Granulators, pulverizers and shredders.

ACME PLASTIC MACHINERY CORP.

Beside-the-press grinders for injection molding from 3 to 50 hp with throats from 8 x 10 in. to 24 x 36 in.

AEC, INC.

Granulators, shredder, film reclaim, and complete size-reduction systems.

AK under-the-press, auger-feed granulators come in 10 models with 6 x 8 in. to 12 x 30 in. cutting chambers, including a 6 x 6 in. model for small molding machines.

Low-speed granulators accept sprues from a robot or conveyor. Cutting chambers from 6 x 8 in. to 12 x 20 in.

Bold series granulators suitable for bottles and other bulky shapes. Tangential-feed cutting chambers of 8 x 10 in. to 30 x 30 in.

Large-part central granulators suitable for high-volume recycling purgings, pipe, and thick-wall parts. Fourteen models of open, solid, or staggered rotor designs. Cutting chambers from 14 x 24 in. to 36 x 72 in.

Shredders have counterrotating shafts with alternating stacked cutters that avoid flyback and maximize energy efficiency. Nine models in single- or two-stage configurations.

Two granulator series feature Opti-Angle cutting-chamber design--a hybrid of the straight drop-through chamber and the tangential chamber. Medium-duty, beside-the-press 1600 series with 16-in. cutting circle has 20- to 34-in.-wide cutting chambers. Heavy-duty, central 2200 series with 22-in. cutting circle has 38- to 66-in.-wide cutting chambers.

AIR PRODUCTS & CHEMICALS, INC.

Cryo-Grind cryogenic grinding and recycling system reduces hard-to-grind materials without contributing to heat history. Material is sprayed with liquid nitrogen (-320 F) on a cooling conveyor. Embrittled material enters grinding mill, where additional nitrogen may be injected to remove heat created by grinding. Nitrogen vapor is recycled.

AUSTRONIC INSTRUMENTS BLOWMOULDING TECHNOLOGIES INC.

Untha shredders with patented four-shaft system provide high throughputs. Additional rollers are said to allo better infeed than two-shaft shredders and to produce smaller particle sizes.

BALL & JEWELL DIV./STERLING, INC.

MVP and BP series beside-the-press granulators in a broad range of sizes and throughputs, New MVP units feature a wider cutting chamber opening and knife design for easier cleanout and maintenance. Double-walled base results in quiet operation. High-torque standard-speed configuration produces high regrind quality. Unique hopper access door speeds cleanout. Units available in several configurations, rotor types, hopper types and motor size.

CG series tangential-feed granulators available from 8 x 12 in. to 16 x 26 in. for large thin-walled bulky parts. VGM1634 granulator utilizes a new cutting chamber inner liner. Standard features include three-blade open rotor, 40-hp motor, and hydraulic hopper opening device. Specialty granulators include the LT series, which features wide cutting chambers from 12 x 32 in. to 12 x 56 in. for online or off-line size reduction of wide sheet and skeletal scrap from thermoforming operations.

New line of electric- and hydraulic-powered shredder/granulator systems especially for size reduction of large and bulky-type parts and scrap like purgings, edge trim and sheet materials. Available as a single-stage shredder or a dual-stage shredder/granulator system. Units available with cutting chambers from 14 x 20 in. to 78 x 43 in. and powered by single or paired motors. Two parallel hex-keyed shafts power counterrotating beds of hook-type cutters, which ingest, break and shred the scrap. High-torque and low-speed rotation provides safer and quieter operation with less flyback and reduced wear on cutting services.

BARRON INC.

Range of grinders for film, sheet, fiber, pipe/profile including integrated feed and discharge systems. Solid rotor construction with chevron, herringbone, slant blade designs, and compensating bed knives. Heavy-duty bearing housings maintain rigidity and proper rotor alignment and withstand high impact stress. Maintenance-free bearings protected by rotating end disks and shaft seals to prevent product contamination.

LOUIS P. BATSON INC.

CBCL/Highfield durably constructed granulators from 5 hp to 150 hp. Pulverizer systems for pregrinding and pulverizing scrap to powder feature easily accessible pulverizing segments for quick change-out. Sant'Andrea Novara industrial shredders in sizes from 5 to 225 hp combine high torque and low speed for consistent size reduction. Custom designs available.

C.S. BELL CO.

Hammer mills for shredding and grinding. Size controlled by screens inserted in the grinding chamber. Modification to standard units available as well as custom fabrication. Sizes from 2 to 15 hp.

CARTER DAY INTERNATIONAL INC.

Offers high-torque shredders.

COMET AUTOMATION SYSTEMS, INC.

Offers a low-speed (30 rpm), screenless S-cutter granulator from Summit Plastek.

CONAIR

Complete line of size reduction systems from beside-the-press models for injection molded parts to units for blow molding applications, to thermoforming granulators, to extrusion granulators for pipe/profile, sheet and film, and heavy-duty central granulators and shredders for all processes.

For meter-feed applications by robot, conveyor or by hand, company supplies the CM, CR and CLS series granulators. New screenless CM series intended for low-throughput sprue and runner applications. CR series features staggered rotor with disposable cassette knives, eliminating resharpening and resetting. CLS beside-the-press granulators also feature staggered rotors with drop-in disposable cassette knives. Low-rpm CLS units produce high-quality regrind from sprues and runners.

New CRS-66 granulator produces high-quality granulate from sprues generated in the production of optical storage media like CDs and DVDs.

CHS general-purpose granulators, suitable for batch feeding of parts and runners including tough engineering resins, feature standard staggered rotors with cassette knives or optional open rotors with scissor-cutting action. Economical CE series has a high-rpm rotor and open design with scissor-cutting, adjustable rotor knives.

CB and CG granulators feature tangential chambers and scissor-cutting open rotors for grinding bulky parts up to 1000 lb/hr. Adjustable rotor knives for ensure a constant cutting circle and include an integral sound enclosure for below-85dbA cutting. Modular CG units available with larger cutting chambers and higher-hp drives.

New CW series central granulators can process up to 2200 lb/hr. Units are easy to maintain and feature a large swing-away front panel that opens to give unimpeded access to rotor and knives. Removable scree, screen cradle and granulate catch-bin are door mounted and swing horizontally away from the rotor. This swing-open feature lowers in-feed height. Cutting chambers can be configured for tangential, modified tangential or restricted feed.

Heavy-duty central granulators for thick-walled parts, pipe and purgings include units able to grind up to 10,000 lb/ hr. Units have scissor-cutting knives, drop-down screen cradles, double flywheels, and a selection of rotor designs. Optional semi-closed, hog-type rotors with four staggered sections and five cutting knives on each section allow for easy processing of purgings and other bulky, thick-walled parts.

UP under-the press granulators for processing thermoforming skeletons and web scrap up to 55 in. wide include efficient nip roll design and separate feed-roll drive motor, a blower for regrind evacuation and an integrated sound enclosure.

CONTROL & METERING LTD.

Granulators from Exact srl of Italy have 8.5- or 20-hp motors and reclaim thermoplastic film and sheet up to 650 ft/min and 440 lb/hr. Continuously remove trim from winder and roll scrap from unwinding frame by feed rolls or preheater. Adjustable in-feed channels fold film into a multilayered strip. Diamond-pitched steel rollers compress the strip into a semi-rigid strand. Cutting wheel rotates against a counterblade, slicing the strand into highly compacted chips. Venturi system conveys chips to storage or back to the extruder.

CRESSWOOD RECYCLING SYSTEMS DIV. OF DUN-RITE TOOL & MACHINE CO.

HF-6850 hopper-fed grinder features a 50-in rotor lenth, a large hopper opening and an expanded cutting chamber dimension to accommodate and process heavy purgings, reject parts, spent distribution packaging, sheets, bulky scrap, film, dense end trims and pipe/profile. Suitable for size reduction or for producing finished regrind to a predetermined particle size. Throughput capacity can be optimized with a choice of cutters, cutter placement and the selection of one of five standard rotor designs.

Also builds several styles of low-speed, single-shaft shredders with openings from 12 to 72 in.

CUMBERLAND ENGINEERING CORP.

Under-the-press, beside-the-press, and central hog-type shredders/granulators, as well as automated reclamation systems, including custom equipment for post-consumer recycling.

Robot- and conveyor-fed granulators include quiet beside-the-press models in throat sizes from 6 x 8 in. to 18 x 36 in. and throughputs from 250 to 1000 lb/hr.

Medium- to heavy-duty granulators have advanced rotor designs for reclaiming bulky parts, film, sheet, filament, foam, and heavy-wall pipe. Sizes from 14 x 26 in. to 24 x 56 in. with capacities to 5000 lb/hr.

Extra-heavy-duty units from 18 x 28 in. to 32 x 50 in. with capacities to 10,000 lb/hr for tough materials and purgings.

In-line reclaiming and densification systems for film sheet, and fiber to 15,000 lb/hr.

Thermoform granulators reclaim skeletal web from the trim press to 1500 lb/hr. Infeed widths of 30 to 66 in.

Shredders/granulators in 16 combinations for 1200 to 5000 lb/hr.

X-Series intermidiate-duty granulators with 24 x 28 in. to 24 x 56 in. opening for injection molded parts, large blow molded parts, film and post-consumer containers.

DISA 

Vortex rotary grinder is a proprietary design for high-volume size reduction of bulk materials.

ECONOGRIND USA

Offers EconoGrind ES Economizer series central granulators with three of five rotor knives and ESL (Economizer Low Speed) beside-the press granulators.

ENTOLETER, INC.

Vertically integrated line of size-reduction equipment and systems.

Precision film Granulators have throat openings from 12 to 60 in. and horsepower ranges from 15 to 300. Feature double-shear cutting with uniform 0.002 to 0.004 knife clearance, class "O" precision bearings, easily removed screen, and a rollaway top for knife maintenance.

Central granulators range from 50 to 300 hp with throat sizes from 25 to 49 in. Can handle all types of material, including 55-gal drums.

EUROHANSA INC.

Offers grinders, shredders and granulators with capacities from 200 lb/hr to 10 tons/hr.

THE FITZPATRICK CO.

Mills in choice of blade designs, screen sizes, and feed devices. Stainless-steel construction, water jacketing for temperature control, and belt-, direct-, or variable-speed drives. Seven sizes from 3 to 150 hp with rotors from 5 x 8 in. to 28 x 17 in.

FitzMill prebreaking equipment reduces materials before subsequent processing. Guilocutter model recommended for heat-sensitive materials.

FOREMOST MACHINE BUILDERS, INC.

HD series grinders range from 10 x 14 in. to 24 x 36 in. throat size and 7.5 to 100 hp. Throughputs from 200 to 2000 lb/hr. Series is designed for beside-the-press applications, central grinding or recycling applications and optionally available in sound attenuated and skewed rotor design.

Full line of high-shear film grinders from 6 x 8 in. to 16 x 48 in. throat size and 3 to 80 hp. Throughputs from 50 to 300 lb/hr. Designed for film, edge trim reclaim, roller feeder applications or any application where scissor-type cutting action is required.

Spiral-cut granulators from 11 x 16 in. to 11 x 32 in. throat size and 20 to 40 hp. Throughput from 550 to 900 lb/hr. Unique rotor design makes unit suitable for grinding scrap, purging, lumps and bottles. Hinged cabinet for easy cleanout.

High-volume line of granulators from 24 x 36 in. to 30 x 45 in. throat size. Throughputs from 1200 to 3000 lb/hr. Series designed for high throughputs of large blow molded parts.

Special-purpose granulators include DSC-18 dual-stage grinder designed for grinding large purging, PG-2415 for large diam. pipe, and SW-0936 for grinding sheet and web up to 36 in. wide. Hot-melt grinders for processing hot thermoplastic from the extruder die without pre-cooling. Customization is an option.

Standard features for all units include a five-year motor warranty. Options include offset or center-feed cutting chamber designs. Full line of accessories and systems encompass solutions in parts and trim pickup and conveying, metal separation, fines separation, and post-consumer recycling.

FRANKLIN MILLER, INC. DELUMPER MIXER DIV.

Delumper Crushers can crush, shred and deagglomerate tough materials like PVC and prevent bridging problems. Units operate with low rpm and little or no temperature rise. Machine can be disassembled quickly for cleaning or repair. All parts are fully replaceable.The L series employs a smooth drum with replaceable teeth that rotate through two stationary sizing combs. Self-cleaning and feeding, it handles lumps up to full inlet opening size. LM series provides higher capacities with multiple cutter sets. LP series features low friction design for difficult, heat-sensitive, sticky or wet agglomerate.

Pipeline Delumper multi-action, straight-through, ultra-compact unit shreds, chops, mixes, disperses, and suspends solids in fluids directly in fully enclosed pipe systems. It rectifies flow properties of slurries; disintegrates tough objects, plastics, chemicals and waxes; and handles brittle, temperature- or pressure-sensitive, abrasive, wet or dry objects.

Taskmaster shredders for reducing bulky items have a fully enclosed dust-tight body of heavy structural steel. Hardened and ground cutter disks and spacers are counterrotating on two parallel hex shafts. Split-body frame allows easy access to cutters. Reduces PET/HDPE bottles, drums, light metals, aluminum and tin cans, and glass jars and bottles.

GETECHA INC.

Granulators in sizes from 0.75 to 250 hp for beside-the-press, central systems, extrusion, blow molding, cleanroom applications, and inline optical disc (CD and DVD) systems.

Lines include the unjammable angled-rotor granulators for beside-the-press and granulation room applications. Offers individual unit granulators and whole size-reduction systems.

GLOUCESTER-CMG RECLAIM PRODUCTS/SERVICES

Heavy-duty chunk, edge-trim, trim-press, beside-the-press, and auger-feed granulators come in sizes from 6 x 8 in. to 24 x 40 in. with drives from 3 to 200 hp. Straight blades and staggered teeth are available. Products include stand-alone granulators, shredders, blowers, cyclones, conveyors, and complete turnkey packages.

Rugged construction, eacy-access cutting chamber, steep-angle, radial knives, and solid high-inertia flywheel. Rotor bearings mounted outside cutting chamber. Tangential feed prevents flyback. Reversible rotor knives standard on auger-feed, beside-the-press, trim-press, and edge-trim granulators. Water cooling optional on all models.

Custom-designed sound enclosures keep noise levels in the mid-70 dbA range. Standard beside-the-press models operate in the mid-80 dbA range.

Trim-press granulators grind thermoforming skeletons in-line or off-line. Also designs for reclaiming wire, profiles, purgings, pipe, and blow moldings. Backed by two-year warranty.

G.F. GOODMAN & SON, INC.

Hydraulic guillotine cutters for size reduction of large moldings and purgings allow use of smaller, less costly granulators. Five models from 19 x 8 in. blade openings to 39 x 30 in. Special guillotines to 60-in. wide available. All models include anti-tie-down, compulsory two-hand controls, and safety guards. Infeed and discharge conveyors and automated guillotine control system available.

GRANUTEC INC.

Auger-Matic granulator/separator for automatic recovery ofsprues and runners from a three-part mold for injection molding machines. Sizes range from 6 x 6 in. cutting chamber with 5-in.-diam. auger to 16 x 32 in. with 10- and 12-in. diam. auger. Designed for maximum ease of cleaning and maintenance. Optional Pick-a-Part Separator can be driven directly from auger shaft without additional motor. Optional hoppers available for simultaneous feeding of other scrap or manual hand-feed directly into cutting chamber, or by robotic feed into an auger trough-mounted hopper.

Operator-less thermoforming granulators designed for integrated automation. Crusher roll system for inline processing of skeletal web/sheet with whole thermoformed parts in place. FRG series feeds directly from thermoformer or payoff stand and features constant tension control system, electro/mechanical device for cyclic start/stop feeding, and ultrasonic sensoring device to monitor web/sheet loop. Multifunction, heavy-duty auger granulators for high throughput reclamation of precut sheet guillontined skeleton.

Beside-the-press and large-throat, low rpm central granulators with throat sizes from 6 x 6 in. to 36 x 48 in. Options include segmented-type rotors, rear-feed chutes, combination hoppers for front hand feed/top robot feed, and feed roll attachments for edge trim. Blower evacuation equipment available to minimize regrind handling. Conveyors available for most granulators with options that include metal detectors, and AMP feedback system to control conveyor speed to the granulator.

High-performance LPZ series granulators for automatic feeding by sprue picker. Accept standard or low rpm drives and suitable for future alternate applications.

GRANUTECH SATURN SYSTEMS

Single-rotor, horizontal ram-fed shredders and low-speed, high-torque rotary shear shredders to preprocess chunks, drools, flashings, purgings, thin film, fiber, and post-consumer plastics into a uniform size for secondary high-speed granulation or feeding directly into extruders.

HAMILTON AVTEC INC.

Granulators and shredders from 35 to 9000 lb/hr include sound enclosure for 80 dbA, swing-down screen cradle, clamshell hopper, rotor flywheel, dust-protected rotor bearings, micro-adjustable bed knives, and safety devices.

HOSOKAWA BEPEX

Pulvocron air-swept pulverizer/classifier permits external fineness adjustment during operation and produces medium-fine, fine, and ultra-fine particles. Three sizes: 20 in., 38 in., and 76 in. Typical products handled include melamine, PVC, polyester, epoxy, and PS.

HOSOKAWA MICRON POWDER SYSTEMS

Mills include Mikro pulverizer, which grinds, blends, and disperses in a single dustless operation. Units use rapidly moving hammers and are suited for both wet and dry grinding.

Vertical-impact Mikro-ACM classifier mills grind heat-sensitive material without coolants. Mikro-Atomizer grinds and conveys material in one operation. Produces ultrafine powders. Mikro-Bantam economical mill for lab, pilot plant, or small batch production grinds samples as small as 10 g at rates of 200 lb/hr.

Laboratory Mikro-ACM grinder/ classifier, a 1-hp self-contained unit, comes with collector, filter cartridge, and instrument panel. Grinds and classifies at 10-200 lb/hr. Meshes from 100 to 40 mirons.

Mikro-Crusher in lab, standard, and heavy-duty sizes for large feedstock. Mikron-Separator air-classifier for particle sizes of 100 mesh to 5 microns. Mikro-Samplmill used in labs for grinding.

HOSOKAWA POLYMER SYSTEMS

Press-side and large part granulators with feed throats from 6 x 8 in. to 16 x 32 in. SPL (below 90 dbA) or Silenator (below 80 dbA) models from 5 to 40 hp. Easy service and cleaning.

Auger-feed granulators with 8 x 8 in. or 10 x 10 in. throats come in SPL or Silenator versions.

E-Series granulators in three sizes (4 x 6 in., 1.5 hp; 6 x 8 in., 5 hp; and 9 x 12 in., 5 hp). Cutting chamber similar to press-side model but for automated feeding or controlled hand feeding.

Shurfeed granulators are for machine-side and central granulation of bulky parts. Material falls in front of rotating knives and is pulled through the cutting action for fast granulation without flyback. Throat sizes of 16 x 21 in. to 24 x 42 in. with up to 75 hp and 2000 lb/hr throughput. Units are soundproofed.

Heavy-duty central granulators in 16 x 26 in., 24 x 41 in., 36 x 56 in., and 36 x 114 in. Horsepower from 50 to 600 and throughputs to 15,000 lb/hr.

Hot-melt granulators (HMG) for extrusion, blow molding, wire insulation, and compounding. Cutting chamber allows air cooling of hot granulate for fast throughput without gumming. Can recover most hot materials to 600 F without precooling. Units include granulator, blower, cyclone separator, and related duct work in 8 x 8 in., 10 x 10 in., and 16 x 27 in. throats; throughputs to 1200 lb/hr.

Feed-roll granulators handle all types of film and thin sheet. Double-angle cut is suited to OPP and LLDPE film. Feed throats to 16 x 26 in.

Slow-speed granulators with cutting chambers 6 x 7 in., 8 x 7 in., 11 x 7 in., 16 x 7 in., and 2-, 3- and 4-hp drives most often used in conjunction with sprue pickers and robots for automated feeding.

AFS fine grinding mills for PVC and PE used for rotational molding. Models to 32 in. with 125 hp drives.

Also de-dusting systems for cleaning regrind.

S. HOWES INC.

The Eureka granulator is a compact, rugged unit with simple construction that offers low operating cost with few moving parts. Material is cut between two cutter rings, which rotate at almost the same speed. Centrifugal action forces the material outward between the cutter rings, shearing it to size and discharging the product quickly, efficiently, and simply.

IMS CO.

Upright granulators feature 20[degrees] double-shear blade action. Standard two- or three-blade rotor or high-efficiency, multibladed, staggered-cut rotor. Handle all plastics from polycarbonate to soft vinyls. Sizes from 5 hp with a 10 x 8.5 in. throat to 20 hp with a 24 x 12 in. throat. Standard heavy-duty casters and sound deadening to 85-90 dbA.

INTERNATIONAL PROCESS EQUIPMENT CO.

Rotomill air-attrition pulverizer reduces chopped plastic to powders without heat buildup. Heat-sensitive materials can be ground without cryogenic processing. Lab and three production sizes from 50 to 800 hp. Also complete systems with feeders, collection, and/or pollution control equipment.

ITALIAN TRADE COMMISSION

Information on a wide range of equipment for size reduction of plastics scrap available from Italian companies.

JACOBSON LLC 

Equipment includes shredders, granulators, bale granulators, and air-swept pulverizer. Hi-Torque shredders use full diameter shafts to reduce large parts before granulation. Also standard granulators and a bale granulator for whole rubber or butyl. Air-swept pulverizer reduces plastics to 100-mesh.

Shredders and granulators offered in stacked arrangement to reduce large sprues, runners, or purgings down to 1/8-in. Air-swept pulverizer accepts pieces and reduces them to around 100 to 240 mesh. Also offers bale granulator for handling whole bales of synthetic cured and uncured rubber down to 100% 1/4-in. at rates of 2000 lb/hr.

JEFFREY DIV. INDRESCO INC.

Hammermills come in rotor sizes from 20 x 12 in. to 40 x 72 in. Both swing-type and rigid hammers available. Shredder frames are rugged, and internal surfaces are protected by removable, wear-resistant steel liners. Integral metal removes most tramp metal.

KEMUTEC GROUP INC.

KEK universal mills can use an extensive selection of pinned-disc and turbine/screen-type grinding media. Milling can take place under inert-gas, cooled, or cryogenic conditions. Mills typically operate in a range from 50-500 microns and up to 100 tons/hr.

KEK centrifugal sifters provide pull-through sieving for scalping oversize and extraneous materials, classifying and conditioning of bulk materials, controlled size reduction of friable materials, and even removal of liquids from slurries, pastes or solids in suspension.

KIEFEL TECHNOLOGIES, INC.

Granulators for continuous inline processing of waste material. Rotary cutter. Serrated infeed rollers. High-grade ground plastic waste with no electrostatic charge.

L-R SYSTEMS

Granulators in sizes from 8 x 6 in. throat and 3-100 hp. Two- and three-bladed open rotors, high-alloy steel knives, noise levels that meet OSHA requirements, and heavy-duty construction.

MAGUIRE PRODUCTS INC.

Radial beside-the-press granulator with rotor that moves in a circular path around a vertical axis at 1750 rpm, creating a high level of centrifugal force to drive scrap material through knives and the granulate through the screens.

Two-stage Shuttle granulator automatically transforms large reject parts, bulky or difficult-to-handle scrap into high-quality regrind. In the first stage large parts are reduced to small pieces using the Shuttle and in the second stage the Radial unit produces the granulate. System was designed to replace more costly heavy-duty granulators and shredder/granulator combinations.

USG high-capacity granulator for large-volume recycling operation and for granulating large and tough materials. Small clearances between knives and screens, high air-flow rate, and high rotor rpm result in high throughputs.

MARATHON REDUCTION SOLUTIONS

Offers single-shaft shredders, grinders, knife hogs, granulators and chippers.

MATSUI AMERICA, INC.

Offers Plas-Aid low-speed, screenless grinders with low noise and dust for beside-the-press use.

MILACRON, INC. PLASTICS TECHNOLOGIES GROUP

Auger-feed, top-feed, and upright granulators in various sizes. Optional soundproofing limits noise to 80 dbA. Two auger-feed models have average throughputs of 175 and 275 lb/hr with throat sizes of 8 x 8 in. and 10 x 10 in.

Two top-feed models suitable for robot feeding offer average throughputs of 150 and 225 lb/hr with throat sizes of 6 x 8 in. and 9 x 12 in.

Upright granulators with 250 to 700 lb/hr throughputs have throat sizes from 6 x 8 in. to 16 x 32 in.

MILLER MANUFACTURING CO.

PVC pregrinders and pulverizers reduce up to 36-in.-O.D., 2-in.-thick scrap to powder. Two sizes of feed chute and pre-grinder, which reduce 20-ft sections of pipe to chips at up to 6000 lb/hr. Chips are pulverized to powder at 1000 lb/hr.

MODITEC

Offers a range of grinders from mini models for small sprues to a model for grinding large car parts.

MONTGOMERY INDUSTRIES INTERNATIONAL

Size-reduction machines for shredding and pulverizing foam and more.

MPG SERVICE & SALES INC.

MP beside-the-press granulators for robot, manual, and conveyor feeding from 1 to 400 hp have short-stop rotor and hinged hoppers. IM granulators with helical bolt-on rotor knives for heavy-duty applications. MA auger granulators for under the press with three-plate molds. MT web granulators f or in-line thermoforming. CS units for heavy-duty applications as well as sheet and film. Shredders from 5 to 100 hp include FL series. Thirty-four models to choose from.

MUNSON MACHINERY CO., INC.

Rotary cutters screen classified to reduce friable and fibrous scrap or in-process materials to granular or semi-fine particle size. Low-speed hi-torque shredders reduce large hard-to-break materials to manageable particle size, reducing volume by 75-80%. Pin mills for fine grinding and lump breaking. De-Clumpers break apart compacted or agglomerated materials for better dispersion or flow.

NETZSCH

Plastcompactors densify fiber, film, and foam; convert hard-to-manage waste into free-flowing densified granules without significant thermal degradation. Three models have throughputs to 1500 lb/hr.

Cutting granulators with rotor diam. to 63 in. and machine widths to 94 in. available with feeding and discharge accessories such as conveyors, bale cutters, guillotines, augers, blowers, cyclones, and dust filters. Rotors available in stainless steel or nickel. Throughputs to 15,000 lb/hr.

Also universal mills, classifier mills, and fluidized-bed jet mills for fine grinding to 2 microns, plus air classifiers for product separation to 2 microns.

NEW HERBOLD INC.

Heavy-duty granulators for lumps and purgings. Compact-design granulators for sheet, film, and bulky parts. High-speed disc pulverizers for medium-hard, impact-resistant, and friable materials. Grinders for specific requirements such as pipe and profile, and hot-melt granulators and guillotines.

PALLMANN PULVERIZERS CO., INC.

Pulverizers include turbo, disc, and counterrotation universal mills used for one-pass or closed-circuit grinding. Interchangeable grinding components. Turbo and disc mills suitable for ambient grinding of heat-sensitive material. Turbo and pin mills available for low-temperature or cryogenic operations.

Granulators in various configurations range in diam. from 6 to 100 in. Also models for long scrap such as siding or window frames, crushers for pipes up to 60-in. diam., and precision knife mills for grinding film.

Densifying systems (PFV) for continuous low-temperature converting of film, foam, and fiber into free-flowing granules.

PERRY VIDEX LLC

Rebuilt, guaranteed granulators from 1 1/2 to 300 hp. Various throat sizes with solid and open rotors, pull-out bin discharge, drum or gaylord high discharge, or pneumatic discharge.

PIERRET NORTH AMERICAN DIV. INC.

Guillotine cutters for chop fibers, films, and tires. Can include infeed conveyors, metal detectors, suction outlets, and take-away conveyors. Cutting widths of 11-20 in., speeds of 50-400 cuts/min, and lengths of 0.25 to 20 in.

PLASTOMER PRODUCTS

Trost Air impact mills pulverize hard, brittle, soft, and agglomerated materials, as well as those with low melting points. Opposing streams of compressed air produce powerful collisions for precise control of particle size. Range from 100 g/hr to 5000 lb/hr, reportedly using 20% less energy than other units. Research model pulverizes 10 g samples.

PRECISION AIRCONVEY CORP.

Three models of compact in-line granulator systems for pneumatic trim handling systems suitable for any film or sheet application. All units available with replaceable screen from 1/8- to 1-in. diam. holes, two to six rotor configurations, cutting clearances less than 0.0002 in., a "shaftless" cutting chamber, open rotor for minimum pressure drop, sealed bearings for long life, flange-mounted motor, and quiet scissor-action knives. Models include 78-GP series (4 x 7 in. inlet), 9832 series (9 x 5.5 in. inlet), and 811-GP series (8 x 11 in. inlet).

Rollmaster series roll guillotines safely cut rolls of film or sheet from hollow cores. During cutting process, a hydraulically powered knife cuts the roll along its longitudinal center line to the top of the core and drops the cut material into a scrap bin or conveyor. The completely interlocked and safety guarded unit reduces labor to strip rolls. Cores can be reused, core paper contamination is eliminated, and multiple rolls of varying diam. can be cut.

PRECISION MACHINERY SYSTEMS, INC.

Toronita densifiers for reducing volume of scrap EPS use high pressure to achieve volume reduction instead of heat or chemicals. Units can densify normal EPS to 18 lb/ft3. Two designs available. One has a horizontal body with material densified by a hydraulic ram against a hydraulically controlled bulkhead door on the front of the machine, producing individual slugs of densified material. Second design replaces the front door with a tapered extension, allowing for a continuous ribbon of densified material to be processed.

PROCESS CONTROL CORP.

Film granulators for in-line reprocessing of scrap feature double-angled, carbide-coated knives. Sizes from 10 x 12 in. to 15 x 27 in. with 20- to 100-hp motors. Open-rotor design efficiently cools for higher through-puts. Part of a complete automatic scrap-recycling system (ASR), which includes roll feeders, trim pickup systems, and refeed machines for putting ground scrap back into the production extruder without repelletization.

QUADRO, INC.

Comil conical mill uses low rpm, centrifugal acceleration, vortex flow pattern. 360[degrees] discharging screen, and specially shaped grinding elements. Provides high lb/hr/hp, low fines even with fragile materials, low dust, quiet operation, and elimination of frictional heat. Capacities from 250 to 50,000 lb/hr or more.

RAPID GRANULATOR, INC.

Beside-the-press, auger, in-line, central, thermoform, hog-type, and hot-melt granulators. Also belt conveyors, sound enclosures and rooms, pneumatic conveyors, and turnkey operations.

Beside-the-press models from 3 x 6 in. to 18 x 31 in., 2- to 60-hp motors, and throughputs from 170 to 2500 lb/hr.

For blow molding, models handle hot parisons or parts. Throat sizes from 7 x 9 in. to 32 x 50 in., 5- to 200-hp motors, and throughputs to 6000 lb/hr. Noise levels of approx. 82 dbA.

Central heavy-duty models in throat sizes from 12 x 24 in. to 32 x 50 in., 40- to 250-hp motors, and throughputs from 1400 to 10,000 lb/hr.

Hog-type, extra-heavy-duty models offer 12 x 24 in. to 24 x 42 in. throats, 50- to 100-hp motors, and 900 to 6000 lb/hr capacities.

Hot-melt models for granulation at 300-500 F from 7 x 9 in. to 32 x 50 in. throats, 5- to 250-hp motors, and 165-3000 lb/hr capacity.

RECYCLING TECHNOLOGIES, INC.

Supplies low-speed, low-noise vertical rotary grinders. Also horizontal grinders and magnetic separators.

REDUCTION ENGINEERING, INC.

Attrition pulverizing systems, ambient and cryogenic systems for milling LLDPE, LDPE, HDPE, PVC, ABS, SAN, PET, nylon, acyrlics and other polymers. All systems equipped with horizontal mill chambers that produce high volume output of quality powder with low energy consumption. All mills have Push/Pull Gap adjusting feature from outside the mill housing so that no shimming of the disks is needed using company's interchangeable one-piece abrasion resistant disks. Systems are PLC-controlled and equipped with large capacity sifter, hinged cyclone, and quick disconnect piping, which enables fast clean down between product changes. Models 75, 100, 400, 400s, 600 and REC 100 cryogenic are available.

RESOURCE RECYCLING SYSTEMS INC. SUB. OF HERBOLD MEEKESHEIM GMBH

From Herbold Meckesheim (Germany) grinders and other size-reduction systems including a specialized shredder for plastics with embedded metal-like tires or window frames. Largest size model HGM60/145 has throughputs from 6000 to 8000 lb/hr.

ROTOGRAN INTERNATIONAL INC.

Full line of granulators with cutting chambers from 8 x 8 in. to 33 x 60 in. and 5- to 300-hp motors. Standard models are heavy-duty and feature tangentially fed, solidly welded chamber; double scissor cutting action on rotor and bed blades; heavy-duty piloted cartridge bearings; easy-access swing-down removable screen and screen cradle; solid steel flywheels on most models; sound insulated, double-wall hopper and base; and safety features to cut off power if attempt is made to open the machine while operating.

Also blower/cyclone systems and fines separator systems.

SHRED-TECH

High-torque shredders and complete reduction systems for processing dense and bulky plastic materials prior to granulating.

SIZE REDUCTION SPECIALISTS CORP.

Bi-Cutter two-stage, press-side, screenless granulator produces quality uniform granules. Low rpm and horsepower allow for low maintenance and low-energy consumption. The first stage has an S-shaped breaking blade that cuts (15 rpm) sprues into smaller pieces that then drop into the second stage. The second stage rotary and stationary cutters cut (45 rpm) the downsized pieces into small, uniform granules. Side plates on the unit swing up for easy access enabline easy clean out.

SPADONE INC.

Fully self-contained, air or hydraulically operated guillotine cutters especially suited for recycling and reclamation. Standard line features 24-, 29-, 39-, 54-, and 60-in. cutting widths with cutting strokes to 40 in. Fully automated cutting lines, which include compacting, are available. Model 24-10 features a 24-in. cutting width and can be fitted with a 10- or 12-in. air cylinder, or a 5-in. hydraulic cylinder delivering over 14,000 lb of force. All cutters are guarded and fitted with anti-tie down, dual pushbuttons for safety.

SSI SHREDDING SYSTEMS, INC.

New or rebuilt two- and four-shaft rotary shear shredders and single-shaft rotary grinders for primary size reduction of loose and baled film, purgings, fibers, engineered resins and other large or bulky materials. Also municipal and scrap compactors and manual tie horizontal balers. Turnkey and custom inline integration with new or existing systems.

STERLING SYSTEMS DIV. OF STERLING BLOWER CO.

Self-contained, self-feeding size-reduction system called the Veloci-Cutter that eliminates other costly, problematic methods of feeding the granulator. Ideal for continuous flow edge trim, scrap bottles, or other scrap parts.

VECOPLAN, LLC

ReTech RG52 rotary grinder handles large rejects and purging without prior reduction and delivers consistently sized, usable particles in one pass. It is low-speed, low-hp, low-noise and features a quick cleanout design, optimized positive-feed controls, oversized outboard rotor shaft bearings and employs an advanced single-cutting rotor with cutter inserts for long wear. Limitted lifetime warranty on rotor cylinder and shaft.

WITTMANN INC.

CMB Wittmann granulators for small beside-the press to large-part-size high-hp units and shredder systems with adjustable rotor and bed knives and constant cutting circles supplied with soundproofing enclosure options.

WYSSMONT CO., INC.

Triskelion lumpbreaker, double Rotocage lumpbreaker, and single Rotocage lumpbreaker for friable solids such as agllomerates, wet cakes, crystals, extrusions, pellets, waxes, fibers, chunks, slabs, and sheets that normally do not require ball, hammer, or pin mills.