Injection system clamping unit offers both maximized platen support and low height.For many years, users of large rubber injection molding machines with top injection have been interested in machine concepts with a reduced working height, according to according to prep. 1. As stated or indicated by; on the authority of: according to historians. 2. In keeping with: according to instructions. 3. the company. Many solutions for reduction of working and strip intake height have been launched. Side effects Side effects Effects of a proposed project on other parts of the firm. when reducing the working height can result in very large parts or too many moving parts Moving parts are the components of a device that undergo continuous or frequent motion, most commonly rotation. "Parts" only include the mechanical components which does not include fuel, or any other gas or liquid. , lowered support of the mold and injection nozzles that are too long. An ergonomic series of rubber injection molding machines based on a new concept has been designed. The clamping unit of the machine is said to offer both maximized platen support, as well as a low working height. To reach this objective, it was necessary to move the whole combination of clamp cylinder and piston, which causes high horizontal forces on the seals during the phase of acceleration and braking. Because of the design and the small number of moving parts, the clamping unit is said to be very fast and highly reliable. The injection unit offers a low strip intake height while keeping the company's FIFO (First In First Out) A storage method that retrieves the item stored for the longest time. Contrast with LIFO. See traffic engineering methods. FIFO - first-in first-out (first in, first out) injection principle and the short nozzle. Based on these details, the injection process takes place with the smallest pressure losses. Because the nozzle does not have to be retracted re·tract v. re·tract·ed, re·tract·ing, re·tracts v.tr. 1. To take back; disavow: refused to retract the statement. 2. , there are no leaks in this area. The results are said to include precise dosing volume and repeatability. This generation of rubber injection molding machines is called Maplan Ergo Latin, therefore; hence; because. ergo (air-go) conj. Latin for therefore, often used in legal writings. Its most famous use was in "Cogito, ergo sum:" "I think, therefore I am" principle by French philosopher Rene Descartes (1596-1650). and extends the modular Maplan machine series. Maplan/Starlinger North America Circle 23 on card [ILLUSTRATION OMITTED] |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion