Hot runner adapted for injection-blow.R&D Tool and Engineering, Lee's Summit Lee's Summit, city (1990 pop. 46,418), Jackson co., W Mo., in the Kansas City metropolitan area; inc. 1868. The city is an important trucking center and manufactures communications equipment, appliances, pharmaceuticals, and plastic and metal products. , Mo., has adapted its proprietary hot-runner systems for injection-blow molding. The Genesis system was originally launched for single-stage injection stretch-blow molding. It is now aimed at Uniloy Milacron and Jomar injection-blow machines. The Genesis system has a diametrical di·a·met·ri·cal also di·a·met·ric adj. 1. Of, relating to, or along a diameter. 2. Exactly opposite; contrary. di nozzle design for positive tip alignment. No manifold clamp load and no crush ring are required at the Up. An internal preset metering device reportedly balances filling within 95% and allows fast, easy color change. Computer simulation analysis (language, simulation) SIMulation ANalysis - (SIMAN) A simulation language, especially for manufacturing systems, developed by C. Dennis Pegden in 1983. ["Introduction to Simulation using SIMAN", C.D. Pegden et al, McGraw-Hill 1990]. is performed on each system, resulting in excellent temperature uniformity (within 5[degrees] F/3[degrees] C), the company says. Patented "short gate" tech. nology is said to provide an optimal vestige vestige /ves·tige/ (ves´tij) the remnant of a structure that functioned in a previous stage of species or individual development.vestig´ial ves·tige n. on the finished container, and the manifold block is designed for minimal contact with outside surfaces, minimizing heat loss. Tel: (816) 525-0353 [degrees] PT Direct : 929JZ |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion