Heated fluid power valve.The Model 2200-396-026 heated fluid control valve A device that modulates the flow of fluid in a conduit in response to a signal from a process measurement control system. is designed for precision control of low to high viscosity materials. It is used in a wide variety of applications for the transfer, delivery and dispensing of heated adhesives, sealants and lubricants lubricants preparations for the lubrication of passages to reduce frictional injury, e.g. oily preparations, including petroleum jelly, lanolin or water-soluble preparations such as methyl cellulose. . The heated flow control valve A flow control valve regulates the flow or pressure of a fluid. Control valves normally respond to signals generated by independent devices such as flow meters or temperature gauges. Control valves are normally fitted with actuators and positioners. is typically used to start and stop the flow of material on the outlet of supply pumps, on the inlet and outlet of pipe manifolds and headers, on the inlet and outlet ports of metering assemblies and on the inlet of dispense hoses. It is also used as a high flow dispense valve. The No-Drip high flow valve design is said to be ideal for controlling the flow of heated adhesives and sealants such as epoxies, polyurethanes, silicones, etc. (Sealant Sealant A thin plastic substance that is painted over teeth as an anti-cavity measure to seal out food particles and acids produced by bacteria. Mentioned in: Tooth Decay sealant see bone sealant. Equipment & Engineering) Circle 102 on card |
|
||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion