Injection molding presses for the rubber industry are highlighted.This designer and manufacturer of injection molding injection molding n. A manufacturing process for forming objects, as of plastic or metal, by heating the molding material to a fluid state and injecting it into a mold. presses for the rubber industry worldwide offers its 16-page, four-color brochure. Vertical rubber injection molding presses feature clamp units from 100 to 1,800 tons that are designed to provide the industry's largest standard daylight opening and to accept a wide range of mold heights. Total installation is said to be simplified and does not require the use of pits or platforms, while still providing a low operating height. Standard injection units from 16 ounces to 90 pounds are described. This design is said to incorporate a unique screw lift mechanism that allows for easy access to screw, nozzle and ball check assembly. Both screw purging and removal are accomplished with minimum downtime, according to according to prep. 1. As stated or indicated by; on the authority of: according to historians. 2. In keeping with: according to instructions. 3. the literature. Other features are said to include higher injection pressures than comparable units, a multiple position screw feed port, a temperature controlled injection nozzle and precise digital shot size control. Advantages of the low profile FIFO (First In First Out) A storage method that retrieves the item stored for the longest time. Contrast with LIFO. See traffic engineering methods. FIFO - first-in first-out (first in, first out) injection unit are said to include better uniformity of compound temperature, simple reciprocating screw design, faster compound changeover (programming) changeover - The time when a new system has been tested successfully and replaces the old system. and less ceiling height and floor space required. Also highlighted in the brochure are splice molding presses featuring a c-frame design and specially suited for extrusion splicing splicing /splic·ing/ (spli´sing) 1. the attachment of individual DNA molecules to each other, as in the production of chimeric genes. 2. RNA s. . The injection unit is compatible with sponge rubber sponge rubber n. A soft, porous rubber used in toys, cushions, gaskets, and weather stripping and as a vibration dampener. compounds. Multiple station splice molding presses from five to 50 tons and capacities of three to 16 ounces are featured. A chart is included in the brochure that illustrates machine specifications. Options for press controls are described, including networking with data acquisition and SPC/SQC. Circle 92 on card |
|
||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion