High speed rubber curing system line.The ExtrudeIR Model 4069E curing system uses high intensity infrared An invisible band of radiation at the lower end of the visible light spectrum. With wavelengths from 750 nm to 1 mm, infrared starts at the end of the microwave spectrum and ends at the beginning of visible light. lamps and polished aluminum reflectors to deliver heat precisely where it is needed for many curing and drying applications on extrusion lines. It is said to be used effectively to provide a surface cure to rubber extrusions, dry adhesives and coatings on rubber or metal, and provides in-process curing between layers of multi-layer cable. Depending on the model selected, diameters as small as 1/4" or as large as 4" can be processed. This system includes, along with the Model 4069 ChamberIR heater, an operator interface pedestal pedestal In Classical architecture, a support or base for a column, statue, vase, or obelisk. It may be square, octagonal, or circular. A single pedestal may also support a group of columns, or colonnade (see podium). with a Watlow PID controller See PID. , a split quartz liner liner /lin·er/ (lin´er) material applied to the inside of the walls of a cavity or container for protection or insulation of the surface. liner see teat cup liner. , height adjustment with [+ or -]15[degrees] of tilt off horizontal, and convenient connection points. Research Circle 3 on card [ILLUSTRATION OMITTED] |
|
||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion