Printer Friendly
The Free Library
23,403,340 articles and books


Articles from International Journal of Applied Engineering Research (November 1, 2008)

1-24 out of 24 article(s)
Title Author Type Words
A hybrid method of optimal capacitor placement for the reconfigured network. Reddy, M. Damodar; Reddy, V.C. Veera Report 4174
A novel technique of controlling DC power using microcontroller based PWM controlled rectifier. Prasad, S.A. Hari; Kariyappa, B.S.; Nagaraj, R.; Thakur, S.K. 1498
A study on retrofit of R.C.C beams. Asokkumar, M.; Krishnan, P.A. 2113
Admissible set of robust PID controller values using Hurwitz Criterion for a Pure Integrating Process with dead time. Thirunavukkarasu, I.; George, V.I.; Iyer, S. Narayana; Kumar, G. Saravana; Abrii, Yousuf Al- 3880
Advanced land use/ land cover classification using high resolution IRS imagery for the analysis of urban structure. Mohammed, Afroz Shaik; Rusthum, Shaik 2817
Assessment of FRP confined RC columns using regression analysis. Rajasekaran, A.; Raghunath, P.N.; Suguna, K. 2685
Comparative analysis of hydraulic drop ball and secondary blasting technique for secondary breaking in aggregate quarries. A case study of associated granite industry, Igboora, Oyo State, Nigeria. Saliu, M.A. 1650
Design and realization of soft IP core for pulse oximetery applications. Gaikwad, P.K.; Shinde, S.A.; Kamat, R.K. 1229
Design of an adjustable roller chain coupling for shafts of different diameters. Singh, Sandeep; Singh, Balraj; Singh, Harpreet Report 2686
Determination of GPS receiver position using Multivariate Newton-Raphson Technique for over specified cases. Kumar, B. Hari; Reddy, K. Chennakesava; Namassivaya, N. Report 1421
Distinction between transient and permanent faults using wavelet transform. Sushama, M.; Das, G. Tulasi Ram; Laxmi, A. Jaya Report 1939
Eco-friendly vapor compression refrigeration system simulation analysis with double pipe evaporator and condenser. Peethambaran, K.M.; Kumar, N. Asok Report 4391
Evaluation of inelastic response of reinforced concrete frames using pushover analysis. Sundar, N.; Elangovan, G. 5708
Experimental investigation on a centrifugal compressor by means of squealer tips. Senthil, S.; Mohan, N. Krishna Report 2885
Hierarchical perceptual segmentation using arbitrary n-phase level sets. Sandeep, V.M.; Kulkarni, Subhash Report 3510
Influence of machining parameters in WEDM for different workpiece thickness. Prakash, C.P.S.; Ranganath, B.J. Report 904
Machining studies of normal cryogenic treated P-40 tungsten carbide cutting tool inserts. SreeramaReddy, T.V.; Sornakumar, T.; VenkataramaReddy, M.; Venkatram, R. Report 1875
Performance evaluation model and decision support system for coal handling system of a typical thermal plant. Gupta, Sorabh; Tewari, P.C.; Sharma, Avadhesh Kumar Report 4351
Performance of high-strength concrete beams with hybrid fibre reinforcements. Ravichandran, A.; Suguna, K.; Ragunath, P.N.; Govindarajulu, D. 2645
Rainfall analysis in Palleru (K-11) sub-basin using GIS. Giridhar, M.V.S.S.; Viswanadh, G.K. 1104
Security challenges for routing protocol in AD-HOC networks. Srinivas, P.V.S.; Prasad, V. Kamakshi; Rao, C. Raghavendra 3617
Studies on the chloride permeability of fly ash and silica fume based ternary blended concrete. Murthi, P.; Sivakumar, V. Report 4101
Study of infrared focal plane array seekers against IR-laser striking counter measure. Chandrashekar, M.; Raju, N. Nagabhushan 1310
Use of hot EGR in a DI diesel engine with emulsified biodiesel as alternate fuel to study the performance and emission characteristics. Sachuthananthan, B.; Jeyachandran, K. 2453

Terms of use | Copyright © 2014 Farlex, Inc. | Feedback | For webmasters