiber also maintains detailed information on connectivity between objects. Drafters are able to do all of this using the set of Fiber tools included with the application that simplify the fiber outside plant design process and provide standards to drafters/contractors performing design. CommNets Fiber is a "shrink-wrapped" solution, thus, broadband broadband Term describing the radiation from a source that produces a broad, continuous spectrum of frequencies (contrasted with a laser, which produces a single frequency or very narrow range of frequencies). companies are able to quickly implement and begin to realize a return on their investment in a short period of time. Although the application is ready to go out of the box, the robust set of CAD standards CAD Standards have been created to improve productivity and interchange of Computer-aided design documents between different offices and CAD programs, especially in architecture and engineering. that are included with CommNets Fiber can be easily replaced or modified to meet those used by your organization through the configurable control database. No programming is required to make changes to the CAD standards. Thus, drawings that are produced using CommNets Fiber are of a much higher quality because of their compliance to your CAD standards. Visit http://www.kanotech.com/fibereng to learn more or download To receive a file transmitted over a network. In any communications session, "download" means receive, and "upload" means send. The download/upload often implies a big/little scenario, in which data is being downloaded from the "big" server into the "little" user's computer. a demo demo - /de'moh/ 1. A demonstration of a product, often of an early version or prototype. A demo is a far more effective way of inducing bugs to manifest themselves than any number of test runs, especially when important people are watching. 2. demo version. 3. of CommNets Fiber. About CommNets The Communication Networks (CommNets) Suite, a set of applications developed by Kanotech Information Systems, provides all the tools necessary for broadband companies to: engineer, draft, document for construction, as-built, maintain, distribute, and analyze infrastructure and client point of service mapping. Thus, those who achieve benefits from the infrastructure and client point of service mapping (and data related to each type of mapping) have access to it in a way that befits their responsibilities to the corporation in a user-friendly interface designed for their technical ability and data access needs. About Kanotech Kanotech Information Systems is a developer and provider of customizable geographic information system geographic information system (GIS) Computerized system that relates and displays data collected from a geographic entity in the form of a map. The ability of GIS to overlay existing data with new information and display it in colour on a computer screen is used primarily to , automated au·to·mate v. au·to·mat·ed, au·to·mat·ing, au·to·mates v.tr. 1. To convert to automatic operation: automate a factory. 2. mapping, and facilities management The management of a user's computer installation by an outside organization. All operations including systems, programming and the datacenter can be performed by the facilities management organization on the user's premises. solutions for both government (municipal, county, state) and industry (power, utilities, telecom). Kanotech utilizes its technical expertise to supply cost-effective cost-effective, n the minimal expenditure of dollars, time, and other elements necessary to achieve the health care result deemed necessary and appropriate. , productivity-enhancing solutions. For information, visit http://www.kanotech.com/demo or call 780/455-9197. |
|
||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion