Printer Friendly

How many tire chains?

Dear Half-Mast,

The CAUTION on Page 2-385 of TM 9-2320-279-10-1 (Nov 86 w/ Ch 10) says when using tire chains on your HEMTT, you must; put; chains on all four rear wheels.

However, Page 9 of TM 9-2320-279-10-HR only authorizes one set; of tire chains, NSN 2540-01-152-7813, For each HEMTT. Since the NSN brings only two chains, we're left; two chains short. What gives?

CW2 M.P.C.

Dear CW2 M.P.C.,

You're right, Sir. A total of four tire chains are needed for each HEMTT.

TACOM is currently changing the hand receipt to reflect this. The unit of issue will be changed from SE (set) to PR (pair) and the QTY AUTH column will be changed from 1 to 2. That authorizes the four tire chains

Make a note until the hand receipt is updated.

Half-Mast
COPYRIGHT 2006 PS Magazine
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2006, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

 Reader Opinion

Title:

Comment:



 

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:HEMTT ...
Publication:PS, the Preventive Maintenance Monthly
Date:Nov 1, 2006
Words:138
Previous Article:Bearing can't bear lube loss.
Next Article:Putting the brakes on brake failure.
Topics:


Related Articles
Performance-based logistics: putting rubber on the ramp.
Chain up tires or pay price, police warn.
Digital bar code bead label identifies tire inventory.
Tire cage NSNs.
Tire chains on fuel tankers OK.
Tire polymers.
Tire chains usage.

Terms of use | Copyright © 2014 Farlex, Inc. | Feedback | For webmasters