Instrumentation, test equipment suppliers.The following directory lists suppliers of instrumentation instrumentation, in music: see orchestra and orchestration. instrumentation In technology, the development and use of precise measuring, analysis, and control equipment. and test equipment to the rubber industry, with address, contact person, types of instrumentation and test equipment and services offered.
Acrolab Ltd.
Paul Delaney and Peter Angermann
1423 Franklin St., Unit F143
Detroit, MI 48207
Phone: (800) 265-9542
Fax: (800) 465-9674
Instrumentation: Heat transfer technology
Adamel Lhomargy SAS
Pierre Bobin, sales office manager
Z.A. de l'Habitat, Batiment 6
Route d'Ozoir
77680 Roissy en Brie
France
Phone: (33) 1-64409210
Fax: (33) 1-64409211
Website: www.testingmachines.com
Email: adamellhomargy@testingmachines.com
Instrumentation: Physical testers
Services offered: Technical service,
training
Aeroglide Corp.
Andy Britt
Box 29505
Raleigh, NC 27626-0505
Phone: (919) 851-2000
Fax: (919) 851-6029
Website: www.aeroglide.com
Email: sales@aeroglide.com
Instrumentation: Processability testing
Akron Special Machinery, Inc.
Rick Delmoro
2740 Cory Ave.
Akron, OH 44314
Phone: (330) 753-1077
Fax: (330) 753-7308
Akron Standard, an ITW
Company
L.A. Stang, GM, spec. machinery
1624 Englewood Ave.
Akron, OH 44305
Phone: (330) 784-1251
Instrumentation: Tire uniformity equipment,
non-contact runout and bulge/
depression measuring devices, tire
endurance testing, wheel uniformity
machines
Services offered: Technical service,
training
Alpha Technologies
Ivanez Taylor
2689 Wingate Ave.
Akron, OH 44314
Phone: (330) 848-7073
Phone: (800) 356-9886
Fax: (330) 848-7326
Instrumentation: Instrumentation for
fatigue, tensile and processability testing
Altman Manufacturing Co.
Paul Altman
1990 Ohio St.
Lisle, IL 60532
Phone: (630) 963-0031
Fax: (630) 963-0089
Website: www.altmanmfg.com/altman
Email: altman@xnet.com
B.C. Ames Inc.
78 Stone Place
Melrose, MA 02176
Phone: 1 (800) 438-4249
Phone: (781) 893-0095
Fax: (781) 647-3356
Website: www.bcames.com
Email: info@bcames.com
Instrumentation: For thickness measurement
--dial and digital bench comparators,
hand held micrometers, non-contact
AccuFlow air gaging for in-process
and bench; electronic read-out
available
Services offered: Application engineering
Ametek PMT, U.S. Gauge Div.
Jim Snyder, sales manager
820 Penna Blvd.
Feasterville, PA 19053
Phone: (215) 355-6900
Fax: (215) 355-2937
Instrumentation: Process measurement
technology, pneumatic controllers,
electronic process transmitters, calibration
equipment
Services offered: Technical service,
training
Ametek Chatillon
8600 Somerset Dr.
Largo, FL 33773
Phone: (800) 527-9999
Fax: (813) 539-6882
Instrumentation: Tensile testers
Services offered: Technical service,
training, software programs
Leverett A. Anderson Co.
William S. Cole, president
1245 S. Cleveland-Massillon Rd.
Suite #2
P.O. Box 4400
Copley, OH 44321
Phone: (330) 670-1363
Fax: (330) 670-9450
Instrumentation: Materials testing
equipment for rubber and plastics
Services offered: Sales, service including
calibration design and fabrication
of special testing equipment
Anter Corporation
Bob Purvis
1700 Universal Rd.
Pittsburgh, PA 15235
Phone: (412) 795-6410
Fax: (412) 795-8225
Website: www.anter.com
Email: sales@anter.com
Instrumentation: Dilatometers for thermal
expansion (CTE) measurement,
thermal conductivity meters, thermal diffusivity/specific
heat capacity systems
Services offered: Testing services for
thermal expansion, thermal conductivity,
thermal diffusivity and specific heat
capacity
Applied Test Systems, Inc.
P.O. Box 1529
Butler, PA 16003
Phone: (724) 283-1212
Phone: (800) 299-6408 (U.S. only)
Fax: (724) 283-6570
Website: www.atspa.com
Email: ats@atspa.com;
dking@atspa.com
Instrumentation: Creep/stress rupture
testing machines, universal tension
testing machines, pressure test systems,
fatigue testers, furnaces and
ovens for testing and processing, elastomeric
extensometers and special test
equipment
Services offered: Technical service
Asylum Research
Terry Mehr, dir. of mktg.
341 Bollay Dr.
Santa Barbara, CA 93117
Phone: (805) 685-7077
Fax: (805) 685-5007
Instrumentation: Atomic force microscope,
molecular force probe, scanning
probe microscope, gold slides
Atlas Material Testing Technology
Jamie Chesler, mktg. services
4114 N. Ravenswood
Chicago, IL 60613
Phone: (773) 327-4520
Fax: (773) 327-5787
Instrumentation: Complete line of
environmental and materials testing
instrumentation that can simulate radiant
energy, temperature, salt fog, moisture
and other components of a natural
environment, full line of physical test
instruments
Services offered: Technical service,
training
Automated Control Systems, Inc.
Sean Tucker, president
627 Hartzell Rd.
New Haven, IN 46774
Phone: (260) 493-6606
Fax: (260) 749-4782
Website: www.acsmfg.com
Email: sales@acsmfg.com
Instrumentation: PVT (pressure-vibration-thermal)
coolant hose durability
stand
Services offered: Design and build test
equipment for component durability,
audit and functional tests; leak and
burst testing equipment with data acquisition
capability
Automation Products, Inc.
Applications Department
303 Max Roy St.
Houston, TX 77008-6294
Phone: (713) 869-0361
Fax: (713) 869-7332
Instrumentation: Equipment which
measures and/or controls density, specific
gravity, % solids, % concentration,
viscosity and level
Basler Vision Technologies
Headquarters Division Sealing
Inspection
Kerstin Wehrend
Ander Strusbek, 60-62
D-22926 Ahrensburg, Germany
Phone: 49(0) 4102-463-0
Fax: 49(0) 4102-463-109
Email: info@baslerweb.com
Instrumentation: Automatic seals and
o-ring inspection systems for surface
imperfections and dimensions
Basler Vision Technologies
USA Office Sealing Inspection
Katie Martin
740 Springdale Dr.
Exton, PA 19341
Phone: (610) 280 0171
Fax: (610) 280-7608
Instrumentation: Automatic seals and
o-ring inspection systems for surface
imperfections and dimensions
Bayco Ovens
Rohn Grant, vice president
4350 Poll Dr.
Sacramento, CA 95838
Phone: (916) 565-7810
Fax: (916) 929-5041
Instrumentation: Heat processing
equipment, industrial ovens
Services offered: Technical service,
training
E.H. Benz Co., Inc.
Material Testing Instruments
Ted Benz, president
73 Maplehurst Ave.
Providence, RI 02908
Phone: (401) 331-5650
Instrumentation: Rheometers, durometers,
viscometers, tensile testers, test
dies, test molds, laboratory ovens,
hardness, flexing, fatigue, aging, abrasion,
impact, lab presses, cutting presses,
brittleness testers and plastometers,
TR testers, specific gravity testers, test
tubes and glassware, test fixtures and
grips
Services offered: Technical service,
training, software programs, repair and
rebuilding testing instruments, and lab
information management systems
Beta LaserMike
Rick Kristensen
8001 Technology Blvd.
Dayton, OH 45424
Phone: (937) 233-9935
Fax: (937) 233-7284
Website: www.betalasermike.com
Instrumentation: Non contact, laser-based
dimensional gauging, ultrasonic
wall-thickness and concentricity measurement
systems
Bohlin Instruments, Inc.
Suite 1, 11 Harts Lane
E. Brunswick, NJ 08816
Phone: (732) 254-7742
Fax: (732) 354-1577
Website: www.bohlininstruments.com
Instrumentation: Instrumentation for
dynamic/thermomechanical and processability
testing
C.W. Brabender Instruments
Kevin R. Van Allen
50 E. Wesley St.
South Hackensack, NJ 07606
Phone: (201) 343-8425
Website: www.cwbrabender.com
Email: cwbi@cwbrabender.com
Instrumentation: Laboratory testing
equipment for rubber testing, including
processability studies, dispersion, mixing,
cure and density for R&D and QC
Services offered: Testing laboratory
(see ad on page 48)
Brookhaven Instruments Corp.
Bruce Weiner, sales and marketing
750 Blue Point Rd.
Holtsville, NY 11742
Phone: (631) 758-3200
Fax: (631) 758-3255
Email: sales@bic.com
Website: www.bic.com
Instrumentation: Particle size measurement
utilizing laser light scattering,
disc centrifugation, laser scanner and
dynamic image analysis; for zeta potential
analysis by particle electrophoresis
and streaming potential; applications
include pigments and carbon blacks
Services offered: Technical support
Buchel BV
Andre Jansen, director
Fokkerstraat 24, 3905 KV
Veenedaal, Netherlands
Phone: (31) 318-521-500
Fax: (31) 318-540-358
Website: www.testingmachines.com
Email: buchel@testingmachines.com
Instrumentation: Physical testers
Services offered; Technical service,
training
Bytewise Measurement Systems
Michael Harris, CEO
Russ Carreker, president
1150 Brookstone Centre Pkwy.
Columbus, GA 31904
Phone: (706) 323-5142
Fax: (706) 323-0178
Website: www.bytewise.com
Email: sales@bytewise.com
Instrumentation: Offer both in-line and
off-line, non-contact measurement solutions
for the tire and rubber seals and
gasket industries. Some examples are
Profile 360, sidewall bulge and dent
measurement systems and several
applications for tire building machine
measurements
Services offered: Installation and training
(see ad on page 56)
Canrad Hanovia, Inc,
Rick Macintyre, photochemical division
100 Chestnut St.
Newark, NJ 07105
Phone: (201) 589-4300
Fax: (201) 589-4430
Instrumentation: Ultraviolet photochemical
systems used in processing
Services offered: Technical service,
training
Carver, Inc.
Jeff Kramer
1569 Morris St.
P.O. Box 544
Wabash, IN 46992-0544
Phone: (219)563-7577, ext. 249
Fax: (219) 563-7625
Email: carverpress@ctlnet.com
Website: www.carverpress.com
Instrumentation: Laboratory equipment
(see ad on page 50)
CCS--Corporate Consulting
Services, Instruments, Inc.
Jack C. Warner, president
1145 Highbrook Ave.
Suite 500
Akron, OH 44301
Phone: (330) 376-3600
Phone: (800) 742-8535
Fax: (330) 376-8500
Fax: (800) 227-9329
Website: www.ccsi-inc.com
Website: www.orecozone.net
Email: jack@ccsi-inc.com
Instrumentation: Durometer hardness
testers, curemeter (ODR), Mooney viscometer,
Rheomaster data systems for
Mooney and rheometers, new recorders
for ODRs, ASTM dies, molds,
cutters, the XDR Mooney viscometer,
XDR-MDR-moving die rheometer, XDR
OSC disk rheometer, Orec ozone
chambers and monitor calibration
Services offered: Certified calibration,
service and repair of durometer hardness
testers, Mooney viscometers, all
rheometers and recorders, tensile
testers, thickness gauges, A2LA certified
calibration lab and ISO 9002 registered
CDS Analytical, Inc.
Neil Cornelssen, Dir. of Sales & Mktg.
465 Limestone Rd.
P.O. Box 277
Oxford, PA 19363-0277
Phone: (610) 932-3636
Phone: (800) 541-6593
Fax: (610) 932-4158
Email: cdsanalytical.com
Website: www.cdsanalytical.com
Instrumentation: Pyrolysis equipment
Services offered: Manufacturing
Cober Electronics, Inc.
Chris Varga
151 Woodward Ave.
Norwalk, CT 06854
Phone: (203) 855-8755
Fax: (203) 855-7511
Instrumentation; Microwave receptivity
testing, microwave curing ovens
Services offered: Technical service for
microwave technology
Coram Instruments Inc.
Loretta J. Miller, president
37 Whinstone St.
Coram, NY 11727
Phone: (516) 331-5321
Instrumentation: Testing instruments
for rubber, plastics and polyurethane
foam
Dauh Chau Enterprises
Christine Chang
15 Fu Shing Rd.
Sec. 3
Taichung, Taiwan
Phone: 04-2629602
Fax: 04-2630138
Instrumentation: Instrumentation for
fluid resistance, fatigue, abrasion, tear,
tensile, processability and ozone resistance
testing
Dek-Tron Scientific Instruments
Segundo Vargas, sales mgr.
244 East Third St.
Plainfield, NJ 07060
Phone: (908) 668-1777
Fax: (908) 668-4794
Instrumentation: Test equipment for
materials
Services offered: Applications assistance
for testing of materials; service
and repair of test equipment
Despatch Industries
P.O. Box 1320
Minneapolis, MN 55440
Phone: (612) 469-5424
Instrumentation: Environmental test
chambers, curing and testing ovens
Services offered: Technical service,
training
Dewes Gumbs Die & Presses
Robert Salemi or James Long-Up
38-33 24th St.
L.I.C., NY 11101
Phone: (718) 784-9756
Fax: (718) 784-9755
Instrumentation: Specimen cutting
dies, dies for ASTM, DIN, JAP and
TAPPY and testing equipment
Services offered: Reconditioning and
recalibration of test dies and molds
Digital Instruments, Veeco Metrology
Group
M.G. Heaton, director of marketing
112 Robin Hill Rd.
Santa Barbara, CA 93117
Phone: (805) 967-1400
Phone: (800) 873-9750
Instrumentation: Scanning probe, atomic
force microscopes, stylus profilers
Dillon Quantrol
Dave Cone, Business Director
1000 Armstrong Dr.
Fairmont, MN 56031
Phone: (507) 238-4461
Instrumentation: Testing system, computer
controlled to manual systems,
force gauges, load cells, software
Services offered: Sales, service and
technical assistance
Electronic Development Labs
Jean Moore, sales mgr.
244 Oakland Dr.
Danville, VA 24540
Phone: (800) 342-5335
Phone: (804) 799-0807
Fax: (604) 799-0847
Instrumentation: Temperature measuring
devices and thermocouple sensors
Services offered: Technical service,
standard and custom designs, tool and
die and mold repair
Emerson Apparatus, Inc.
William C. Holmes, Sr., president
170 Anderson St.
Portland, ME 04112
Phone: (207) 774-5254
Fax: (207) 774-5302
Instrumentation: Rubber buffing machines,
foam endurance tester, ASTM
1055 load deflection tester
Services offered: Technical service,
training
Federal Products Co.
Alex Tabenkin, marketing mgr.
1144 Eddy St.
Providence, RI 02940
Phone: (401) 784-3100
Fax: (401) 941-5280
Instrumentation: Dispersion analyzer
for determining carbon particle dispersion
in rubber products and tires, dimensional
gauging equipment, roundness
gauging equipment, surface finish
gauging equipment per ASTM D-2663
method C
Services offered: Technical service,
training, computer software programs
Ferry Industries, Inc.
Douglas Sublett
4445 Allen Rd.
Stow, OH 44224-1752
Phone: (330) 920-9200
Fax: (330) 920-4200
Instrumentation: Rubber testing
machines, abrasion/adhesion tester,
cord tester, hysteresis
Services offered: Technical service
FMC Corporate Technology Center
Herb Jones
1205 Coleman Ave.
Santa Clara, CA 95052
Phone: (408) 289-3877
Fax: (408) 289-4429
Instrumentation: Full chemical and
physical characterization capabilities, as
well as component testing
Services offered: Engineering consulting,
materials recommendation and selection,
testing and analysis, materials
characterization
Forte Technology, Inc.
Robert A. Mastico, VP
201 Carnegie Row
Norwood, MA 02062
Phone: (781) 769-9150
Fax: (781) 769-5308
Email: inforw@forte-tec.com
Website: forte-tec.com
Instrumentation: Electronic moisture
measurement system for an entire bale
of synthetic rubber
Services offered: Technical service,
training, software programs, synthetic
rubber testing equipment
Freeman Company
Chad Root, director of sales
911 Graham Dr.
Fremont, OH 43420
Phone: (419) 334-9709
Fax: (419) 334-3426
Website: www.freeman-die.com
Email: fremont@freeman-die.com
Instrumentation: ASTM test specimen
dies, presses, cutting surfaces, ASTM
molds
Services offered: Certified new tools
and relevel, resharpen, certify existing
tools
Gearhart Machine Company, Inc.
Gregory Gearhart, president
1145 Highbrook Ave.
Akron, OH 44301
Phone: (330) 253-1880
Fax: (330) 253-1886
Instrumentation: Lab-ASTM molds,
custom rubber molds
Services offered: Jigs and fixtures,
dies and rotors, machining consultants,
research and development, custom
machinery, built and designed cutting
dies, machining and duplicating of
obsolete gears and parts
Goettfert
Tim Haake, general mgr.
488 Lakeshore Parkway
Rock Hill, SC 29730
Phone: (803) 324-3883
Fax: (803) 324-3993
Instrumentation: Elastograph vario
curemeter, Rheovulkameter processability
tester, capillary rheometer
Rheotester 1000, Rheograph 6000
Gomaplast Machinery, Inc.
Marcelo S. Hildebrandt
500 East Henry St.
Wooster, OH 44691
Phone: (330) 263-7845
Fax: (330) 263-7846
Instrumentation: Tensile testers,
rheometers and lab ovens
Grecon, Inc.
Bob Barnum, vice pres., sales
7747 S.W. Cirrus Dr.
Beaverton, OR 97008-5968
Phone: (503) 641-7731
Fax: (503) 641-7508
Website: www.grecon-us.com
Email: sales@grecon-us.com
Instrumentation: Spark detection/
extinguishment system, thickness measurement
system, delamination detection
system, cyclone plug-up detection
system
Gruenberg Oven Co.
Arthur V. Campbell
P.O. Box 3246
2121 Reach Rd.
Williamsport, PA 17701
Phone: (717) 326-1755
Instrumentation: Industrial ovens, test
chambers, calorimeters
Services offered: Technical service,
training, engineering
Hampden Test Equipment Ltd.
Ian Richardson
Kingsthorpe Business Centre
Northampton NN2 6EB, U.K.
Phone: +44 604 718177
Fax: +44 604 717197
Website: www.hampden-test.com
Email:
info@hampden-test-preeserve.co.uk
Instrumentation: Ozone test chambers,
abrasion tester, resilience tester,
IFD and CFD foam hardness testers,
porosity and rise apparatus
Services offered: Sales and service
Harris Instrument Corp.
Gary J. Thompson, director, sales
155 Johnson Dr.
Delaware, OH 43015
Phone: (740) 369-3580
Fax: (740) 369-2653
Website: www.harris-instrument.com
Email: info@harris-instrument.com
Instrumentation: Non-contact measurement
sensors and control systems;
digital process control systems
Services offered: Monitor and control
of extruded dimension for size control
and measurement of shrinkage, inspection
for holes
Hotpack Corp.
10940 Dutton Rd.
Philadelphia, PA 19154
Phone: (215) 824-1700
Fax: (215) 637-0519
Website: www.hotpack.com
Email: hotpack@hotpack.com
Instrumentation: Ovens, environmental
test chambers, incubators
Services offered: Technical service,
training, manufacturing
Hydramotion Ltd.
Danny Morbey
1A York Rd., Business Park
York, England, YO17 6YA
Phone: (44) 1653-600294
Fax: (44) 1653-692446
Website: www.processviscometer.com
Email: rubber@hydramotion.com
Instrumentation: Process viscometers,
viscosity instrumentation
Imass, Inc.
R.A. Heinrich, president
James M. Driscoll, marketing director
P.O. Box 134
Accord, MA 02018-0134
Phone: (781) 982-8096
Fax: (781) 982-9647
Email: imass@worldnet.att.net
Website: www.imass.com
Instrumentation: Materials testing
instruments
IMC Instruments Inc.
Elizabeth Frias, marketing assistant
N60W14434 Kaul Ave.
Meno. Falls, WI 53051
Phone: (262) 252-4620
Fax: (262) 252-4623
Website: www.instruments.com
Email: IMC262@aol.com
Instrumentation: Temperature
instrumentation (alarms, monitors, controllers,
etc.)
Services offered: Repairing company
equipment
Impakt
Bruce Freeman
5721 Dragon Way
Cincinnati, OH 45227
Phone: (513) 271-9191
Fax: (513) 271-5120
Website: www.impaktusa.com
Email: impakt@worldnet.att.net
Instrumentation: Laboratory specimen
cutters, laboratory cutting presses,
sample molds
Services offered: Sharpening and certification
of laboratory specimen cutters
Indusco
Tony Hoffman, president
3611 Keystone Ave.
Nashville, TN 37211-3350
Phone: (615) 833-0666
Fax: (615) 834-8722
Website: www.induscousa.com
Email: thoffman@induscousa.com
Instrumentation: Fatigue, tear and tensile
testing; instrumentation for testing
of raw materials and vulcanized and
unvulcanized rubber testing
Instron Corporation
Jessica Carroll
100 Royall St.
Canton, MA 02021
Phone: (781) 575-5851
Email: marcom@instron.com
Instrumentation: Universal tension
and compression testing machines, servohydraulic
machines for determining
the dynamic properties of elastomers,
grips, extensometers and environmental
chambers
Services offered: Technical service,
training, software programs, load and
extensometer verification traceable to
NIST
J&L Tool & Machine, Inc.
Joe E. Landwerwerlen, president
P.O. Box 367
1441 Miller Ave.
Shelbyville, IN 46176
Phone: (317) 398-6281
Instrumentation: JL 5000 SPL flow
comparator
Karder Rubber Machinery &
Engineering
Daniel Abraham, exec. vice president
258 Kenmore Blvd.
Akron, OH 44301
Phone: (330) 253-3377
Fax: (330) 253-4733
Instrumentation: Tensile testing
Kernco Instrument Co.
John Kelly, general mgr.
420 Kenazo Ave.
El Paso, TX 79927
Phone: (915) 852-3375
Fax: (915) 852-4084
Fax: (800) 325-3875
Website: www.kemcoinstr.com
Email: brkernco@whc.net
Instrumentation: Contact angle meter,
surface tension analyzer, hardness
testers for rubber-type materials, infrared
thermometers, microwave moisture
analyzers to measure bone dry to
full saturation (0 to 100% moisture),
spectrophotometers-ultraviolet and
visible
Services offered: Technical service
LMI Technologies (USA), Inc.
Dan Howe and Mike Snow, sales mgrs.
21666 Melrose Ave.
Southfield, MI 48075
Phone: (248) 359-2409;
Phone: 46-31-336-25-13 (Sweden)
Fax: (248) 355-3283
Website: www.lmint.com
Email: sales.rubber@lmint.com
Instrumentation: Over 44 non-contact
laser-based measurement sensors
for a variety of on-and-off line
applications; these include radial
runout at full production speed; profiling
green and high silicone content
rubber; tire sidewall and inspection;
thickness control of calendered rubber;
splice width detection; treadwear
analysis; extrusion profiling and profiling
sidewall bulge and dent and many
others
Services offered: Installation, training
and support services; OEM capability
(see ad on page 51)
Lasor/Systronics, Inc.
Maureen Macken, Mktg. Mgr.
4357 Park Dr., Suite J
Norcross, GA 30093
Phone: (770) 449-7776
Fax: (770) 449-0399
Website: www.lasorsystronics.com
Instrumentation: Quality control systems;
inspection and measurement,
including tread length monitoring system,
tread profiling measurement system,
web inspection system, Fischer
cutter, sidewall inspection system
Services offered: Turnkey systems
including training, installation, maintenance
and support
Leco Corporation
3000 Lakeview Ave.
St. Joseph, MI 49085-2396
Phone: (616) 985-5496
Phone: (800) 292-6141
Fax: (616) 982-8977
Website: www.leco.com
Email: info@leco.com
Instrumentation: Instruments for the
determination of carbon, hydrogen,
nitrogen, sulfur and oxygen, complete
line of spectrometers, a thermogravimetric
analyzer, a variety of microscopes
and accessories
Leica Microsystems Inc.
111 Deer Lake Rd.
Deerfield, IL 60015
Phone: (847) 405-0123
Phone: (800) 248-0123
Fax: (847) 405-0147
Email:info@leica-microsystems.com
Website: www.leica-microsystems.com
Instrumentation: Microscopes, measuring
equipment, microphotographic
equipment, microtomes
Services offered: Technical service,
training
C.A. Litzler Co., Inc.
James H. Rogers, VP, sales
4800 W. 160th St.
Cleveland, OH 44135
Phone: (216) 267-8020
Fax: (216) 267-9856
Website: www.calitzer.com
Email: sales@calitzler.com
instrumentation: Computreater 2000
single end cord treating lab machine
Services offered: Field service
Manufacturers Supplies Co.
Robert D. Goellner
4200 Rider Trail North
Earth City, MO 63045
Phone: (314) 770-0880
Fax: (314) 770-0990
Instrumentation: Equipment for lab
testing; clickers for dumbbell cutting;
skiving equipment for ply splitting; bandknife
splitters
Services offered: Service and installation
of above
Mast/Keystone
Thomas Hall, v.p. sales
340 Western Rd.
Ste. #1
Reno, NV 89506
Phone: (702) 324-2799
Fax: (702) 324-5375
Instrumentation: Ozone test chambers
and monitors
Meeco Inc,
Thomas Mallon
250 Titus Ave.
Warrington, PA 18976
Phone: (215) 343-6600
Fax: (215) 343-4194
Website: www.meeco.com
Email: meecosales@meeco.com
instrumentation: Electrolytic moisture
analyzers, electronic measuring instruments
to detect trace moisture in gases
and solids
Services offered: Technical service
Messmer Instruments Ltd.
Michael O'Shea, general sales mgr.
Unit F1 Imperial Business Estate
West Mill, Gravesend
Kent, U.K. DA11 0DL
Phone: (44) 1474-566-488
Fax: (44) 1474-560-310
Website: www.testingmachines.com
Email: messmer@testingmachines.com
Instrumentation: Physical testers
Services offered: Technical service,
training
Micro-Vu Corp.
Marc Deutsch, marketing/sales mgr.
7909 Conde Ln.
Windsor, CA 95492
Phone: (707) 838-6272
Fax: (707) 838-3985
Website: www.microvu.com
Email: sales@microvu.com
Instrumentation: Automated video coordinate
measuring machine provides
automatic dimensional measuring of o-rings,
gaskets, etc.
MKB Industries Inc.
M.V. Blyth
63-8 North Brandford Rd.
Brandford, CT 06406
Phone: (203) 481-1900
Fax: (203) 481-1943
Instrumentation: Raw materials, vulcanized
and unvulcanized rubber testing
MTI Instruments, Inc.
Paul Slazas, product sales mgr.
325 Washington Ave. Ext.
Albany, NY 12205
Phone: (518) 218-2550
Fax: (518) 218-2506
Email: pslazas@mtiinstruments.com
Instrumentation: Quality control inspection
products, sensors and amplitiers
using fiber optic, capacitance and
laser technologies, for displacement
vibration, runout, thickness and surface
condition
MTS Systems Corp.
Pat Irwin, mgr., vehicle dynamics div.,
elastomer test systems
14000 Technology Dr.
Eden Prairie, MN 55344
Phone: (612) 937-4000
Instrumentation: Test systems to
measure the dynamic properties of
elastomeric materials and components
Services offered: Technical consulting
service, training, software programs
NDC Infrared Engineering
Lloyd W. Edelberg, Mktg. Comm. Mgr.
5314 North Irwindale Ave.
Irwindale, CA 91706
Phone: (626) 960-3300
Fax: (626) 939-3870
Website: www.ndcinfrared.com
Email: info@ndcinfrared.com
Instrumentation: On-line thickness
gauging and control systems for the
rubber and calendered products industry;
systems range from simple single-point
measurements to complete scanning
systems
NewAge Testing Instruments, Inc.
James Blair
147 James Way
Southampton, PA 18966
Phone: (215) 526-2200
Fax: (215) 526-2192
Instrumentation: Hardness testers for
IRHD and durometer scales in both regular
and micro, built in SPC, RS232 output
and fully automated for reduced
operator influence
New Era Die Co.
Steve Smeltzer, general mgr.
601 Maple St.
Red Lion, PA 17356
Phone: (717) 244-4586
Fax: (717) 244-2445
Email: nedies@earthlink.net
Instrumentation: Fatigue, tear and tensile
testing
Nikon Inc., instrument Group
Stephen Page, mgr., industrial dept.
1300 Walt Whitman Rd.
Melville, NY 11747
Phone: (516) 547-8500
Instrumentation: Profile projectors,
video measuring systems, microscopes
Services offered: Technical service,
training, software programs
Ocean Industries Inc.
Acu-Gage Systems Division
John A. Kane, president
P.O. Box 6178
Manchester, NH 03108
Phone: (603) 622-2481
Fax: (603) 626-1277
instrumentation: Acu-Gage I single
axis linear measuring machine in sizes
ranging from 12" to 120"; Acu-Gage II,
two axis coordinate measuring machine
with base sizes of 12" x 12" to 48" x 96",
Z-axis also available
OCM Test Labs
Bruce Sauer, Lab Director
3883 E. Eagle Dr.
Anaheim, CA 92807
Phone: (714) 630-3003
Fax: (714) 630-4443
Email: sauer@ocmtestlabs.com
Instrumentation: DSC, DTA, TMA,
DMA, FTIR, GCMS, GC, HPLC, GPC,
brittleness, torsional stiffness, instrumented
impact, temperature retraction
vacuum outgassing, tensile properties
at elevated and subambient temperatures,
fatigue
Services: Mechanical, physical, chemical,
thermal, environmental exposure,
qualification programs and material
identifications
Ontario Die Company
119 Roger St.
Waterloo, Ontario, Canada N2J 3Z6
Phone: (519) 576-8950
Fax: (519) 576-3670
Instrumentation: Laboratory specimen
cutters, laboratory cutting presses,
sample molds
Services offered: Sharpening and certification
of laboratory specimen cutters
Optical Associates Inc.
Charles D. Turk
1425 McCandleless Dr.
Milpitas, CA 95035
Phone: (408) 263-4944
Fax: (408) 263-6389
instrumentation: UV radiometers,
curemeters
Optigrade Inc.
Leif Nilsson, Area Manager
P.O. Box 5413
Akron, OH 44334
Phone: (330) 864-2238
Fax: (330) 864-4134
Website: www.optigrade.com
Email: leifnilsson@optigrade.com
Instrumentation: Equipment for testing
of dispersion and presence of agglomerates
Orec Ozone Chambers and Monitors
1145 Highbrook Ave., Suite 500
Akron, OH 44301
Phone: (330) 376-3600
Phone: (800) 376-8500
Fax: (330) 376-8500
Fax: (800) 227-9329
Website: www.ccsi-inc.com
Website: www.orecozone.net
Email: jack@ccsi-inc.com
Instrumentation: Ozone test chambers
providing continuous ozone measurement
control and strip chart recording
Oxford instruments, Measurement
Systems
Robert Wopperer, V.P. of product sales
945 Busse Rd.
Elk Grove Village, IL 60007
Phone: (800) 678-1117 ext. 322
Phone: (847) 439-4404
Fax: (847) 439-4425
Website: www.oxford-instruments.com
Email: rwopperer@msys.oxinst.com
Instrumentation: EDXRF, WDXRF,
MDXRF and NMR spectrometers
PLV Systems Inc.
Sam Melamed
116 Viceroy Rd., Bldg. D, Unit 6
Concord, Ontario, Canada L4K 2M4
Phone (905) 761-7234
Fax: (905) 760-1473
Website: www.plv.com
Email: sam@plv.com
Instrumentation: Power profiler--family
of profile extrusion measurement
instruments for on-line and off-line
dimensional characteristics
PTC Instruments/PTC Metrology
Linda A. Wolfe, Gen. Mgr.
2301 Federal Ave.
Los Angeles, CA 90064
Phone: (310) 478-1134
Fax: (310) 312-0826
Instrumentation: Durometers to measure
the hardness of rubber, plastic,
ASTM, A, B, C, D, DO, O, OO, OOO
and test stands
Services offered: Technical service,
durometer calibration and certification
with standards traceable to NIST design
custom durometers, A2LA accredited
laboratory for durometer calibration
Panametrics, Inc.
Meindert Anderson
221 Crescent St.
Waltham, MA 02453
Phone: (800) 225-8330
Phone: (781) 899-2719
Fax: (781) 899-1552
Email: ndt@panametrics.com
Internet: www.panametrics.com
Instrumentation: Thickness gauges,
flaw detectors, transducers, automated
systems, instrumentation
Services offered: Applications lab,
training
Perkin Elmer Instruments
761 Main Ave.
Norwalk, CT 06859
Phone: (800) 762-4000
Phone: (203) 762-4000
Fax: (203) 762-4228
Website: www.perkinelmer.com
Email: info@perkin-elmer.com
Instrumentation: Analytical instruments
used in laboratory analysis
Services offered: Technical service,
training, software programs
Piedmont Polymer Equipment
Robert Myers
1220 Olde Oaks Dr.
Grays, TN 37615
Phone: (423) 753-7811
Fax: (423) 753-7911
Instrumentation: Fatigue, tensile,
processability and ozone resistance
testing
Prince Instruments, Inc.
Francis Mashintonio
1020 Industrial Blvd.
Southhampton, PA 18966-4095
Phone: (215) 355-1500
Website: www.princoinstruments.com
Email: fran@princoinstruments.com
Instrumentation: Level controls and
level transmitters
Services offered: Technical service
Pulnix America, Inc.
1330 Orleans Dr.
Sunnyvale, CA 94089
Phone: (408) 747-0300
Website: www.pulnix.com
Email: pulnix@pulnix.com
Instrumentation: Light positioning projectors,
laser projectors, linear array
cameras, matrix array cameras end
photoelectric sensors
Services offered: Technical service
The Pyrometer Instrument Co., Inc.
209 industrial Pkwy.
Northvale, NJ 07647
Phone: (201) 768-2000
Phone: (800) 468-7976
Fax: (201) 768-2570
Website: www.pyrometer.com
Email: pyroinfo@pyrometer.com
Instrumentation: Temperature measuring
devices, thermal line scanners,
temperature controllers, recorders and
transmitters, NLW-laser pyrometer to
measure emissivity
Services offered: Technical service,
training, calibration
Quest Integrated, Inc.
7098 SE 12th Circle
Ocala, FL 34480
Phone: (352) 861-1022
Instrumentation: Lotis QC-20 hose
measurement system
Q-Panel Company
Russell Raymond, technical service
26200 First St.
Cleveland, OH 44145
Phone: (440) 835-8700
Instrumentation: QUV accelerated
weathering testers, MTG multi-test
gravelometer, cyclic salt fog chamber
Services offered: Contract testing lab
Frank E. Randall Co., Inc.
Henry Gardner, general mgr.
248 Ash St.
Waltham, MA 02453
Phone: (781) 894-2030
Fax: (781) 642-9378
Instrumentation: Dial thickness
gauges
Rex Gauge Co., Inc.
AI Blum, vice president
1250 Busch Parkway
Buffalo Grove, IL 60089
Phone: (847) 465-9009
Fax: (847) 465-9229
Website: www.rexgauge.com
Email: info@durometer.com
Instrumentation: Durometer hardness
gauges (for checking the hardness of
non-metallic surfaces) and accessories
Services offered: Repair and calibration
(durometer sales)
(see ad on page 54)
Rheometric Scientific
1 Possumtown Rd.
Piscataway, NJ 08854
Phone: (908) 560-8550
Instrumentation: Thermal analysis and
laboratory rheometers, one of which
measures flow properties of rubber
products as they are being extruded
Services offered: Technical service,
training, software programs for measuring
the dynamic mechanical rheological
properties of uncured and cured elastomers
Rubber Molding Technology Inc.
Maurizio Coscia
36036 Lakeland Blvd.
Eastlake, OH 44095
Phone: (216) 951-8625
Fax: (216) 951-6003
Instrumentation: Processability testing
Satec Systems, Inc.
Amy Sowers, mktg. services
900 Liberty St.
Grove City, PA 16127-9005
Phone: (724) 458-9610
Fax: (724) 458-9614
Instrumentation: Materials test equipment
including tensile, stress-relaxation,
tear, creep and fatigue
Services offered: Materials test equipment
verification, repair, installation, calibration
and training
Scanco USA, Inc.
Rasesh Kapadia
10 Lantern Lane
Wayne, PA 19087
Phone: (610) 296-2056
Fax: (610) 296-2056
Website: www.microCT.com
Email: rkapadia@scanco.ch
Instrumentation: X-ray micro-computed
tomagraphy systems
Services offered: Non-destructive
scanning/microscopy
ScanTech Corp.
Sam Taliferro
1136 Manitou Ave.
Manitou Springs, CO 80829
Phone: (719) 685-9432
Instrumentation: Sensor systems to
verify steel cord spacing in tires during
the assembly process
Services offered: Full system integration
and automation capabilities
Schenck Pegasus Corp.
David Sallberg, vice president, sales
2890 John R Rd.
Troy, MI 48083
Phone: (810) 689-9000
Instrumentation: Test machines for
dynamic spring rate, damping and durability
Services offered: Contract testing services
for dynamic spring rate, damping
and durability
Signature Control Systems
Luann Johnson, inside sales mgr.
10180 W. Hampden Ave.
Denver, CO 80227
Phone: (303) 783-0500
Fax: (303) 783-0800
Website: www.signaturecontrol.com
Email: info@signaturecontrol.com
Instrumentation: Intelligent process
control system featuring SmartTrac
expert system software to monitor and
control process in real-time
Spectro Products
Emily Stephens, mktg. mgr.
385 State St.
North Haven, CT 06473-3173
Phone: (203) 281-0122
Fax: (203) 248-8887
Instrumentation: Rheomate, Duromate
and Gravimate computer systems
Services offered: Software for instrument
automation and process control,
SPC and LIMS
TA Instruments, Inc.
Terry Kelly, worldwide marketing mgr.
109 Lukens Dr.
New Castle, DE 19720
Phone: (302) 427-4000
Fax: (302) 427-4001
Website: www.tainst.com
Email: info@tainst.com
Instrumentation: Thermal analysis
instruments, dynamic mechanical
analysis, dielectric analysis, rheometers
for evaluating fluids and soft
solids
Services offered: Technical service
Taber Industries
Alan Jaenecke, Product Mktg. Mgr.
455 Bryant St.
North Tonawanda, NY 14120
Phone: (716) 694-4000
Fax: (716) 694-1450
Instrumentation: Destructive tests-abrasion
Tarlin Scientific, Inc.
Harris I. Tarlin
P.O. Box 368
Worcester, MA 01602
Phone: (508) 799-0909
Fax: (508) 757-9907
Email: tarlinscientific@aol.com
Instrumentation: Brittleness testers,
compression testers, melt index apparatus,
ASTM testers for flammability,
rheometers
Tavdi Co., Inc.
Ismail Saltuk, president
P.O. Box 298, 300 County Rd.
Barrington, RI 02806
Phone: (401) 245-2932
Fax: (401) 245-0737
Email: Isaltuk@aol.com;
isaltuk@tavdi.com
Instrumentation: Computerized
Yerzley oscillograph (CYO-III) for testing
physical properties of rubber specimens
as per ASTM D 945
Services offered: Equipment sales,
maintenance and repair services, consulting
and testing
Tech Pro, Inc.
John B. Putman, president
Douglas Ruch, sales mgr.
P.O. Box 1239
121 E. Ascot Lane
Cuyahoga Falls, OH 44224
Phone: (330) 923-3546
Fax: (330) 923-6335
Website: www.techpro-usa.com
Email: techpro@techpro-usa.com
Instrumentation: Oscillating disk
rheometer, moving die rheometer,
rheometer and Mooney data acquisition
and SPC analysis system, automatic
density tester, tensile tester,
shearing disk viscometer, laboratory
data management software and dispersion
analyzer, flexometer, cut and
chip tester
Services offered: Field, shop service,
and complete rebuilding for rheometers,
viscometers and tensile testers,
calibration services
(see ad on page 51)
Tenney Environmental
Erin Hall, Mktg. Coord.
2121 Reach Rd.
Williamsport, PA 17701
Phone: (570) 326-1770
Fax: (570) 326-7304
Website: www.tenney.com
Instrumentation: Environmental test
chambers
Services offered: Replacement
parts, service of environmental test
chambers and sale or rental of reconditioned
environmental chambers
Tensitron, Inc.
Stan Saxl
1668 Valtec Lane
Boulder, CO 80301
Phone: (303) 444-5383
Fax: (303) 444-0204
Website: www.tensitron.com
Email: tensionmeters@tensitron.com
Instrumentation: Cord tension
testers, fiber testers, tape and web
tension transducers, sheet-tension,
rubber thread testers, strain testers,
tension meters
Testing Machines, Inc.
2 Fleetwood Court
Ronkonkoma, NY 11779
Phone: (800) 678-3221
Phone: (631) 439-5400
Fax: (631) 439-5420
Website: www.testingmachines.com
Email: info@testingmachines.com
Instrumentation: Physical testers
Services offered: Technical service,
training
Testo, Inc.
Marko Bruinsma, president
35 Ironia Rd.
Flandors, NJ 07836
Phone: (973) 252-1720
Fax: (973) 252-1729
Instrumentation: Temperature-based
instrumentation
Services offered: Technical service
ThermoHaake
53 W. Century Rd.
Paramus, NJ 07652
Phone: (201) 265-7865
Phone: (800) 631-1369
Fax: (201) 265-1977
Website: www.thermohaake.com
Instrumentation: Torque rheometer
for polymer flow measurements using
miniaturized production equipment; all
units microprocessor controlled; viscometers;
and Seiko Instruments thermal
analysis; circulator products, melt
flow testers, capillary rheometers,
DSC, TGA, DMA, TMA, and DCR
Services offered: Technical service,
training, software programs
Thermovation
William Litzler, Mktg. Mgr.
4800 W. 160th St.
Cleveland, OH 44135
Phone: (216) 267-8020
Fax: (216) 267-9856
Website: www.thermovation.com
Email: solutions@thermovation.com
Instrumentation: Dipping machines,
testing ovens
Thwing-Albert Instrument Co.
Dave Muchorski, director
10960 Dutton Rd.
Philadelphia, PA 19154
Phone: (215) 637-0100
Website: www.thwingalbert.com
Email: sales@thwingalbert.com
Instrumentation: Universal testing
machines, tear testers and sample
cutter
Services offered: Technical service,
training, software programs for company
equipment
Tidland Corporation
Bill Leistritz, sales mgr.
P.O. Box 1008
Camas, WA 98607
Phone: (360) 834-2345
Fax: (360) 834-5865
Email: tidland@tidland.com
Internet: www.tidland.com
Instrumentation: Shafts, chucks, slitting
equipment for unwind, intermediate
and rewind applications
Services offered: Technical service,
training, maintenance contracts
Tinius Olsen Testing Machine
Wayne Hayward, Mktg. Mgr.
P.O. Box 1009
1065 Easton Rd.
Horsham, PA 19044-8009
Phone: (215) 675-7100
Instrumentation: Tension and compression
testing machines
Services offered: Technical service,
software programs
TMI Canada
Lisa Ivanowskoff
6 Ronald Dr.
Montreal, Quebec, Canada H4X 1M8
Phone: (514) 489-8491
Fax: (514) 488-6044
Website: www.testingmachines.com
Email: canada@testingmachines.com
Instrumentation: Physical testers
Services offered: Technical service,
training
Tritech Laboratories
John Semonin, V.P.
1480 Englewood Ave.
Akron, OH 44305
Phone: (330) 798-9300
Fax: (330) 798-9328
Services offered: Rubber testing and
consultation on results; compound
development services; industry training
courses
TSI Incorporated
Brian Osmondson, mktg. mgr.
P.O. Box 64394
St. Paul, MN 55164
Phone: (651) 490-0900
Fax: (651) 490-2748
Website: www.tsi.com
Email: info@tsi.com
Instrumentation: Dimensional measurement
products designed to
improve manufacturing productivity
and enhance product quality; products
include gauges for measuring diameter,
speed and length, flaw detection,
profile and 100% length inspection
systems
Services offered: Technical service
Ueshima Seisakusho Co., Ltd.
c/o Nishiyama
Jack Montes Leston
Suite 216, 111 Great Neck Rd.
Great Neck, NY 11021
Phone: (516) 466-7570
Fax: (516) 468-7572
Website: www2.csr-net.or.jp/hps/ueshima/
Email: JLeston@Nishiyama-USA.com
Instrumentation: Lab testing equipment
to measure dynamic properties
of rubber and plastic for use in
research and development and/or production
Services offered: Installation, training
and support services.
Ultrasonic Arrays
Charles Comstock, mktg. mgr.
18538 142nd Ave., N.E.
Woodinville, WA 98072
Phone: (206) 481-6611
Fax: (206) 481-4455
Instrumentation: Ultrasonic non-contact
thickness and distance measuring
systems, optional SPC software packaging,
computer systems
Services offered: Technical services,
installation service
Union Process, Inc.
Vicki Bailey, Sales Coord.
1925 Akron-Peninsula Rd.
Akron, OH 44313
Phone: (330) 929-3333
Fax: (330) 929-3034
Website: www.unionprocess.com
Email:
unionprocess@unionprocess.com
Instrumentation: Attrition mills, fine
grinding and dispersing equipment
United Calibration Corporation
Jere H. Watson, president
5802 Engineer Dr.
Huntington Beach, CA 92649
Phone: (714) 638-2322
Instrumentation: Materials testing
systems
Services offered: Calibration of test
systems and assorted force equipment
United Testing Systems, Inc.
Robert Erskine
5171 Exchange Dr.
Flint, MI 48507
Phone: (810) 732-2800
Fax: (810) 732-2872
Website: www.tensiletest.com
Email: utsflint@tir.com
Instrumentation: Materials testing
systems for hardness, tensile and
compression
Services offered: Calibration and
certification of hardness and various
force testing systems
VTEC Laboratories Inc.
Paul Kaplan
212 Manida St.
Bronx, NY 10474
Phone: (718) 542-8248
Fax: (718) 542-8759
Email: pkaplan@vteclabs.com
Instrumentation: Flammability test
equipment
Wabash MPI
1569 Morris St.
P.O. Box 298
Wabash, IN 46992-0298
Phone: (219) 563-1184, ext. 249
Fax: (219) 563-1396
Website: www.wabashmpi.com
Email: wabashmpi@corpemail.com
H.W. Wallace Inc.
William Cole, general manager
1245 S. Cleveland-Massillon Rd.,
Suite #2
P.O. Box 4400
Copley, OH 44321
Phone: (330) 670-9453
Fax: (330) 670-9450
Website: www.hwwallace.com
Email: h.w.wallace@usa.net
Instrumentation: Hardness testers
H14 (IRHD); H17A (Shore), micro
hardness testers H12 (IRHD), H17
(Shore); pocket durometers (Shore
and IRHD); densimeters X21; rapid
plastimeter P14; moving die rheometer
D18, compression stress relaxometer
C11; aging chambers O7E
and O14; thickness gauges; testers
for abrasion, compression set, low
temperature, plasticity and resilience;
specimen preparation equipment
Services offered: Calibration, service
and repair of all Wallace instruments,
regional agents located throughout the
U.S.
(see ad on page 63)
Wallace Instruments
Jerry Jackson, director
Dave Reynolds, sales/mktg. mgr.
Unit 4, St. Georges Ind. Est.,
Richmond Rd.
Kingston, England KT2 5BQ
Phone: 44-0-20-8541-4333
Fax: 44-0-20-8549-3374
Website: www.hwwallace.co.uk
Email: hwwallace@compuserve.com
Instrumentation: Hardness testers
H14 (IRHD), H17 (Shore); micro hardness
testers H12(IRHD), H17 (Shore);
pocket durometers (Shore and IRHD);
densimeters X21 ; rapid plastimeter
P14; moving die rheometer D15; compression
stress relaxometer C11 ;
aging chambers O7E and O14; DeMattia
flex testing machine F15/16;
Mooney viscometer v3; thickness
gauges; testers for abrasion, compression
set, low temperature; plasticity
and resilience; specimen preparation
equipment
Services offered: Calibration, service
and repair of all Wallace instruments,
worldwide representation
Webber Manufacturing Co.
Peggy Lovett
8498 Brookville Rd.
P.O. Box 19449
Indianapolis, IN 46219
Phone: (317) 357-8681
Fax: (317) 357-8685
Instrumentation: Ovens, environmental
chambers
Weed Instrument Co., Inc.
Bill Bayer
707 Jeffrey Way
P.O. Box 300
Round Rock, TX 78680
Phone: (512) 434-2900
Fax: (512) 434-2901
Instrumentation: Resistance temperature
detector
Williamson Corp.
W.R. Barron, Mktg. Mgr.
70 Domino Dr.
P.O, Box 1270
Concord, MA 01742-1270
Phone: (978) 369-9607
Fax: (978) 369-5485
Instrumentation: Radiation pyrometers
Wilson Shore Instruments,
Div. of Instron Corp.
Ed Tobolski, vice president, sales
100 Royal St.
Canton, MA 02021
Phone: (617) 575-6000
Fax: (617) 575-5770
Instrumentation: Hardness testers,
testing machines for tensile strength
testing
Services offered: Technical service,
training
Willrich Precision Inst. Co., Inc.
R.G. Chitos
80 Broadway
Cresskill, NJ 07626
Phone: (201) 567-1411
Fax: (201) 567-7470
Email: info@willrich.com
Instrumentation: Analytical and torsion
balances, cord testers, coating
testers, compression testers, durometers,
elasticity testers; dimensional
gauges, other laboratory and testing
equipment
WSF Industries, Inc.
John L. Hettrick, Jr.
P.O. Box 400
Kenmore Branch
Buffalo, NY 14217
Phone: (800) 874-8265
Phone: (716) 692-4930
Fax: (716) 692-4135
Website: www.wsf-inc.com
Email: info@wsf-inc.com
Instrumentation: Autoclaves, process
simulators
Yxlon International
Rita Pontefract, Mktg. Specialist
3400 Gilchrist Rd.
Akron, OH 44260-1221
Phone: (330) 798-4800
Fax: (330) 784-9854
Website: www.yxlon.com
Instrumentation: Image analysis
equipment, tire x-ray inspection systems
Services offered: Technical service,
training and software programs
Carl Zeiss, Inc., Microscope Div.
1 Zeiss Dr.
Thornwood, NY 10594
Phone: (800) 233-2343
Fax: (914) 681-7446
Instrumentation: Microscopes to
examine surface characteristics;
image analysis equipment
Services offered: Technical service,
training, software programs
Zumbach Electronics Corp.
Ernest Henzi
140 Kisco Ave.
Mount Kisco, NY 10549-1412
Phone: (914) 241-7080
Fax: (914) 241-7096
Website: www.zumbach.com
Email: sales@zumbach.com
Instrumentation: Non-contact diameter
gauges, ultrasonic and eddy current
based wall thickness monitoring/
control systems for hose, cable jackets,
tubes and pipes; bench top diameter
measuring instruments for QC;
non-contact sheet thickness gauges;
OD/ID/wall monitoring and control systems
with color display, optical
lump/neckdown detector, spark
testers for cables, inductive wire preheaters;
SQC/SPC data acquisition
reporting and logging systems, plus
PC link networking software
Zwick USA
Bob Donohue, Mktg. Dir.
1620 Cobb International Blvd.
Phone: (770) 420-6555
Fax: (770) 420-6333
Website: www.zwick.com
Email: bob.donohue@zwickusa.com
Instrumentation: Materials testing
instruments and equipment for measuring
tensile, shear, compression,
hardness, rebound, abrasion and rheological
properties
The following grid lists the types of
instrumentation and test equipment
offered by suppliers. Equipment for
testing rubber vulcanizates has been
broken down into stress/strain tests;
time-dependent tests; destructive
tests; durability and electrical properties.
Instruments and test equipment
for the chemical analysis of raw
materials, vulcanized and unvulcanized
rubber included spectroscopy;
chromatography; thermal analysis;
and microscopy.
Akron
Special
Acrolab Aeroglide Machinery,
Ltd. Corp. Inc.
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability *
Fluid resistance
Heat resistance
(static)
Destructive Heat build-up
tests Fatigue *
Abrasion
Crack & cut growth
Time-dependent Dynamic/
tests thermomechanical
Rebound &
resilience
Creep & stress
relaxation
Set
Stress/strain Adhesion
tests Hardness
Tear
Tensile
Physical testing of rubber
Microscopes
Dimensions
Raw materials, vulcanized &
unvulcanized rubber testing *
Processability testing * *
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness
Weathering
resistance
Ozone resistance
Akron
Standard, Alpha Altman
an ITW Techno- Manufac-
Company logies turing Co.
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability
Fluid resistance
Heat resistance
(static)
Destructive Heat build-up
tests Fatigue * *
Abrasion
Crack & cut growth
Time-dependent Dynamic/
tests thermomechanical
Rebound &
resilience
Creep & stress
relaxation
Set
Stress/strain Adhesion
tests Hardness
Tear *
Tensile * *
Physical testing of rubber
Microscopes *
Dimensions
Raw materials, vulcanized &
unvulcanized rubber testing
Processability testing * *
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness
Weathering
resistance
Ozone resistance
Ameteck
PMT, U.S.
B.C. Gauge Ametek
Ames Co. Div. Chatillon
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability
Fluid resistance
Heat resistance
(static)
Destructive Heat build-up
tests Fatigue
Abrasion
Crack & cut growth
Time-dependent Dynamic/
tests thermomechanical
Rebound &
resilience
Creep & stress
relaxation
Set
Stress/strain Adhesion
tests Hardness
Tear
Tensile *
Physical testing of rubber
Microscopes
Dimensions *
Raw materials, vulcanized &
unvulcanized rubber testing
Processability testing *
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness
Weathering
resistance
Ozone resistance
Leverett Applied
A. Test
Anderson Systems, Asylum
Co. Inc. Research
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability
Fluid resistance
Heat resistance
(static) *
Destructive Heat build-up
tests Fatigue * *
Abrasion
Crack & cut growth *
Time-dependent Dynamic/
tests thermomechanical
Rebound &
resilience *
Creep & stress
relaxation * *
Set *
Stress/strain Adhesion *
tests Hardness *
Tear
Tensile *
Physical testing of rubber
Microscopes *
Dimensions
Raw materials, vulcanized &
unvulcanized rubber testing
Processability testing
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness *
Weathering
resistance
Ozone resistance *
Atlas
Material Auto-
Testing mated Automa-
Technology Control tion
LLC Systems Products
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability
Fluid resistance
Heat resistance
(static)
Destructive Heat build-up
tests Fatigue *
Abrasion
Crack & cut growth
Time-dependent Dynamic/
tests thermomechanical *
Rebound &
resilience
Creep & stress
relaxation
Set
Stress/strain Adhesion
tests Hardness
Tear
Tensile
Physical testing of rubber
Microscopes
Dimensions
Raw materials, vulcanized &
unvulcanized rubber testing *
Processability testing *
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness
Weathering
resistance * *
Ozone resistance
Basler
Vision Bayco E.H. Benz
Technologies Ovens Co., Inc.
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability *
Fluid resistance *
Heat resistance
(static) * *
Destructive Heat build-up * *
tests Fatigue *
Abrasion *
Crack & cut growth * *
Time-dependent Dynamic/
tests thermomechanical *
Rebound &
resilience *
Creep & stress
relaxation *
Set *
Stress/strain Adhesion *
tests Hardness *
Tear * *
Tensile *
Physical testing of rubber
Microscopes
Dimensions
Raw materials, vulcanized &
unvulcanized rubber testing *
Processability testing * *
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness * *
Weathering
resistance *
Ozone resistance *
Bohlin
Beta Instru- C.W.
LaserMike ments Brabender
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability
Fluid resistance
Heat resistance
(static)
Destructive Heat build-up
tests Fatigue
Abrasion
Crack & cut growth
Time-dependent Dynamic/
tests thermomechanical *
Rebound &
resilience
Creep & stress
relaxation
Set
Stress/strain Adhesion
tests Hardness
Tear
Tensile
Physical testing of rubber
Microscopes
Dimensions *
Raw materials, vulcanized &
unvulcanized rubber testing
Processability testing * *
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness
Weathering
resistance
Ozone resistance
Bytewise CCS -
Measure- Corporate
ment Carver, Consulting
Systems Inc. Services
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability
Fluid resistance
Heat resistance
(static) *
Destructive Heat build-up
tests Fatigue *
Abrasion *
Crack & cut growth *
Time-dependent Dynamic/
tests thermomechanical *
Rebound &
resilience *
Creep & stress
relaxation *
Set
Stress/strain Adhesion *
tests Hardness *
Tear *
Tensile *
Physical testing of rubber
Microscopes
Dimensions *
Raw materials, vulcanized &
unvulcanized rubber testing *
Processability testing * *
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness *
Weathering
resistance *
Ozone resistance *
CDS Cober Coram
Analytical, Electro- Instru-
Inc. nics ments
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability
Fluid resistance
Heat resistance
(static)
Destructive Heat build-up
tests Fatigue
Abrasion *
Crack & cut growth
Time-dependent Dynamic/
tests thermomechanical
Rebound &
resilience *
Creep & stress
relaxation
Set
Stress/strain Adhesion
tests Hardness *
Tear
Tensile
Physical testing of rubber
Microscopes
Dimensions
Raw materials, vulcanized &
unvulcanized rubber testing * *
Processability testing *
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness
Weathering
resistance
Ozone resistance * *
Dek-Tron Dewes
Dau Chau Scientific Gumbs
Enter- Instru- Die &
prises ments Presses
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability *
Fluid resistance *
Heat resistance
(static)
Destructive Heat build-up
tests Fatigue * *
Abrasion * * *
Crack & cut growth * *
Time-dependent Dynamic/
tests thermomechanical
Rebound &
resilience *
Creep & stress
relaxation *
Set *
Stress/strain Adhesion *
tests Hardness
Tear * *
Tensile * * *
Physical testing of rubber
Microscopes
Dimensions
Raw materials, vulcanized &
unvulcanized rubber testing
Processability testing *
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness *
Weathering
resistance
Ozone resistance
Digital Electronic
Instru- Dillon Development
ments Quantrol Labs
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability *
Fluid resistance
Heat resistance
(static)
Destructive Heat build-up
tests Fatigue *
Abrasion
Crack & cut growth
Time-dependent Dynamic/
tests thermomechanical
Rebound &
resilience
Creep & stress
relaxation *
Set
Stress/strain Adhesion *
tests Hardness
Tear *
Tensile *
Physical testing of rubber
Microscopes *
Dimensions
Raw materials, vulcanized &
unvulcanized rubber testing
Processability testing *
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness *
Weathering
resistance
Ozone resistance
Ferry FMC
Emerson Indus- Corporate
Apparatus, tries Technology
Inc. Inc. Center
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability
Fluid resistance
Heat resistance
(static)
Destructive Heat build-up
tests Fatigue * *
Abrasion *
Crack & cut growth
Time-dependent Dynamic/
tests thermomechanical
Rebound &
resilience
Creep & stress
relaxation
Set
Stress/strain Adhesion
tests Hardness
Tear
Tensile
Physical testing of rubber
Microscopes
Dimensions
Raw materials, vulcanized &
unvulcanized rubber testing *
Processability testing
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness
Weathering
resistance
Ozone resistance
Forte Gearhart
Technology, Freeman Machine
Inc. Company Company
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability
Fluid resistance
Heat resistance
(static)
Destructive Heat build-up
tests Fatigue
Abrasion
Crack & cut growth
Time-dependent Dynamic/
tests thermomechanical
Rebound &
resilience
Creep & stress
relaxation
Set
Stress/strain Adhesion
tests Hardness
Tear * * *
Tensile * *
Physical testing of rubber
Microscopes
Dimensions
Raw materials, vulcanized &
unvulcanized rubber testing
Processability testing *
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness
Weathering
resistance
Ozone resistance
Grecon, Gruenberg
Goettlert Inc. Oven Co.
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability
Fluid resistance
Heat resistance
(static)
Destructive Heat build-up
tests Fatigue
Abrasion
Crack & cut growth
Time-dependent Dynamic/
tests thermomechanical
Rebound &
resilience
Creep & stress
relaxation
Set
Stress/strain Adhesion
tests Hardness
Tear * *
Tensile * *
Physical testing of rubber
Microscopes
Dimensions
Raw materials, vulcanized &
unvulcanized rubber testing *
Processability testing *
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness
Weathering
resistance
Ozone resistance
Hampden
Test Harris
Equipment Instrument Hotpack
Ltd. Corp. Corp.
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability *
Fluid resistance
Heat resistance
(static)
Destructive Heat build-up
tests Fatigue
Abrasion *
Crack & cut growth
Time-dependent Dynamic/
tests thermomechanical
Rebound &
resilience *
Creep & stress
relaxation
Set
Stress/strain Adhesion
tests Hardness *
Tear
Tensile
Physical testing of rubber
Microscopes
Dimensions *
Raw materials, vulcanized &
unvulcanized rubber testing *
Processability testing *
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness
Weathering
resistance *
Ozone resistance *
Imass, Inc. Impakt Indusco
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability
Fluid resistance
Heat resistance
(static)
Destructive Heat build-up
tests Fatigue *
Abrasion *
Crack & cut growth
Time-dependent Dynamic/
tests thermomechanical *
Rebound &
resilience
Creep & stress
relaxation
Set
Stress/strain Adhesion * *
tests Hardness *
Tear *
Tensile *
Physical testing of rubber
Microscopes
Dimensions *
Raw materials, vulcanized &
unvulcanized rubber testing *
Processability testing *
Electrical Dissipation factor *
properties Dielectric strength *
Dielectric constant *
Durability Brittleness
Weathering
resistance
Ozone resistance
J&L
Tool &
Instron Machine, Karder
Corporation Inc. Rubber
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability
Fluid resistance
Heat resistance
(static)
Destructive Heat build-up
tests Fatigue *
Abrasion
Crack & cut growth *
Time-dependent Dynamic/
tests thermomechanical * *
Rebound &
resilience
Creep & stress
relaxation *
Set *
Stress/strain Adhesion *
tests Hardness * *
Tear *
Tensile * *
Physical testing of rubber
Microscopes
Dimensions *
Raw materials, vulcanized &
unvulcanized rubber testing *
Processability testing
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness
Weathering
resistance
Ozone resistance
Kemco
Instru- Leco LMI
ment Co. Corporation Selcom
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability
Fluid resistance
Heat resistance
(static)
Destructive Heat build-up
tests Fatigue
Abrasion
Crack & cut growth
Time-dependent Dynamic/
tests thermomechanical
Rebound &
resilience
Creep & stress
relaxation
Set
Stress/strain Adhesion *
tests Hardness *
Tear
Tensile
Physical testing of rubber
Microscopes *
Dimensions *
Raw materials, vulcanized &
unvulcanized rubber testing *
Processability testing
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness
Weathering
resistance
Ozone resistance
Manufac-
turers Mast/
Supplies Keystone Micro-Vu
Co.
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability
Fluid resistance
Heat resistance
(static)
Destructive Heat build-up
tests Fatigue *
Abrasion *
Crack & cut growth
Time-dependent Dynamic/
tests thermomechanical
Rebound &
resilience
Creep & stress
relaxation
Set
Stress/strain Adhesion
tests Hardness
Tear
Tensile *
Physical testing of rubber
Microscopes *
Dimensions *
Raw materials, vulcanized &
unvulcanized rubber testing *
Processability testing
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness
Weathering
resistance
Ozone resistance *
MTI MTS
MKB Instru- Systems
Industries ments Corp.
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability
Fluid resistance *
Heat resistance
(static) *
Destructive Heat build-up *
tests Fatigue *
Abrasion *
Crack & cut growth *
Time-dependent Dynamic/
tests thermomechanical * *
Rebound &
resilience *
Creep & stress
relaxation * *
Set *
Stress/strain Adhesion *
tests Hardness *
Tear *
Tensile * *
Physical testing of rubber
Microscopes
Dimensions
Raw materials, vulcanized &
unvulcanized rubber testing * *
Processability testing *
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness
Weathering
resistance
Ozone resistance
NewAge
NDC Testing New Era
Infrared Instruments Die Co.
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability
Fluid resistance
Heat resistance
(static)
Destructive Heat build-up
tests Fatigue *
Abrasion
Crack & cut growth
Time-dependent Dynamic/
tests thermomechanical
Rebound &
resilience
Creep & stress
relaxation
Set
Stress/strain Adhesion
tests Hardness *
Tear *
Tensile *
Physical testing of rubber
Microscopes
Dimensions
Raw materials, vulcanized &
unvulcanized rubber testing
Processability testing *
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness
Weathering
resistance
Ozone resistance
Orec
Ozone
Nikon Inc., Ontario Chambers
Instrument Die and
Group Company Monitors
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability
Fluid resistance
Heat resistance
(static)
Destructive Heat build-up
tests Fatigue
Abrasion
Crack & cut growth
Time-dependent Dynamic/
tests thermomechanical
Rebound &
resilience
Creep & stress
relaxation
Set
Stress/strain Adhesion
tests Hardness
Tear *
Tensile * *
Physical testing of rubber
Microscopes
Dimensions
Raw materials, vulcanized &
unvulcanized rubber testing * *
Processability testing
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness
Weathering
resistance
Ozone resistance *
Oxford Pacific
Instru- Transducer Perkin-
ments Corp. Elmer
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability
Fluid resistance
Heat resistance
(static)
Destructive Heat build-up
tests Fatigue
Abrasion
Crack & cut growth
Time-dependent Dynamic/
tests thermomechanical
Rebound &
resilience
Creep & stress
relaxation
Set
Stress/strain Adhesion
tests Hardness *
Tear
Tensile
Physical testing of rubber
Microscopes
Dimensions
Raw materials, vulcanized &
unvulcanized rubber testing * *
Processability testing
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness
Weathering
resistance
Ozone resistance
Piedmont PLV
Polymer Systems Q-Panel
Equipment Inc. Co.
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability
Fluid resistance
Heat resistance
(static)
Destructive Heat build-up
tests Fatigue *
Abrasion
Crack & cut growth
Time-dependent Dynamic/
tests thermomechanical
Rebound &
resilience
Creep & stress
relaxation
Set
Stress/strain Adhesion
tests Hardness
Tear
Tensile *
Physical testing of rubber
Microscopes *
Dimensions *
Raw materials, vulcanized &
unvulcanized rubber testing
Processability testing *
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness
Weathering
resistance *
Ozone resistance *
Frank Rex
Randall Gauge
Quest Co., Inc. Co., Inc.
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability
Fluid resistance
Heat resistance
(static)
Destructive Heat build-up
tests Fatigue
Abrasion
Crack & cut growth
Time-dependent Dynamic/
tests thermomechanical
Rebound &
resilience
Creep & stress
relaxation
Set
Stress/strain Adhesion
tests Hardness *
Tear
Tensile
Physical testing of rubber
Microscopes
Dimensions * *
Raw materials, vulcanized &
unvulcanized rubber testing
Processability testing
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness
Weathering
resistance
Ozone resistance
Rheome-
tric Rubber Satec
Scien- Molding Systems,
tific Technology Inc.
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability
Fluid resistance
Heat resistance
(static)
Destructive Heat build-up
tests Fatigue *
Abrasion
Crack & cut growth
Time-dependent Dynamic/
tests thermomechanical *
Rebound &
resilience
Creep & stress
relaxation * *
Set
Stress/strain Adhesion
tests Hardness
Tear *
Tensile * *
Physical testing of rubber
Microscopes
Dimensions
Raw materials, vulcanized &
unvulcanized rubber testing *
Processability testing *
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant *
Durability Brittleness
Weathering
resistance
Ozone resistance
Schenck
Scanco ScanTech Pegasus
USA, Inc. Corp. Corp.
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability
Fluid resistance
Heat resistance
(static)
Destructive Heat build-up
tests Fatigue *
Abrasion
Crack & cut growth
Time-dependent Dynamic/
tests thermomechanical
Rebound &
resilience *
Creep & stress
relaxation
Set
Stress/strain Adhesion
tests Hardness
Tear
Tensile
Physical testing of rubber
Microscopes *
Dimensions
Raw materials, vulcanized &
unvulcanized rubber testing
Processability testing
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness
Weathering
resistance *
Ozone resistance
Signature Systro- TA
Control nics, Instru-
Systems Inc. ments
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability
Fluid resistance
Heat resistance
(static)
Destructive Heat build-up *
tests Fatigue
Abrasion
Crack & cut growth
Time-dependent Dynamic/
tests thermomechanical *
Rebound &
resilience *
Creep & stress
relaxation *
Set
Stress/strain Adhesion *
tests Hardness
Tear
Tensile *
Physical testing of rubber
Microscopes
Dimensions *
Raw materials, vulcanized &
unvulcanized rubber testing *
Processability testing * * *
Electrical Dissipation factor * *
properties Dielectric strength *
Dielectric constant * *
Durability Brittleness
Weathering
resistance
Ozone resistance
Tavdi
Co., Tech Tenney
Inc. Pro, Inc. Engineering
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability
Fluid resistance
Heat resistance
(static) *
Destructive Heat build-up *
tests Fatigue
Abrasion
Crack & cut growth *
Time-dependent Dynamic/
tests thermomechanical *
Rebound &
resilience *
Creep & stress
relaxation *
Set *
Stress/strain Adhesion *
tests Hardness *
Tear *
Tensile *
Physical testing of rubber
Microscopes *
Dimensions
Raw materials, vulcanized &
unvulcanized rubber testing *
Processability testing *
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness
Weathering
resistance *
Ozone resistance
Testing Thermo- TSI Incor-
Machines Haake porated
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability *
Fluid resistance
Heat resistance
(static)
Destructive Heat build-up
tests Fatigue *
Abrasion *
Crack & cut growth *
Time-dependent Dynamic/
tests thermomechanical *
Rebound &
resilience
Creep & stress
relaxation *
Set
Stress/strain Adhesion *
tests Hardness
Tear *
Tensile *
Physical testing of rubber
Microscopes
Dimensions *
Raw materials, vulcanized & *
unvulcanized rubber testing *
Processability testing *
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness *
Weathering
resistance
Ozone resistance
Thwing- Tinius
Albert Olsen Ultra-
Instrument Testing sonic
Co. Machines Arrays
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability *
Fluid resistance
Heat resistance
(static)
Destructive Heat build-up
tests Fatigue
Abrasion
Crack & cut growth
Time-dependent Dynamic/
tests thermomechanical
Rebound &
resilience *
Creep & stress
relaxation * *
Set *
Stress/strain Adhesion * *
tests Hardness
Tear * * *
Tensile * * *
Physical testing of rubber
Microscopes
Dimensions
Raw materials, vulcanized &
unvulcanized rubber testing
Processability testing
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness *
Weathering
resistance
Ozone resistance
United United
Calibra- Testing
tion Systems, VMI
Corp. Inc. Americas
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability
Fluid resistance
Heat resistance
(static)
Destructive Heat build-up
tests Fatigue * *
Abrasion *
Crack & cut growth
Time-dependent Dynamic/
tests thermomechanical
Rebound &
resilience
Creep & stress
relaxation
Set
Stress/strain Adhesion *
tests Hardness
Tear * *
Tensile * *
Physical testing of rubber
Microscopes
Dimensions
Raw materials, vulcanized &
unvulcanized rubber testing
Processability testing
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness
Weathering
resistance
Ozone resistance
Wabash H.W. Williamson
MPI Wallace Corp.
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability
Fluid resistance
Heat resistance
(static)
Destructive Heat build-up
tests Fatigue *
Abrasion *
Crack & cut growth *
Time-dependent Dynamic/
tests thermomechanical
Rebound &
resilience *
Creep & stress
relaxation *
Set *
Stress/strain Adhesion
tests Hardness *
Tear
Tensile
Physical testing of rubber
Microscopes
Dimensions
Raw materials, vulcanized &
unvulcanized rubber testing
Processability testing * * *
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness
Weathering
resistance
Ozone resistance
Willrich Wilson Carl
Precision Shore Zeiss,
Inst. Co. Instruments Inc.
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability
Fluid resistance
Heat resistance
(static)
Destructive Heat build-up
tests Fatigue *
Abrasion *
Crack & cut growth
Time-dependent Dynamic/
tests thermomechanical
Rebound &
resilience *
Creep & stress
relaxation *
Set
Stress/strain Adhesion *
tests Hardness * *
Tear *
Tensile *
Physical testing of rubber
Microscopes * *
Dimensions *
Raw materials, vulcanized &
unvulcanized rubber testing
Processability testing
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness
Weathering
resistance
Ozone resistance
Zwick USA Zumbach
Instrumentation/equipment
for the testing of rubber
vulcanizates
Durability Permeability
Fluid resistance
Heat resistance
(static)
Destructive Heat build-up
tests Fatigue
Abrasion *
Crack & cut growth
Time-dependent Dynamic/
tests thermomechanical
Rebound &
resilience
Creep & stress
relaxation
Set
Stress/strain Adhesion
tests Hardness *
Tear
Tensile *
Physical testing of rubber
Microscopes
Dimensions
Raw materials, vulcanized &
unvulcanized rubber testing *
Processability testing *
Electrical Dissipation factor
properties Dielectric strength
Dielectric constant
Durability Brittleness
Weathering
resistance
Ozone resistance
|
|
||||||||||||||||||

Printer friendly
Cite/link
Email
Feedback
Reader Opinion