Injection press.The V79 rubber injection press, featured in a six-page, four-color brochure, features a closing force of 5,000 kN. No pit is needed for the press, and no platform is needed for the operator. The heating platen A long, thin cylinder in a typewriter or printer that guides the paper through it and serves as a backstop for the printing mechanism to bang into. It is typically made of a hard rubber or rubber-like material. See carriage and typewriter. in the movable traverse is located at operator height, enabling the press to be used without any special adjustments and to be easily relocated, if necessary. New records are said to be set for production changes and dry cycle time. Productivity is said to be improved due to reduced machine cycle time and mold change time. The plastification and injection functions are separate. This principle is said to ensure feeding accuracy and precise temperature control. The horizontal position horizontal position, n a posture in which the body lies flat and the feet and head remain on the same level. Also called supine. of the extruder puts the feed inlet inlet /in·let/ (-let) a means or route of entrance. pelvic inlet the upper limit of the pelvic cavity. thoracic inlet the elliptical opening at the summit of the thorax. within arm's reach reach of the arm; the distance the arm can reach. See also: Arm . Mold thickness adjustment is automatic. The heating platen on the movable traverse is at operator height, and its open position is constant, whatever the mold thickness. Dry cycle time has been reduced as a result of the improvements of the closing unit, the hydraulics hydraulics, branch of engineering concerned mainly with moving liquids. The term is applied commonly to the study of the mechanical properties of water, other liquids, and even gases when the effects of compressibility are small. and the controls. Rep www.rep.tm.fr.com |
|
||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion