Gluing equipment, laminating machines & presses.
GLUING EQUIPMENT, LAMINATING MACHINES & PRESSES
Product Type
(See Codes Size/Capacity
Product Name Below) (Range)
AWED, 1175 Buford Hwy., Ste. 101, Suwanee, GA 30024
Tel: (770) 831-9800 Fax: (770) 831-7404
Estrisa Postformer 17 3.77m (12 ft)
Fravol Contour 7
Edgebander
Advanced Machinery, PO. Box 312, New Castle, DE 19720
Tel: (800) 220-4264 Fax: (302) 322-3479
Piano Vertical 15 43"/49"/55"
Glue Press
Atlantic Machinery Corp., 36 South End Plaza, New Milford, CT 06776
Tel: (860) 354-7200 Fax: (860) 354-0315
Europress Junior 25 3000 x 1850
Europress FUTURA 25 3000 x 1700 mm
3000 x 2000 mm
3500 x 2000 mm
3500 x 2500 mm
Europress S 22,25 3100 x 1600 mm
2500 x 1300 mm
Europress EC 22,25 1300 x 2500 mm
1600 x 3100 mm
FIN SC2R 14 12"-63" wide
FIN SC4/92 14 51"-87" wide
FIN CLN 1600 15 43/4" max opening
FIN Panel 33 5' x 12'
Positioner SP
FIN ST Cross Belt 33 5" width
Cleaner
Black Bros. Co. Inc., 501 Ninth Ave., Mendota, IL 61342
Tel: (815) 539-7451 Fax: (815) 538-2451
No. 40-C spreaders 4 Gluing rolls,
8"-14" long
No. 22-D 7 Gluing rolls,
glue spreaders 8"-110" long
In 6" increments
"C" Mixers (Tank 9 2-400 gal.
type)
No. 700 Series Glue 15 5-125 gal.
Heaters
No. 40-C, No. 775, 13, 14
No. 850, No. 22D &
240 (see above)
No. 490 Panel 15 Brush cleaning
cleaners rolls 26"-7d" long
R.P.P. Hot Roll 16 2'-12' Web widths
Laminators
18 Panel widths 4'-5'
or more
Air Pod 19, 21, 22 Platen capacities:
2' x 4'~' x 12'
Presses, Laminating 25, 27, 28, 29
Machines
R.P.P. Rotary Presses 31 Combining roll
lengths 26"-116" long
Auto Cut 15 68" wide
Cefla Finishing America Inc., 729 Gallimore Dairy Road, High Point,
NC 27265 Tel: (336) 662-9813 Fax: (336) 662-0318
Cefla Spraybotic 1 48"x 96'" panel;
Series stack height up
to 6" max.
Falcioni Kleenspray 1 d8" x 96" panel;
stack height up
to 2" max.
Colonial Saw Co. Inc., 122 Pembroke St., Kingston, MA 02364
Tel: (781) 585-4364 Fax: (781) 585-9375
LK-3, LK-5, LK-10 3, 4, 6, 10, 13, 14 Variable
LK3P, LK-5P, LK-10P 3, 4, 6, 10, 13, 14 Variable
LK-101, LK-102 15 5" profile width
Glue Stations
DPI Advanced Finishing Technologies, 2241 Lake St., Niles, MI 49120
Tel: (269) 684-2259 Fax: (269) 684-2261
Borgonovo Mod 1TS 16, 17, 18 0.6"-4.7"
1TS+2TL Mod 3798,
1TS-CT
Borgonovo Mod 1T80, 16, 17, 18 0.6"-4.7"
3T-96, Mad 4T-96,
2T-96
Borgonovo 16, 17, 18
Cutter/Shaper
Vigano Ecoprint, FDR 16, 17, 18 up to 51"
Vigano EC0 75 16, 17, 18 up to 23.5"
Vigano PFM/S 16, 17, 18 up to 51"
Vigano FD 850 16, 17, 18 up to 33.5"
Vigano PR 800 16, 17, 18 up to 31.5"
DeStafani Type WM 16, 17, 18 0.4"-11.8"
DV-Systems, 6031 Harris Technology Blvd. Charlotte NC 28269
Tel: (704) 598-0020 Fax: (704) 598-3950
Duashpol DUP/P 16, 17, 18 Up to 10"
Duespohl DUP 16, 17, 18 Up to 12-1/2"
Duespohl DUP/F 161,718 Up to 12-7/2"
DUP/Kombi 16, 17, 18 Up to 32"
DSS/R, SSW, RSW 16, 17, 18 Up to 60"
USD
FKM 400 16, 18 Up to 16"
FKM 700 16, 18 Up to 27"
U 250/30 16, 18 Up to 10"
U 330/30 16, 18 Up to 13"
Dankaert Woodworking Machinery Co., 891 Howell Mill Road N.W.,
Atlanta, GA 30318 Tel: (404) 873-6477 Fax: (404) 874-4813
Simimpianti Hot Press 33 4x8 - 5x10 - 5x12
and larger
Simimpianti Membrane 29 4x8 - 5x10 - 5x12
Press and larger
Dieffenbacher, 3100 Cumberland Blvd., Cumberland Center II, Ste. 1470,
Atlanta, GA 30339 Tel: (770) 226-6394 Fax: (770) 226-6397
Spreaders/Roll 14 Working width to l3'
Film Laminators 16 Working width to 8'
Cold Plate Presses 22 4' x 8' to unlim.
Specific press.:
60-725 p.s.i.
Hot Plate Presses 24 See above
Laminating Presses 27 See above
Hydraulic Presses 25 Size 4' x 8' up
to 9' x 172' Spec.
press. 60-1450 p.s.i.
Laboratory Presses 26 Size 3.3' x 3.3' Spec.
press. 290 p.s.i.
and more
Low Pressure 28 4' x 8' to unlim. Spec.
Laminating press. 360-725 p.s.i.
Prepresses 30 Up to 9' x 17' Spec.
press. 360 p.s.i.
Grado gluing system
Alexander Dodds Co., 3000 Walkent Drive N.W., Grand Rapids,
MI 49544 Tel: (616) 784-6000
GP-26F (Dovetail 3 2" - 12" top to bottom
Bluer) 5" - 26" front to back
Doucet Machineries Inc., 340 6th St., Daveluyville, PQ, Canada
G0Z 1C0 Tel: (819) 367-2633 Fax: (819) 367-2100
Door Master Series Door Clamps 5-1/2" x 12-1/2" up to
30" x 72"
Glue Applicator 1, 14 8" L & over 73"
& 20" W
Plate Spreader 13 6" x 48", 6" x 60"
Stock Gluer 13, 14 8" W
Clamp Carrier 2, 22, 25, 31 6-80 sections
6-1/2-20-1/2 W
Clamp rack 2, 22 Up to 4 sections
6, 12, 18, 24 W
Dubois Equipment Co. Inc., P.O. Box 749, Jasper, IN 47547
Tel: (812) 482-3644 Fax: (812) 482-3544
16 24" to 60" nominal
18 24" to 60" nominal
Edgetech Inc., 11933 12th Ave. S., Burnsville, MN 55337
Tel: (952) 881-1925 Fax: (952) 881-0374
PF100 Postformer 17 8' length
PF150 Postformer 17 12' length
PF200 Postformer 17 5"-48" width. Opt.
Series to 72" width.
Double sided.
H5400 Hand Spray 6, 11 25' hose length
AS400 Series 1 76" width cores/
laminate
PC390 Panel Cleaner 15 73" width
LPR561 Laminate 31 62" width
Pressure Roller
DT420 Drying Tunnel 15 Up to 49" wide
IT530 Index Table 75 Up to 50" wide x
165" long
IT540 Index System 15 Up to 50" wide x
165" long
LPR/HT480/481 15, 31 50" wide, optional
62" width
CM610 Manual 15 Up to 145" length
Coving Machine
CM620 Coving Machine 15 Up to 165" length
CM645 Coving Machine 15 Up to 145" length
European Woodworking Machinery Co., P.O. Box 550, Franklinton,
NC 27525 Tel: (919) 494-5197 Fax: (919) 494-7788
Distributes a full line of Buerkle and Hoefer equipment.
Evans Machinery Inc., 5530 N. 51st Ave., Glendale, AZ 85301
Tel: (623) 934-7294 Fax: (623) 934-7384
0110 Post Former 17 12 ft capacity
0138, 0132 Posformer 17 0138-8'--0132-12'
0161, 0190 Coving 17 12'
Machine
0206, 0256 Pinch 27, 31 5 ft width capacity
Roller
0366 Index Table 33 x 12'
15
4253,4263, 4273
Index Table
4260 Panel Laminator 27, 31 5 ft width capacity
4600, 4602 Laminator 27, 31 5 ft width capacity
6100 Postformer 17 48" width capacity
Fletcher Machine Co., 4305 E. U.S. Hwy. 64, Lexington, NC 27292
Tel: (800) 438-1054 Fax: (336) 249-6890
FM-82 16 12" - 60"
Globe Machine Mfg. Co., P.O. Box 2274, Tacoma, WA 98401
Tel: (253) 383-2584 Fax: (253) 572-9672
4,682,122
6, 8, 9, 11, 14,
16, 21, 22, 23
25, 26, 28, 30
9, 11, 12, 14, 16
23, 26, 28, 30
Globe Membrane 29 4.5' -6' wide x 6'-24'
Presses long platen sizes to
Gust. specs.
Globe Pre-presses 30 4' -5' wide by
8' - 10' platen sizes
Other Globe Presses 22, 23, 24, 25 4.5'-6' wide by 6'-24'
27, 28 long platen sizes to
Gust. specs
Globe Glue Spreaders 14 53"- 134' wide.
and Plywood Layup
Globe Glue Mixers 9 175-900 gallon
Graco Inc., P.O. Box 1441, Minneapolis, MN 55440
Tel: (877) 844-7226 Fax: (612) 623-6443
Fast Flo 226-945 11 10 gpm, 100 psi
Husky 715 11 14 gpm, 100 psi
218-618
Standard 226-040 11 2 gpm, 200 psi
President 206-445 11 3 gpm, 1000 psi
Hydrator 226-XXX 15 Up to 3000 psi
Dispensing guns 6 N/A
Therm-O-Flow 20 7 5 gal. capacity
Therm-O-Flow 200 7 55 gal. capacity
8900 Series 15 2 part meter
Proportioner mixing units.
Hess Group America, P.O. Box 537, Point Pleasant, NJ 08742
Tel: (800) 973-4377 Fax: (732) 295-3753
Mobil Edgebanding 19, 33 Up to 30mm thick
Press
Multipress 25, 33 5' high x 8' long
Vertical Frame Clamp and larger
Nora Vertical Frame 25, 33 5' high x 8' long
& larger
Centro V Frame Clamp 25, 33 5' high x 8' long
Kontra Multi Level 19, 33 4', 8' or 12'
Rack st. length
Italpresse USA Inc., 26520 Mallard Way, Punta Gorda, FL 33950
Tel: (888) 743-8505 Fax: (941) 639-1663
Italpresse Membrane 25, 29 Max. 43" x 98"
Press "Formatic"
Italpresse Membrane 25, 29 Max. 57 x 150"
Press "Lockform"
Italpresse Cold 22, 25 Max. 8' x 24'
Presses "PM/DE"
Italpresse Hot 24, 25 Max. 5' x 12'
Presses XL
Italpresse feed 24, 25, 27 Max. 10' x 6'
through press
line "P"
Italpresse feed 24, 25, 27 To specifications
through press
line "Mark C"
Italpresse GL/13-26 23, 24, 25, 27 To specifications
Italpresse CM1000 23, 24, 25, 27, 29 To specifications
Italpresse GL1600 23, 24, 25, 27, 29 To specifications
Joos USA Inc. 680 Madison Ave. Manala pan NJ 07726 Tel: 732 786-0490
Fax: 732 786-0491
Joos Junior 21, 24, 27 4' x 8'
Joos HP-90 Okotherm 24, 25, 27 4' x 8'
Joos HP-150 Okotherm 24, 25, 27 5' x 10'
Joos HP-200 Okotherm 24, 25, 27 5' x 12'
Joos DLP Feedthru 24, 25, 27, 33 On request
Press
Joos DLP OK 24, 25, 27, 33 On request
Feedthru P.
Joos LAP Lab Press 24, 25, 26, On request
27, 33
Osama S2R Glue 14 25-72 inches
Spreader
Osama S4R Glue 14 25-72 inches
Spreader
Osama Aquarious 15
Casati Z-650 Stitcher 4, 8 25"
Casati Z-1000 4, 8 39"
Stitcher
Casati Z-2000 4, 8 48"
Stitcher
Fisher+Ruckle Sprint 4, 8
F+R Omnimaster 4, 8
F+R Omnimaster Plus 4, 8
F+R AF 25, 33 8' - 18'
F+R AFD 25, 33 8' - 18'
F+R ASHO 25, 33 31"
Langzauner LZ 5/2 M Veneer saw 8' - 18'
Langzauner LZ 5/2 E Veneer saw 8' - 18'
Langzauner LZ-4-S Veneer saw 8' - 18'
ELKOM 24 All
3M, Industrial Adhesives & Tapes Div., 3M Center Bldg., 220-5E-06,
St. Paul, MN 55144-1000 Tel: (8001362-3550 Fax: (651) 733-9175
Jet-Weld TCQ 7
Polygun II 6
Polygun EC 7
Polygun LTO 7
Polygun II LT 7
Polygun TCQ 7
EPX Applicator 6
Macoser Woodworking Machinery, P.O. Box 667789, Charlotte,
NC 28266 Tel: (704) 392-0110 Fax: (704) 394-0410
Omec 3 31 gal.
Omec 13 13 gal. x 2
Midwest Group One, 2645 26th Ave. S., Minneapolis, MN 55406
Tel: (612) 721-5347 Fax: (612) 721-1736
Edge Spray System 17 Varies
Hot Melt Glue 7 up to 7' wide
Spreader
Euroform Posfformer 17 8' x 12'
MiniForm Postformer 17 Varies
Standardform 17 Varies
Postformer
Ultraform Postformer 17 Varies
AC3112/20/25 17 3' x 12' Part
Coving machines Size Manual to
Automatic
GS 200/300 Glue 14 4' - 5'
Spreader
PC 140/160 Panel 13, 14, 16, 18 4' x 5' and custom
Cleaner
GS 300/400 Glue 13, 14 4' x 5' and custom
Spreader
RC 400 Roll Coater 13, 14 4' x 5' and custom
PR 1400/1700 Pinch 17, 18, 27, 31 4' x 5' and custom
Roller
RP3130/70 Roller 17, 18, 27, 31 4' x 5' and custom
Press
CL1400/1400A 17, 18, 27, 31 4' x 5' and custom
ORMA-Midwest Presses 22, 24, 25, 27 4'; 5' wide
28, 31
ORMA-Midwest 25, 29 4' x 8', 4' x 10'
PM/CA-Air 2514/3014 and custom
GRECO Mfg. VP4085, 27, 29 4' x 8', 4' x 10',
VP4105, VP4125 4' x 12'
Mikron Woodworking Machinery, 1558 Hwy. 60, Renfrew, ON K7V 3Z6
Canada Tel: (800) 496-4589 Fax: (613) 432-1270
Elliptical Radius 22, 27, 29, 33 Any
Rack
Newman Machine Co., 507 Jackson St., P.O. Box 5467 Greensboro,
NC 27435 Tel: (336) 273-8261 Fax: (336) 273-6939
Hot, cold, Hydraulic Built to customer
hydraulic press spec.
Nordson Corp. 11475 Lakefield Drive, Duluth, GA 30097-1511
Tel: (800) 683-2314 Fax: (866) 667-3329
DuraBlue Adhesive 5, 6, 7, 11 14-297 lbs/hr
Melt.
Foam Melt Applicators 5, 6, 7, 11 15-125 lbs./hr.
E860V Edgebanding Gun 4, 6 Various
H-20, H-200, CF-200. 6, 7, 15 Single & multiple
AD31, AD41 guns modules
PW adiustable profile 6, 27 Various
wrapping slot nozzles
VersaBlue Melters 5, 6, 7, 11 40-227 lbs/hr
AltaBlue TT Melters 5, 6, 7, 11 14-220 lbs/hr
DuraPail Bulk Malter 5, 7, 11, 27 5 gal.
Duradrum Bulk Malter 5, 7, 11, 27 55 gal.
PF 60 V Post Forming 4, 6, 7 Various
Slot Gun
PAM Fastening Technology Inc., P.O. Box 669063, Charlotte, NC 28266
Tel: (704) 394-3141
PAM 190, 220 5, 6, 7 1/2 x 10
PAM 700 5, 6, 7, 11 1-3/4 x 2
PAM 700ES, 7005 5, 6, 7, 11 1-3/4 x 2
PAM 700K, 700KS 5, 6, 7, 11 310 ml tube
Premelters Inc., 120 Keyes Ct., Sanford, FL 32773
Tel: (407) 330-7762 Fax: (407) 330-6843
MM200 Premelter 7, 11 200 lbs/hr
MM500 Premelter 7, 11 500 lbs/hr
MM500HD55 7, 11 600 lbs/hr
NL-65 Laminator 18 Roll width 65";
roll wall thickness
1.5"; roll dia.
14"; roll shaft 4"
Quality VAKuum Products Inc., 43 Bradford St., Concord, MA 01742
Tel: (800) 547-5484 Fax: (978) 369-2928
VAK Pumps 33 (vacuum bag) 1800 lbs/sq ft
VAK Matic 33 (vacuum bag) 1800 lbs/sq ft
Vacuum Bag Press 27, 28, 29 27" - 80": wide
Vacuum 4'-50' length
Vacuum Clamp Vacuum clamp Up to 1800 lbs/
sq. ft.
Vacuum Pumps 11 10 cfm 3/4 hp
5 cfm, 1/3 hp
Vacuum Pumps, 11 15 cfm 10 cfm,
Air-Powered 5 cfm, 3.2 cfm,
1.8 cfm, 20 cfm
RfsProtech, Ogden Group, 1320 Industrial Drive, Matthews,
NC 28105 Tel: (704) 845-2785 Fax: (704) 845-1023
RFS Generators 5 3Kw-200 Kw
RFS SL Series 4, 5, 19 36" x 48"-36" x 60"
RFS EG Series 4, 5, 19, 25 30" x 60"-60" x 168"
RFS SB Series 4, 5, 19, 25 50" x 100"-60" x 240"
RFS AS Series 4, 5, 19, 25 36 x 48"-60" x 168"
RFS CG Series 4, 5, 19, 25 36 x 48"-60" x 168"
RFS GS Series 1, 13, 14 Any
RFS CPP Series 5, 25, 29 24" x 36"-72" x 120"
RFS CP Series 22, 25, 27 1-8 sections
RFS Custom 5 Any
Riebling Machinery, 1511 Rte. 22, Ste. 309, Brewster, NY 10509
Tel: (914) 668-4800 Fax: (845) 350-5848
OTT Presses 14, 22, 24, 25 4' x 8' to 7' x 20
27, 30
SL Woodworking Machinery Inc., 1427-C Boulder Ct., Greensboro,
NC 27409 Tel: (336) 294-9024 Fax: (336) 294-9496
SL DG-Matic 3 6-12 mm dowels
SL GG-Matic 6 39.6 lbs.
SL GG-Plus 5/6 40 lbs.
Shaw Almex USA Inc., 4045 Five Forks Trickum Road, Ste. B8-303,
Lilburn, GA 30047 Tel: (404) 294-0574 Fax: (404) 294-4407
ALMEX 19, 26, 27, 29 4' x 8' to
Thermolaminating 4' x 9'
Membrane Press Custom
ALMEX KD 19, 26, 27, 29 4' x 8' to
One Touch Press 4' x 9', Custom
ALMEX ThermoFormer 19, 26, 27, 29 4' x 8'; 4' x 10';
4' x 12'
ALMEX SmartPin Press
Stiles Machinery Inc., 3965 44th St. S.E., Grand Rapids, MI 49512
Tel: (616) 698-7500 Fax: (616) 698-9411
Wemhoner Eagle 29 1000 doors/shift
Wemhoner Basic 29 1000 doors/shift
1000 Plus
Wemhoner Universal 29 1500 doors/shift
2000
Wemhoner Prof. 3000 29 2000 doors/shift
Friz PUM 120 18 prof. wrapper Machine bed 5-1/4
meters, profiles
10-450mm wide
Kuper ACR Crossrunner 15 cross splicer 60" LG
Kuper ACR speedstar 15 cross splicer 149" LG
Kuper EMZ 15 end trimmer 149" LG
Tapes & Tools, P.O. Box 1195, High Point, NC 27261
Tel: (336) 884-5371 Fax: (336) 841-6493
Hand glue 13, 14 5-1/2" & 7"
spreader spreaders
James L. Taylor Mfg. Co., 108 Parker Ave., Poughkeepsie, NY 12601
Tel: (800) 952-1320 or (845) 452-3780 Fax: (845) 452-0764
Clamp carrier 2, 4 6 sec.-80 sec.
8-1/2'-16-1/2' wide
Auto Clamp Carrier 2, 4 20-80 Sect. 8.5'
ware. to 16.5'
Dual Auto. Carrier 2, 4 60-80 Sect. 8.5',
ware. 10.5'
Glue applicator 1, 14 16'-60', 13" & 20"
Mix-Mizer #12, 9 12 gal./hr.,
#30 & #140 30 gal./hr.
Automatic Pumps 11
Optisizer 15 4 quarter to
8 quarter
Therm O Web Inc., 770 Glenn Ave., Wheeling, IL 60090
Tel: (800) 323-0799
Therm O Web 7, 18, 27 1" to 62" wide
Laminating Systems; unlimited length
S & LS Series
available in 50"
and 62", wide
Unique Machine & Tool Co., 4232 East Magnolia, Phoenix, AZ 85034
Tel: (602) 470-1911 Fax: (602) 470-1916
Glue dispenser 1, 4, 13, 14 2"
Vacuum Pressing Systems, 553 River Road, Brunswick, ME 04011
Tel: (800) 382-4109 or (207) 725-0935 Fax: (207) 725-0932
Vacuum Press 20, 29, 33- 4' x 8', 4' x 10',
vacuum 4' x 12' 5' x 10',
4' x 4', 5' x 12'
Veneer Systems Inc., 100 Rock River Drive, Ste. 104, Buffalo,
NY 14207 Tel: 1800) 825-0840 Fax: 1877) 871-1733
Profile Press 20 36" x 72" to
55" x 135"
Membrane Presses Airbag 36" x 72" to
membrane 27" x 54"
47" x 94"
COMAC profile
wrapping equipment
Voorwood Co., 2350 Barney St., Anderson, CA 96007
Tel: (530) 365-3311 Fax: (530) 365-3315
L110 15 Edges to 1-1/2" thick
L117 15 Edges to 1-112" thick
L108 15 Edges to 1-1/2" thick
L217 double-sided 15 Edges to 1-1/2" thick
L4X 16, 18 Parts to 4" wide
L8X 16, 18 Parts to 12" wide
L-85 16, 18 Parts to 24" wide
L-86 16, 18 Parts to 36" wide
L-73 Contour Foiler 16, 18 Edges to 1-3/4" thick
18" to 72"
P78 Groove Foiler 15 1/2" to 1-1/2" thick
4" to 48" width
L79 End Finisher 15 1/4" to 1-1/2" thick
process. 4" to 48" width
HML-12 Profile 1,618 Parts to 12" wide
Wrapper
Product Name Adhesive Type Feed Speeds
AWED, 1175 Buford Hwy., Ste. 101, Suwanee, GA 30024
Tel: (770) 831-9800 Fax: (770) 831-7404
Estrisa Postformer
Fravol Contour Hotmelt
Edgebander
Advanced Machinery, PO. Box 312, New Castle, DE 19720
Tel: (800) 220-4264 Fax: (302) 322-3479
Piano Vertical N/A N/A
Glue Press
Atlantic Machinery Corp., 36 South End Plaza, New Milford, CT 06776
Tel: (860) 354-7200 Fax: (860) 354-0315
Europress Junior Various Manual
Europress FUTURA Various Manual
Same as above Manual
Same as above Self centering
Same as above CNC
Europress S Various Manual
Various Manual
Europress EC Various Manual
Various Manual
FIN SC2R Various 63 fpm
FIN SC4/92 Various 63 fpm
FIN CLN 1600 N/A 50 ft/min.
FIN Panel N/A Manual or Automatic
Positioner SP
FIN ST Cross Belt N/A 63 ftm
Cleaner
Black Bros. Co. Inc., 501 Ninth Ave., Mendota, IL 61342
Tel: (815) 539-7451 Fax: (815) 538-2451
No. 40-C spreaders Contact; PVA; Urea; Hand feed
Resorcinol; Casein
No. 22-D Same as above plus Single &
glue spreaders Hot Melt & Epoxy variable speed motor
drives 30-200 fpm
"C" Mixers (Tank Urea; Resorcinol; 25-75 rpm Single or
type) Casein var. speed motor
drives
No.700 Series Glue
Heaters
No. 40-C, No.775,
No.850, No.22D &
240 (see above)
No. 490 Panel 30.200 fpm stock feed
cleaners speed; 600-1200 fpm
brush speed
R.P.P. Hot Roll Hot melt film 30-150 fpm
Laminators adhesive
PVA; Epoxy 30-150 fpm
Air Pod
Presses, Laminating
Machines
R.P.P. Rotary Presses Single speed motor
drive 30 fpm; variable
speed motor drive
30-150 fpm
Auto Cut N/A 30-150
Cefla Finishing America Inc., 729 Gallimore Dairy Road, High Point,
NC 27265 Tel: (336) 662-9813 Fax: (336) 662-0318
Cefla Spraybotic Water-based or Variable
Series solvent-based
Falcioni Kleenspray Water-based or Up to 13 fpm
solvent-based
Colonial Saw Co. Inc., 122 Pembroke St., Kingston, MA 02364
Tel: (781) 585-4364 Fax: (781) 585-9375
LK-3, LK-5, LK-10 Water-based or Various
polyurethane
LK3P, LK-5P, LK-10P Water-based or Various or metered
polyurethane
LK-101, LK-102 Water-based or Metered, workpiece-
Glue Stations polyurethane activated
DPI Advanced Finishing Technologies, 2241 Lake St., Niles, MI 49120
Tel: (269) 684-2259 Fax: (269) 684-2261
Borgonovo Mod 1TS 0-60 fpm
1TS+2TL Mod 3798,
1TS-CT
Borgonovo Mod 1T80, 11-60 fpm
3T-96, Mad 4T-96,
2T-96
Borgonovo
Cutter/Shaper
Vigano Ecoprint, FDR Hotmelt 0.39 fpm
Vigano EC0 75 Hotmelt 0-10 fpm
Vigano PFM/S Pressure 0-33 fpm
Vigano FD 850 Pressure 0-33 fpm
Vigano PR 800 Pressure 33-98 fpm
DeStafani Type WM Hotmelt 25-130 fpm
DV-Systems, 6031 Harris Technology Blvd. Charlotte NC 28269
Tel: (704) 598-0020 Fax: (704) 598-3950
Duashpol DUP/P Hotmelt PU, EVA 10-200 fpm
Duespohl DUP Hotmelt, PU, EVA 10-200 fpm
Duespohl DUP/F Hotmelt, PVAC, PU 10-200 fpm
DUP/Kombi Hotmelt, PVAC, PU 10-200 fpm
DSS/R, SSW, RSW 10-200 fpm
USD
FKM 400 PVAC, PUR 0-98 fpm
FKM 700 Hotmelt, PUR 0-98 fpm
U 250/30 PVAC 360[degrees]
U 330/30 PVAC 360[degrees]
Dankaert Woodworking Machinery Co., 891 Howell Mill Road N.W.,
Atlanta, GA 30318 Tel: (404) 873-6477 Fax: (404) 874-4813
Simimpianti Hot Press Various CNC
Simimpianti Membrane Various CNC
Press
Dieffenbacher, 3100 Cumberland Blvd., Cumberland Center II, Ste. 1470,
Atlanta, GA 30339 Tel: (770) 226-6394 Fax: (770) 226-6397
Spreaders/Roll 20-196 fpm
Film Laminators 26-130 fpm
Cold Plate Presses
Hot Plate Presses
Laminating Presses
Hydraulic Presses
Laboratory Presses
Low Pressure
Laminating
Prepresses
Grado gluing system
Alexander Dodds Co., 3000 Walkent Drive N.W., Grand Rapids,
MI 49544 Tel: (616) 784-6000
GP-26F (Dovetail Cold glue Manual
Bluer)
Doucet Machineries Inc., 340 6th St., Daveluyville, PQ, Canada
G0Z 1C0 Tel: (819) 367-2633 Fax: (819) 367-2100
Door Master Series
Glue Applicator All 60 fpm
Plate Spreader
Stock Gluer All 50 fpm
Clamp Carrier
Clamp rack
Dubois Equipment Co. Inc., P.O. Box 749, Jasper, IN 47547
Tel: (812) 482-3644 Fax: (812) 482-3544
Various glue systems 20-200 fpm
Various glue systems 20-200 fpm
Edgetech Inc., 11933 12th Ave. S., Burnsville, MN 55337
Tel: (952) 881-1925 Fax: (952) 881-0374
PF100 Postformer Contact/PVA N/A
PF150 Postformer Contact/PVA N/A
PF200 Postformer Contact/PVA 10-40 fpm
Series
H5400 Hand Spray Water-based contact Hand spray
AS400 Series Contact Variable
PC390 Panel Cleaner N/A 10-60 FPM
LPR561 Laminate Contact Variable 5-25 fpm
Pressure Roller
DT420 Drying Tunnel Water-based contact 3-20 fpm
IT530 Index Table Contact Manual
IT540 Index System Contact 10-750 fpm
LPR/HT480/481 PVA variable 5-25 fpm
CM610 Manual Manual
Coving Machine
CM620 Coving Machine Hot melt for 30 seconds
cove stick (cycle time)
CM645 Coving Machine Hot melt for 30 seconds
cove stick (cycle time)
European Woodworking Machinery Co., P.O. Box 550, Franklinton,
NC 27525 Tel: (919) 494-5197 Fax: (919) 494-7788
Distributes a full line of Buerkle and Hoefer equipment.
Evans Machinery Inc., 5530 N. 51st Ave., Glendale, AZ 85301
Tel: (623) 934-7294 Fax: (623) 934-7384
0110 Post Former Contact one 12' countertop
in 8 minutes
0138, 0132 Posformer Contact/PVA Static. Each bend
less thanaminute
0161, 0190 Coving Hot melt for 1 min per cove
Machine cove stick
0206, 0256 Pinch Contact/PVA 50' per min.
Roller
0366 Index Table Contact
425,342,634,273 PVA Manual, 80' per min
Index Table
4260 Panel Laminator PVA 25' per min (typical)
4600, 4602 Laminator PVA 8-12' per min.
(typical).
6100 Postformer Contact/PVA 12' per min. max
Fletcher Machine Co., 4305 E. U.S. Hwy. 64, Lexington, NC 27292
Tel: (800) 438-1054 Fax: (336) 249-6890
FM-82 0-22 fpm
Globe Machine Mfg. Co., P.O. Box 2274, Tacoma, WA 98401
Tel: (253) 383-2584 Fax: (253) 572-9672
Contact
Urea & Phenol
Urea
Globe Membrane Ureas, polyurethanes
Presses and PVAs to cuss.
specs.
Globe Pre-presses To cuss. specs.
Other Globe Presses Ureas, olyurethanes
and PVAs to cust.
specs.
Globe Glue Spreaders Urea and phenol Up to 400 fpm,
and Plywood Layup Up to 1/2" thick variable
product
Globe Glue Mixers Urea and phenol
Graco Inc., P.O. Box 1441, Minneapolis, MN 55440
Tel: (877) 844-7226 Fax: (612) 623-6443
Fast Flo 226-945 PVA
Husky 715 PVA
218-618
Standard 226-040 PVA
President 206-445 PVA
Hydrator 226-XXX 2K, epoxy, urethane
Dispensing guns Thermoplastics, 2 Adjustable
part, 1 part
Therm-O-Flow 20 Hot melt EVA, Manual & automatic
urethan PSA
Therm-O-Flow 200 See above Manual & automatic
8900 Series Spray, urethane Variable
Proportioner
Hess Group America, P.O. Box 537, Point Pleasant, NJ 08742
Tel: (800) 973-4377 Fax: (732) 295-3753
Mobil Edgebanding PVA
Press
Multipress PVA
Vertical Frame Clamp
Nora Vertical Frame PVA
Centro V Frame Clamp PVA
Kontra Multi Level PVA
Rack
Italpresse USA Inc., 26520 Mallard Way, Punta Gorda, FL 33950
Tel: (888) 743-8505 Fax: (941) 639-1663
Italpresse Membrane Various Manual
Press "Formatic"
Italpresse Membrane Various Shuttle
Press "Lockform"
Italpresse Cold Various Manual
Presses "PM/DE"
Italpresse Hot Various Manual
Presses XL
Italpresse feed Various Variable
through press
line "P"
Italpresse feed Various Variable
through press
line "Mark C"
Italpresse GL/13-26 Various Shuttle
Italpresse CM1000 Various Shuttle
Italpresse GL1600 Various Variable
Joos USA Inc. 680 Madison Ave. Manala pan NJ 07726 Tel: 732 786-0490
Fax: 732 786-0491
Joos Junior PVA, Urea, Other N/A
Joos HP-90 Okotherm Same as above. N/A
Joos HP-150 Okotherm Same as above. N/A
Joos HP-200 Okotherm Same as above. N/A
Joos DLP Feedthru Same as above. Variable
Press
Joos DLP OK Same as above. Variable
Feedthru P.
Joos LAP Lab Press Same as above. N/A
Osama S2R Glue Same as above. Variable
Spreader
Osama S4R Glue Same as above. Variable
Spreader
Osama Aquarious Same as above. N/A
Casati Z-650 Stitcher Hot Melt Thread 30 FPM
Casati Z-1000 Hot Melt Thread 82 FPM
Stitcher
Casati Z-2000 Hot Melt Thread 165 FPM
Stitcher
Fisher+Ruckle Sprint Urea Variable
F+R Omnimaster Urea Variable
F+R Omnimaster Plus Urea Variable
F+R AF N/A N/A
F+R AFD N/A N/A
F+R ASHO N/A N/A
Langzauner LZ 5/2 M N/A Manual
Langzauner LZ 5/2 E N/A Variable
Langzauner LZ-4-S N/A Variable
ELKOM N/A N/A
3M, Industrial Adhesives & Tapes Div., 3M Center Bldg., 220-5E-06,
St. Paul, MN 55144-1000 Tel: (8001362-3550 Fax: (651) 733-9175
Jet-Weld TCQ PUR Varies
Polygun II Hot melt 7-1/2 lbs. per hr.
Polygun EC Thermoplastic 5.5 lb./hr.
Polygun LTO Thermoplastic 2.6 1b./hr.
Polygun II LT Thermoplastic 6.0 lb./hr.
Polygun TCQ Thermoplastic 3-1/21b./hr.
EPX Applicator Epoxy, urethane
Macoser Woodworking Machinery, P.O. Box 667789, Charlotte,
NC 28266 Tel: (704) 392-0110 Fax: (704) 394-0410
Omec Vinyl Varies
Omec Vinyl Varies
Midwest Group One, 2645 26th Ave. S., Minneapolis, MN 55406
Tel: (612) 721-5347 Fax: (612) 721-1736
Edge Spray System Water-based or PVA 10-30 fpm
Hot Melt Glue Hotmelts, PUR 10-60 fpm
Spreader
Euroform Posfformer Contact, PVA Manual, custom
or auto
MiniForm Postformer Contact, PVA Varies
Standardform Contact, PVA 18-30 fpm
Postformer
Ultraform Postformer Contact, PVA 18-50 fpm
AC3112/20/25 Solvent & Water 5-40 fpm
Coving machines Contact, PVA
GS 200/300 Glue PVA, urea resin Varies
Spreader
PC 140/160 Panel N/A 15-75 fpm
Cleaner
GS 300/400 Glue PVA, Urea 16-82 frm
Spreader
RC 400 Roll Coater Urethane epoxy 16-82 frm
PR 1400/1700 Pinch Solvent, water 15-60 fpm
Roller contact, PVA
RP3130/70 Roller PVA 10-30 fpm
Press
CL1400/1400A PVA 15-30 fpm
ORMA-Midwest Presses PVA Varies
ORMA-Midwest Polyurethane 20-30 cycles/hr
PM/CA-Air 2514/3014
GRECO Mfg. VP4085, Polyurethane 15-25 cycles/hr
VP4105, VP4125
Mikron Woodworking Machinery, 1558 Hwy. 60, Renfrew, ON K7V 3Z6
Canada Tel: (800) 496-4589 Fax: (613) 432-1270
Elliptical Radius Any
Rack
Newman Machine Co., 507 Jackson St., P.O. Box 5467 Greensboro,
NC 27435 Tel: (336) 273-8261 Fax: (336) 273-6939
Hot, cold, Customer preference Customer preference
hydraulic press Varied
Nordson Corp. 11475 Lakefield Drive, Duluth, GA 30097-1511
Tel: (800) 683-2314 Fax: (866) 667-3329
DuraBlue Adhesive Thermoplastics Automatic and Manual
Melt.
Foam Melt Applicators Thermoplastics; Automatic and Manual
E860V Edgebanding Gun Thermoplastics; Automatic and Manual
PURs, Sealants
H-20, H-200, CF-200. Thermoplastics Automatic and Manual
AD31, AD41 guns PURs, Sealants
PW adiustable profile Thermoplastics Automatic and Manual
wrapping slot nozzles
VersaBlue Melters Thermoplastics Automatic & manual
AltaBlue TT Melters Thermoplastics Automatic & manual
DuraPail Bulk Malter Thermoplastics, Automatic & manual
PUR, sealants
Duradrum Bulk Malter Thermoplastics, Automatic
PUR, sealants
PF 60 V Post Forming Thermoplastics, Automatic & Manual
Slot Gun PUR
PAM Fastening Technology Inc., P.O. Box 669063, Charlotte, NC 28266
Tel: (704) 394-3141
PAM 190, 220 Hotmelt 2#/hr., 3#/hr.
PAM 700 Hotmelt 5#/hr., 6#/hr.
PAM 700ES, 7005 Hotmelt 5#/hr., 6#/hr.
PAM 700K, 700KS Thermoset hotmelt 5#/hr.
Premelters Inc., 120 Keyes Ct., Sanford, FL 32773
Tel: (407) 330-7762 Fax: (407) 330-6843
MM200 Premelter Hotmelt
MM500 Premelter
MM500HD55 Hotmelt
NL-65 Laminator 120 fpm
Quality VAKuum Products Inc., 43 Bradford St., Concord, MA 01742
Tel: (800) 547-5484 Fax: (978) 369-2928
VAK Pumps Any
VAK Matic Any
Vacuum Bag Press Any
Vacuum Clamp
Vacuum Pumps
Vacuum Pumps, Any
Air-Powered
RfsProtech, Ogden Group, 1320 Industrial Drive, Matthews,
NC 28105 Tel: (704) 845-2785 Fax: (704) 845-1023
RFS Generators
RFS SL Series UF, RF, PVA
RFS EG Series UF, RF, PVA
RFS SB Series UF, RF, PVA
RFS AS Series UF, RF, PVA
RFS CG Series UF, RF, PVA
RFS GS Series UF, RF, PVA Varies
RFS CPP Series UF, RF, PVA
RFS CP Series Any
RFS Custom Any
Riebling Machinery, 1511 Rte. 22, Ste. 309, Brewster, NY 10509
Tel: (914) 668-4800 Fax: (845) 350-5848
OTT Presses Urea, PVA 1 cycle per minute
SL Woodworking Machinery Inc., 1427-C Boulder Ct., Greensboro,
NC 27409 Tel: (336) 294-9024 Fax: (336) 294-9496
SL DG-Matic PVAC Manual control
SL GG-Matic PVAC Trigger control
SL GG-Plus PVAC Electronically
variable
Shaw Almex USA Inc., 4045 Five Forks Trickum Road, Ste. B8-303,
Lilburn, GA 30047 Tel: (404) 294-0574 Fax: (404) 294-4407
ALMEX Various Variable
Thermolaminating
Membrane Press
ALMEX KD Various Variable
One Touch Press
ALMEX ThermoFormer Various Variable
ALMEX SmartPin Press
Stiles Machinery Inc., 3965 44th St. S.E., Grand Rapids, MI 49512
Tel: (616) 698-7500 Fax: (616) 698-9411
Wemhoner Eagle Polyurethane 5 min
Wemhoner Basic Polyurethane 5 min
1000 Plus
Wemhoner Universal Polyurethane 3 min
2000
Wemhoner Prof. 3000 Polyurethane 2.5 min
Friz PUM 120 EVA Hotmelts 140m/min and up
Kuper ACR Crossrunner UF/PVA 16-22 joint/min
Kuper ACR speedstar UF/PVA 16-22 joint/min
Kuper EMZ Glue thread 15-35 mpm
Tapes & Tools, P.O. Box 1195, High Point, NC 27261
Tel: (336) 884-5371 Fax: (336) 841-6493
Hand glue All type adhesives Hand feed
spreader
James L. Taylor Mfg. Co., 108 Parker Ave., Poughkeepsie, NY 12601
Tel: (800) 952-1320 or (845) 452-3780 Fax: (845) 452-0764
Clamp carrier PVA d00-5000 bd.
ft./shift
Auto Clamp Carrier PVA 2000-3000 bd ft/shift
ware.
Dual Auto. Carrier PVA 3000-8000 bd ft/shift
ware.
Glue applicator PVA; Urea; Resorcinol 75'/min.
Mix-Mizer #12, Urea; Resorcinol; PVA
#30 & #140
Automatic Pumps PVA; Urea; Resorcinol
Optisizer 75' per min.
400-5000 bd.
ft./shift
Therm O Web Inc., 770 Glenn Ave., Wheeling, IL 60090
Tel: (800) 323-0799
Therm O Web Hot melt glue web in Up to 40 fpm
Laminating Systems; roll form. EVA/EMA 750-1,000+faces/shift
S & LS Series co-polymer based
available in 50" thermoplastic
and 62", wide
Unique Machine & Tool Co., 4232 East Magnolia, Phoenix, AZ 85034
Tel: (602) 470-1911 Fax: (602) 470-1916
Glue dispenser PVA
Vacuum Pressing Systems, 553 River Road, Brunswick, ME 04011
Tel: (800) 382-4109 or (207) 725-0935 Fax: (207) 725-0932
Vacuum Press PVA, urea resin,
aliphatic resin,
epoxy, resorcinol
Veneer Systems Inc., 100 Rock River Drive, Ste. 104, Buffalo,
NY 14207 Tel: 1800) 825-0840 Fax: 1877) 871-1733
Profile Press All 1-5 min. cycle
Membrane Presses Urea 2-5 min. cycle
melamine
COMAC profile PUR hotmelt glue
wrapping equipment (produces Type 1
glue hood)
Voorwood Co., 2350 Barney St., Anderson, CA 96007
Tel: (530) 365-3311 Fax: (530) 365-3315
L110 Hot transfer foil 18 fpm
L117 Hot transfer foil Variable to 35 fpm
L108 Hot transfer foil Variable to 70 fpm
L217 double-sided Hot transfer foil Variable
L4X PVA Variable to 150 fpm
L8X PVA Variable to 175 fpm
L-85 Hot melt 12 fpm
L-86 Hot melt Variable to 50 fpm
L-73 Contour Foiler Hot transfer foil to l2 fpm
P78 Groove Foiler Hot Transfer Foil Variable 8-35 fpm
L79 End Finisher Hot Transfer Foil Fixed 10.5 fpm
process.
HML-12 Profile Hot melt
Wrapper
Product Name Coverage Uses
AWED, 1175 Buford Hwy., Ste. 101, Suwanee, GA 30024
Tel: (770) 831-9800 Fax: (770) 831-7404
Estrisa Postformer
Fravol Contour
Edgebander
Advanced Machinery, PO. Box 312, New Castle, DE 19720
Tel: (800) 220-4264 Fax: (302) 322-3479
Piano Vertical N/A Edge gluing panels
Glue Press
Atlantic Machinery Corp., 36 South End Plaza, New Milford, CT 06776
Tel: (860) 354-7200 Fax: (860) 354-0315
Europress Junior Gluing of windows and
door parts
Europress FUTURA Same as above
Same as above
Same as above
Same as above
Europress S HPL & Solid wood
Same as above
Europress EC HPL, solid wood
Wood and veneer
Same as above
FIN SC2R Glue spreading of
single- or double-sided
panels
FIN SC4/92 Glue spreading of
single- or double-sided
panels
FIN CLN 1600 N/A Pinch roller
FIN Panel Indexing Table
Positioner SP
FIN ST Cross Belt Panel Cleaner before
Cleaner application
Black Bros. Co. Inc., 501 Ninth Ave., Mendota, IL 61342
Tel: (815) 539-7451 Fax: (815) 538-2451
No. 40-C spreaders One side only High & low pressure
laminating; vinyl; face
& edge gluing
No. 22-D Top or bottom or High and low pressure
glue spreaders top and bottom lam.; fabric; paper;
side, one pass edge banding; face &
edge gluing
"C" Mixers (Tank
type)
No.700 Series Glue
Heaters
No. 40-C, No.775,
No.850, No.22D &
240 (see above)
No. 490 Panel Top and bottom High & low pressure
cleaners side or top side lam. vinyl; fabric;
only paper; hot stamp;
veneer
R.P.P. Hot Roll High & low pressure
Laminators laminating; flush doors
Top side Vinyl; fabric; paper;
hot stamp
Air Pod High and low press.
laminating; veneer;
flush doors; plywood
Presses, Laminating
Machines
R.P.P. Rotary Presses High & low pressure
lam.; vinyl; fabric;
paper; hot stamp; edge
banding
Auto Cut
Cefla Finishing America Inc., 729 Gallimore Dairy Road, High Point,
NC 27265 Tel: (336) 662-9813 Fax: (336) 662-0318
Cefla Spraybotic Tap and edge Spraying glue prior to
Series pressing of raised
panel doors, cabinet
components
Falcioni Kleenspray Top and edge Spraying glue prior to
pressing of raised
panel doors, cabinet
components
Colonial Saw Co. Inc., 122 Pembroke St., Kingston, MA 02364
Tel: (781) 585-4364 Fax: (781) 585-9375
LK-3, LK-5, LK-10 Vinyl, fabric, paper,
veneer, flush doors,
plywood, face and edge
gluing
LK3P, LK-5P, LK-10P Dowel gluing plus
general use
LK-101, LK-102 High-production gluing
Glue Stations of door and window
parts
DPI Advanced Finishing Technologies, 2241 Lake St., Niles, MI 49120
Tel: (269) 684-2259 Fax: (269) 684-2261
Borgonovo Mod 1TS 360 degrees Non-stop transfer of
1TS+2TL Mod 3798, hot stamping. foils
1TS-CT onto extruded plastic
profiles
Borgonovo Mod 1T80, 360 degrees Profile wrapping of
3T-96, Mad 4T-96, special papers & gold
2T-96 leaf
Borgonovo Shapes silicone wheels
Cutter/Shaper & slits paper coils
Vigano Ecoprint, FDR top App. decorative
transfer film on flat
panel wood, glass, PVC,
MDF, alum. Or steel
Vigano EC0 75 top Same as above
Vigano PFM/S top App. protective plastic
film on flat panels
wood, glass, PVC, MDF,
alum. or steel
Vigano FD 850 top Removable protective
film on flat panels
wood, glass, PVC, MDF,
alum. or steel
Vigano PR 800 top Removable protective
film on flat panels
wood, glass, PVC, MDF,
alum. or steel
DeStafani Type WM 360 degrees Profile wrapping on
wood, PVC, MDF, alum.
or chipboard
DV-Systems, 6031 Harris Technology Blvd. Charlotte NC 28269
Tel: (704) 598-0020 Fax: (704) 598-3950
Duashpol DUP/P 360 degrees Profile wrapping
Duespohl DUP 360 degrees Profile wrapping
Duespohl DUP/F 360 degrees Profile wrapping &
surface laminating
DUP/Kombi 360 degrees Profile wrapping
DSS/R, SSW, RSW Profile wrapping,
USD veneer paper, fail
slitter
FKM 400 Fleecing of veneer,
laminates
FKM 700 Same
U 250/30 14-sided profile
wrapping
U 330/30 4-sided profile
wrapping
Dankaert Woodworking Machinery Co., 891 Howell Mill Road N.W.,
Atlanta, GA 30318 Tel: (404) 873-6477 Fax: (404) 874-4813
Simimpianti Hot Press Various
Simimpianti Membrane Various
Press
Dieffenbacher, 3100 Cumberland Blvd., Cumberland Center II, Ste. 1470,
Atlanta, GA 30339 Tel: (770) 226-6394 Fax: (770) 226-6397
Spreaders/Roll
Film Laminators
Cold Plate Presses
Hot Plate Presses
Laminating Presses
Hydraulic Presses
Laboratory Presses
Low Pressure
Laminating
Prepresses
Grado gluing system
Alexander Dodds Co., 3000 Walkent Drive N.W., Grand Rapids,
MI 49544 Tel: (616) 784-6000
GP-26F (Dovetail Full Drawer assembly; opt.
Bluer) taper box, French
dovetailed joints
Doucet Machineries Inc., 340 6th St., Daveluyville, PQ, Canada
G0Z 1C0 Tel: (819) 367-2633 Fax: (819) 367-2100
Door Master Series Assembly, clamping &
squaring of miter, reg.
& rail style doors
Glue Applicator 60-90 R'/min. Face & edge gluing
Plate Spreader Face & edge gluing
Stock Gluer Face & edge gluing
Clamp Carrier 40-6,000 bd. Face & edge gluing
ft./shift
Clamp rack 200 bd. ft./shift Face & edge gluing
Dubois Equipment Co. Inc., P.O. Box 749, Jasper, IN 47547
Tel: (812) 482-3644 Fax: (812) 482-3544
Single & two-sided Vinyl, thin tissues,
pre-saturated papers.
Standard, custom
designs
Single & two-sided Complete custom systems
Edgetech Inc., 11933 12th Ave. S., Burnsville, MN 55337
Tel: (952) 881-1925 Fax: (952) 881-0374
PF100 Postformer Manual postforming
PF150 Postformer Manual postforming
PF200 Postformer Automated postforming
Series
H5400 Hand Spray For spraying water-
based contact adhesive
AS400 Series Automatic spraying of
adhesive on cores and
laminate
PC390 Panel Cleaner Cleans sawdust from
cores and laminate
before adhesive
LPR561 Laminate HPL pressure roller
Pressure Roller
DT420 Drying Tunnel Speeds the drying of
adhesives
IT530 Index Table Indexes laminate
to core
IT540 Index System Semi-automatic indexing
of laminate to core
LPR/HT480/481 Bonding high-pressure
laminates to panels
CM610 Manual Produces coved
Coving Machine backsplashes on
countertops
CM620 Coving Machine Produces coved
backsplashes on
countertops w/automatic
cove stick placement
CM645 Coving Machine Produces coved
backsplashes on
countertops w/automatic
cove stick placement
European Woodworking Machinery Co., P.O. Box 550, Franklinton,
NC 27525 Tel: (919) 494-5197 Fax: (919) 494-7788
Distributes a full line of Buerkle and Hoefer equipment.
Evans Machinery Inc., 5530 N. 51st Ave., Glendale, AZ 85301
Tel: (623) 934-7294 Fax: (623) 934-7384
0110 Post Former Produces fully formed
counters, desk tops,
cabinet doors
0138, 0132 Posformer 1 side Production and custom
postforming
0161, 0190 Coving Produces coved
Machine backsplashes on
countertops
0206, 0256 Pinch 2 sides Rotary press for
Roller bonding high pressure
laminate to sub.
0366 Index Table 1 side Aids in alignment of
laminate to substrate
before bonding
425,342,634,273 2 sides Same as above
Index Table
4260 Panel Laminator 2 sides Heated rotary press
for bonding HPL to
variety of substrates
4600, 4602 Laminator 2 sides Same as above
6100 Postformer Feed-through post
former
Fletcher Machine Co., 4305 E. U.S. Hwy. 64, Lexington, NC 27292
Tel: (800) 438-1054 Fax: (336) 249-6890
FM-82 1 side Continuous roll foil
Globe Machine Mfg. Co., P.O. Box 2274, Tacoma, WA 98401
Tel: (253) 383-2584 Fax: (253) 572-9672
Plywood
Plywood, PB,
flakeboard
Plywood, PB
Globe Membrane Vinyl and veneer
Presses overlays on raised and
profiled substrate
including MDF, HB, PB,
plastic extrusions,
solid wood, metal
Globe Pre-presses For use in plywood,
layup lines before hot
pressing.
Other Globe Presses Flat pressing various
overlay materials on
various substrates
Globe Glue Spreaders Top and hottom Veneer layup syst. for
and Plywood Layup softwood, hardwood
plywood & substrates
Globe Glue Mixers For use in plywood mfg.
Graco Inc., P.O. Box 1441, Minneapolis, MN 55440
Tel: (877) 844-7226 Fax: (612) 623-6443
Fast Flo 226-945 Transfer pump, WB &
solvent
Husky 715 Transfer pump
218-618
Standard 226-040 Transfer & circulating
President 206-445 Transfer & circulating
Hydrator 226-XXX Meter, mix & dispense
2 part PVAs, epoxies,
polyurethanes
Dispensing guns Dispense
Therm-O-Flow 20 Adjustable Converting, assembling,
fabricating
Therm-O-Flow 200 Adjustable Converting, assembling,
fob.
8900 Series Adjustable Adhesive, fabricating
Proportioner
Hess Group America, P.O. Box 537, Point Pleasant, NJ 08742
Tel: (800) 973-4377 Fax: (732) 295-3753
Mobil Edgebanding Lumber bands, veneer,
Press mica etc
Multipress Windows, doors, table
Vertical Frame Clamp tops, chair sides
Nora Vertical Frame Doors, windows and more
Centro V Frame Clamp Entry doors and
windows, etc.
Kontra Multi Level Edge gluing
Rack
Italpresse USA Inc., 26520 Mallard Way, Punta Gorda, FL 33950
Tel: (888) 743-8505 Fax: (941) 639-1663
Italpresse Membrane 3D panel lamination
Press "Formatic" of veneer.
Italpresse Membrane 3D panel lamination w/
Press "Lockform" PVC, veneer & transfer
foils.
Italpresse Cold Lamination of veneer
Presses "PM/DE" & laminates
Italpresse Hot Lamination of veneer
Presses XL & laminates
Italpresse feed Lamination of veneer
through press & laminates
line "P"
Italpresse feed Lamination of veneer,
through press laminate & melamine
line "Mark C"
Italpresse GL/13-26 3D high definition
veneer raise panels
Italpresse CM1000 Compression molded furn
parts from wood waste
Italpresse GL1600 Postforming MDF (i.e.
molded door skins)
Joos USA Inc. 680 Madison Ave. Manala pan NJ 07726 Tel: 732 786-0490
Fax: 732 786-0491
Joos Junior Veneer & HPL lamination
Joos HP-90 Okotherm Veneer, HPL, Composite
Joos HP-150 Okotherm Lamination Veneer, HPL,
Composite lamination
Joos HP-200 Okotherm Veneer, HPL, Composite
lamination
Joos DLP Feedthru Veneer, HPL, Composite
Press lamination
Joos DLP OK Veneer, HPL, Composite
Feedthru P.
Joos LAP Lab Press Lamination Various uses
Osama S2R Glue 2 sided Veneer, HPL, Composite
Spreader lamination
Osama S4R Glue 2 sided Veneer, HPL, Composite
Spreader lamination
Osama Aquarious Cleaning System
Casati Z-650 Stitcher Veneer Splicing
Casati Z-1000 Veneer Splicing
Stitcher
Casati Z-2000 Veneer Splicing
Stitcher
Fisher+Ruckle Sprint Veneer Splicing
F+R Omnimaster Veneer Splicing
F+R Omnimaster Plus Veneer Splicing
F+R AF Veneer Cutting
F+R AFD Veneer Cutting
F+R ASHO Veneer Cutting
Langzauner LZ 5/2 M Veneer Cutting
Langzauner LZ 5/2 E Veneer Cutting
Langzauner LZ-4-S Veneer Cutting
ELKOM Heating Platens
3M, Industrial Adhesives & Tapes Div., 3M Center Bldg., 220-5E-06,
St. Paul, MN 55144-1000 Tel: (8001362-3550 Fax: (651) 733-9175
Jet-Weld TCQ Vinyl, wood, plastic,
glass
Polygun II Vinyl, fabric, paper,
wood
Polygun EC Vinyl, fabric, paper,
wood
Polygun LTO Vinyl, fabric, paper,
wood
Polygun II LT Vinyl, fabric, paper,
wood
Polygun TCQ Vinyl, fabric, paper,
wood
EPX Applicator Wood, metal, plastic
Macoser Woodworking Machinery, P.O. Box 667789, Charlotte,
NC 28266 Tel: (704) 392-0110 Fax: (704) 394-0410
Omec Full Furniture and drawer
production
Omec Full Furniture and drawer
production
Midwest Group One, 2645 26th Ave. S., Minneapolis, MN 55406
Tel: (612) 721-5347 Fax: (612) 721-1736
Edge Spray System Edge Furniture, countertops
prior to posdormer.
Hot Melt Glue Top and Bottom Wood, metal, foam,
Spreader honeycomb, hardboard,
HPL
Euroform Posfformer Edge Countertops, desks,
millwork
MiniForm Postformer Edge Kitchen countertops,
office furniture,
millwork
Standardform Edge Intermediate volume
Postformer kitchen countertops,
office furniture, etc.
Ultraform Postformer Edge Large volume kitchen
countertops, office
furniture, etc.
AC3112/20/25 Single Surface Forming a backsplash
Coving machines
GS 200/300 Glue Total Laminating
Spreader
PC 140/160 Panel Double-sided Brush cleaning of
Cleaner panels
GS 300/400 Glue Single, double sided Panel laminating
Spreader
RC 400 Roll Coater Single, double sided Temperature controlled
applications
PR 1400/1700 Pinch Cold pinch adhesives Flat panel laminating
Roller
RP3130/70 Roller Hot pinch adhesives Flat panel laminating
Press
CL1400/1400A Single-sided Countertop laminating
laminating
ORMA-Midwest Presses Total Sheet lamination
ORMA-Midwest Single surface Doors & parts, 3D
PM/CA-Air 2514/3014 laminating
GRECO Mfg. VP4085, Single surface 3D laminating
VP4105, VP4125 horizontal parts, doors
Mikron Woodworking Machinery, 1558 Hwy. 60, Renfrew, ON K7V 3Z6
Canada Tel: (800) 496-4589 Fax: (613) 432-1270
Elliptical Radius Lam. curved mouldings
Rack & jambs
Newman Machine Co., 507 Jackson St., P.O. Box 5467 Greensboro,
NC 27435 Tel: (336) 273-8261 Fax: (336) 273-6939
Hot, cold, Varied
hydraulic press
Nordson Corp. 11475 Lakefield Drive, Duluth, GA 30097-1511
Tel: (800) 683-2314 Fax: (866) 667-3329
DuraBlue Adhesive Variable Vinyl, fabric, paper,
Melt. edgeband.
Foam Melt Applicators Variable Same as above
E860V Edgebanding Gun Variable Same as above
H-20, H-200, CF-200. Variable Same as above
AD31, AD41 guns
PW adiustable profile Variable Same as above
wrapping slot nozzles
VersaBlue Melters Variable Vinyl, fabric, paper,
edgebanding, other
AltaBlue TT Melters Variable Vinyl, fabric, paper,
edgebanding
DuraPail Bulk Malter Variable Vinyl, fabric, paper,
edgebanding, other
Duradrum Bulk Malter Variable Vinyl, fabric, paper,
edgebanding, other
PF 60 V Post Forming Variable Vinyl, fabric, paper,
Slot Gun edgebanding, other.
PAM Fastening Technology Inc., P.O. Box 669063, Charlotte, NC 28266
Tel: (704) 394-3141
PAM 190, 220 Bead Hand held
PAM 700 Bead Hand held
PAM 700ES, 7005 Spray Hand held
PAM 700K, 700KS Bead Hand held
Premelters Inc., 120 Keyes Ct., Sanford, FL 32773
Tel: (407) 330-7762 Fax: (407) 330-6843
MM200 Premelter
MM500 Premelter
MM500HD55
NL-65 Laminator
Quality VAKuum Products Inc., 43 Bradford St., Concord, MA 01742
Tel: (800) 547-5484 Fax: (978) 369-2928
VAK Pumps Veneering
VAK Matic Veneering
Vacuum Bag Press Veneering, curved &
flat pieces. Bent
laminations
Vacuum Clamp Template routing, etc.
Vacuum Pumps Vacuum bag veneering
General vacuum use
Vacuum Pumps, Vacuum bag veneering
Air-Powered vacuum clamping
RfsProtech, Ogden Group, 1320 Industrial Drive, Matthews,
NC 28105 Tel: (704) 845-2785 Fax: (704) 845-1023
RFS Generators Multi-purpose
RFS SL Series Edge gluing
RFS EG Series Edge & face gluing
RFS SB Series Edge gluing
RFS AS Series Banding & assembly
RFS CG Series Continuous gluing &
cutting to size of
multiple wood panels
RFS GS Series Varies Glue spreader
RFS CPP Series Curved plywood &
particleboard
RFS CP Series Cold press solid wood
& lam.
RFS Custom Any
Riebling Machinery, 1511 Rte. 22, Ste. 309, Brewster, NY 10509
Tel: (914) 668-4800 Fax: (845) 350-5848
OTT Presses Laminating surfaces to
chipboard, hardwood
particleboard, etc.
SL Woodworking Machinery Inc., 1427-C Boulder Ct., Greensboro,
NC 27409 Tel: (336) 294-9024 Fax: (336) 294-9496
SL DG-Matic 1 shot per hole Inserts glue & dowels
SL GG-Matic Continuous bead All
SL GG-Plus Drops or beads All
Shaw Almex USA Inc., 4045 Five Forks Trickum Road, Ste. B8-303,
Lilburn, GA 30047 Tel: (404) 294-0574 Fax: (404) 294-4407
ALMEX Veneer and vinyl
Thermolaminating overlays on a 3D solid
Membrane Press mate of MDF, HDF, PB,
wood, plastic or metal
ALMEX KD
One Touch Press
ALMEX ThermoFormer 3D lamination of
thermofoils PVC and
vinyl films
ALMEX SmartPin Press
Stiles Machinery Inc., 3965 44th St. S.E., Grand Rapids, MI 49512
Tel: (616) 698-7500 Fax: (616) 698-9411
Wemhoner Eagle 3D lam. thermofoil &
veneer
Wemhoner Basic 3D lamination of
1000 Plus thermofoil
Wemhoner Universal 3D lamination of
2000 thermofoil
Wemhoner Prof. 3000 3D lamination of
thermofoil
Friz PUM 120 Surface lamination &
profile wrapping
Kuper ACR Crossrunner All veneers
Kuper ACR speedstar Face veneers
Kuper EMZ All veneers
Tapes & Tools, P.O. Box 1195, High Point, NC 27261
Tel: (336) 884-5371 Fax: (336) 841-6493
Hand glue Gluing panel surfaces
spreader and edges
James L. Taylor Mfg. Co., 108 Parker Ave., Poughkeepsie, NY 12601
Tel: (800) 952-1320 or (845) 452-3780 Fax: (845) 452-0764
Clamp carrier Face and edge gluing
Auto Clamp Carrier Face & edge gluing
ware.
Dual Auto. Carrier Edge gluing
ware.
Glue applicator 75 sq. ft. per min. Face and edge gluing
Mix-Mizer #12, 50 gph Mix resin & catalyst
#30 & #140
Automatic Pumps Pump PVA, urea, and
resorcinol
Optisizer Sizing panels from
random stock
Therm O Web Inc., 770 Glenn Ave., Wheeling, IL 60090
Tel: (800) 323-0799
Therm O Web 100% Melamine, HPL (all)
Laminating Systems; consistent glue papers, fabrics, backed
S & LS Series coverage veneers, hardboard,
available in 50" lauan, synthetics &
and 62", wide metals
Unique Machine & Tool Co., 4232 East Magnolia, Phoenix, AZ 85034
Tel: (602) 470-1911 Fax: (602) 470-1916
Glue dispenser Edge gluing
115/1/160 no air
required
Vacuum Pressing Systems, 553 River Road, Brunswick, ME 04011
Tel: (800) 382-4109 or (207) 725-0935 Fax: (207) 725-0932
Vacuum Press Flat & curved panel Presses veneer plus
veneers & forms curved
panels as well as
performing certain
types of moulding
pressing
Veneer Systems Inc., 100 Rock River Drive, Ste. 104, Buffalo,
NY 14207 Tel: 1800) 825-0840 Fax: 1877) 871-1733
Profile Press Press veneer on
vinyl/paper to profiled
cores
Membrane Presses Millwork, furniture
COMAC profile
wrapping equipment
Voorwood Co., 2350 Barney St., Anderson, CA 96007
Tel: (530) 365-3311 Fax: (530) 365-3315
L110 Edges MDF, particleboard
L117 Edges MDF, particleboard
L108 Edges MDF, particleboard
L217 double-sided Edges MDF, particleboard
L4X 4 sides Lineal mouldings,
furniture & cabinet
parts. Low pressure
laminating, vinyl,
paper, veneer.
L8X 4 sides Lineal mouldings,
furniture & cabinet
parts, drawer sides.
Low pressure laminating
vinyl, paper, veneer.
L-85 Topside Papers pre-coated, dry
transfer foil
L-86 Topside Applies hot transfer
foil to large MDF
parts or multiples of
sm. pts.
L-73 Contour Foiler 360[degrees] Edges, MDF
Particleboard
P78 Groove Foiler 3/8" dpx MDF, particleboard,
1-1/2" wide wood
groove/plough cut
L79 End Finisher Up to 1-7/8" MDF, particleboard
process. face width
HML-12 Profile Lineal mouldings,
Wrapper furniture and cabinet
parts with vinyl,
paper and veneers
Characteristics
Product Name (Other comments)
AWED, 1175 Buford Hwy., Ste. 101, Suwanee, GA 30024
Tel: (770) 831-9800 Fax: (770) 831-7404
Estrisa Postformer No scorcher
Fravol Contour
Edgebander
Advanced Machinery, PO. Box 312, New Castle, DE 19720
Tel: (800) 220-4264 Fax: (302) 322-3479
Piano Vertical Suited for small to medium shops.
Glue Press
Atlantic Machinery Corp., 36 South End Plaza, New Milford, CT 06776
Tel: (860) 354-7200 Fax: (860) 354-0315
Europress Junior Hydraulically operated clamp, manual
and automatic feed, self-centering,
numerically controlled.
Europress FUTURA Heavy duty, same as above
Heavy duty, same as above
Heavy duty, same as above
Heavy duty, same as above
Europress S Cold press for laminate pressing
Same as above
Europress EC Hot/cold press for laminate and
veneer pressing
Same as above
FIN SC2R Two-roller model
FIN SC4/92 Four-roller model
FIN CLN 1600
FIN Panel Semi-automatic or Automatic
Positioner SP
FIN ST Cross Belt
Cleaner
Black Bros. Co. Inc., 501 Ninth Ave., Mendota, IL 61342
Tel: (815) 539-7451 Fax: (815) 538-2451
No. 40-C spreaders Single & double hold-down rolls
available
No. 22-D Options available for special
glue spreaders applications.
"C" Mixers (Tank
type)
No.700 Series Glue Steam or electric heat adjustable to
Heaters 160[degrees]F
No. 40-C, No.775,
No.850, No.22D &
240 (see above)
No. 490 Panel Tampico-Horsehair or Polypropylene
cleaners brushes available
R.P.P. Hot Roll Continuous feed (webs)
Laminators
Continuous feed (webs)
Air Pod 10-50 & 80 psi laminating pressures,
fixed or motorized press load opening
Presses, Laminating
Machines
R.P.P. Rotary Presses Metal or rubber covered as well as
heated combining rolls
Auto Cut Cuts paper & vinyl
Cefla Finishing America Inc., 729 Gallimore Dairy Road, High Point,
NC 27265 Tel: (336) 662-9813 Fax: (336) 662-0318
Cefla Spraybotic 5-axis reciprocating spray system. Thru
Series feed conveyor w/paper overspray collection
system. Up to 3 glue lines, 5 guns
Falcioni Kleenspray Reciprocating spray system. Thru-feed
Conveyor w/paper overspray collection
system. 2 glue lines, up to 4 spray guns
Colonial Saw Co. Inc., 122 Pembroke St., Kingston, MA 02364
Tel: (781) 585-4364 Fax: (781) 585-9375
LK-3, LK-5, LK-10 Over 90 types stock nozzles, plus wide
custom capabilities.
LK3P, LK-5P, LK-10P Allows one-shat metering glue quan-
tities, switchable to continuous flow.
LK-101, LK-102 Allows rapid, metered gluing on complex
Glue Stations profiles incl. coped door pads & window frames.
DPI Advanced Finishing Technologies, 2241 Lake St., Niles, MI 49120
Tel: (269) 684-2259 Fax: (269) 684-2261
Borgonovo Mod 1TS Avail. With single or multiple heads. Work in
1TS+2TL Mod 3798, line with extruders or offline
1TS-CT
Borgonovo Mod 1T80, Single or multiple application heads, angled
3T-96, Mad 4T-96, applicators
2T-96
Borgonovo
Cutter/Shaper
Vigano Ecoprint, FDR Electric heated oil, multiple coil winding
groups, infrared heat
Vigano EC0 75 Infrared lamp heating
Vigano PFM/S Film cut to size by hot wire
Vigano FD 850 Film cut to size by hot blade
Vigano PR 800 Film cut to size by hot blade, motorized
infeed conveyor
DeStafani Type WM Available in multiple configurations, modular
design
DV-Systems, 6031 Harris Technology Blvd. Charlotte NC 28269
Tel: (704) 598-0020 Fax: (704) 598-3950
Duashpol DUP/P Wraps paper, foils, veneer
Duespohl DUP Paper, foils, veneer, vinyl
Duespohl DUP/F Paper, vinyls, veneer
DUP/Kombi Paper, foils, vinyl, veneer
DSS/R, SSW, RSW Continued unwinding/slitting rewinding
USD of roll materials
FKM 400 Continuous application of fleecing onto
sheet/roll materials, various thickness
FKM 700 Same
U 250/30 Vinyls, foils
U 330/30 Vinyls, foils
Dankaert Woodworking Machinery Co., 891 Howell Mill Road N.W.,
Atlanta, GA 30318 Tel: (404) 873-6477 Fax: (404) 874-4813
Simimpianti Hot Press
Simimpianti Membrane
Press
Dieffenbacher, 3100 Cumberland Blvd., Cumberland Center II, Ste. 1470,
Atlanta, GA 30339 Tel: (770) 226-6394 Fax: (770) 226-6397
Spreaders/Roll
Film Laminators
Cold Plate Presses
Hot Plate Presses
Laminating Presses
Hydraulic Presses
Laboratory Presses
Low Pressure
Laminating
Prepresses
Grado gluing system
Alexander Dodds Co., 3000 Walkent Drive N.W., Grand Rapids,
MI 49544 Tel: (616) 784-6000
GP-26F (Dovetail Exact glue amount is pumped
Bluer) onto drawer part
Doucet Machineries Inc., 340 6th St., Daveluyville, PQ, Canada
G0Z 1C0 Tel: (819) 367-2633 Fax: (819) 367-2100
Door Master Series Various configurations
Glue Applicator Conveyorized & automatic
Plate Spreader Stainless steel
Stock Gluer Stainless steel
Clamp Carrier Modular design
Clamp rack Expandable
Dubois Equipment Co. Inc., P.O. Box 749, Jasper, IN 47547
Tel: (812) 482-3644 Fax: (812) 482-3544
Edgetech Inc., 11933 12th Ave. S., Burnsville, MN 55337
Tel: (952) 881-1925 Fax: (952) 881-0374
PF100 Postformer Optional: geoform fixture
PF150 Postformer Optional: geoform fixture, coving opt.
PF200 Postformer Includes infeed & outfeed conveyors
Series
Optional trimmers & slitter saw.
H5400 Hand Spray Optional 2nd gun for additional capacity
Optional stand.
AS400 Series Optional: Side and underwrap guns,
shape sensor to minimize overspray.
PC390 Panel Cleaner Optional: side brushes, double-sided
cleaning.
LPR561 Laminate Segmented rollers available
Pressure Roller
DT420 Drying Tunnel Infrared heaters. Variable speed infeed
and outfeed conveyors
IT530 Index Table Vacuum cups to hold laminate. Hand-
wheel adjustment for various core
sizes and laminate offset dimensions
IT540 Index System Powered drive system & two powered
infeed conveyors for laminate & core
LPR/HT480/481 Infrared heaters. Two roller sections/
one heating section
CM610 Manual Forms backsplashes up to 30" high,
Coving Machine vacuum table holds core while coving.
CM620 Coving Machine PLC controlled, left or right core and
stick feed. Three zone temperature
control (optional)
CM645 Coving Machine Cove heatbar position can be moved to
eliminate need for side shift conveyor
when switching from kitchen to vanity
tops. Powered rive system & PLC control.
European Woodworking Machinery Co., P.O. Box 550, Franklinton,
NC 27525 Tel: (919) 494-5197 Fax: (919) 494-7788
Distributes a full line of Buerkle and Hoefer equipment.
Evans Machinery Inc., 5530 N. 51st Ave., Glendale, AZ 85301
Tel: (623) 934-7294 Fax: (623) 934-7384
0110 Post Former Semi-automatic post former
0138, 0132 Postformer Air assist operation, integrated timer to
ensure error free bends.
0161, 0190 Coving Completely automated controls, auto
Machine cove stick alignment.
0206, 0256 Pinch Available in solid or segmented bottom
Roller roll for bonding countertops.
0366 Index Table Manual operation, adjust for laminate
overhang.
425,342,634,273 Eliminates operators lifting board.
Index Table
4260 Panel Laminator Allows laminated panels to be
machined in minutes. Part of system.
4600, 4602 Laminator Same as above
6100 Postformer Simultaneously postforms 2 sides. Opt.
laminates trimmers and slitting station
for cove bends.
Fletcher Machine Co., 4305 E. U.S. Hwy. 64, Lexington, NC 27292
Tel: (800) 438-1054 Fax: (336) 249-6890
FM-82 For panels, doors. Continuous belt fed
Globe Machine Mfg. Co., P.O. Box 2274, Tacoma, WA 98401
Tel: (253) 383-2584 Fax: (253) 572-9672
Woodworking far furniture parts,
panel sizing, special machinery,
laminating lines.
Globe Membrane High capacity through feed or shuttle
Presses I feed design. Quick-change
long-lasting membrane. Efficient heat
transfer and short press cycle time. Globe
Machine
Globe Pre-presses Down-acting hydraulic rams for up to 2170 psi
pressure. Side-flow and end flow available.
Other Globe Presses Throughfeed or shuttle design. Heat transfer
& short cycle time for hot plate application.
Globe Glue Spreaders Op. glue level control, four-ply attachment,
and Plywood Layup retractable backboard & disk outfeed conveyor.
Globe Glue Mixers Propeller and high shear types.
Graco Inc., P.O. Box 1441, Minneapolis, MN 55440
Tel: (877) 844-7226 Fax: (612) 623-6443
Fast Flo 226-945 Piston pump-stainless steel.
Husky 715 Double diaphragm pump.
218-618
Standard 226-040 Stainless steel piston.
President 206-445 Header manifolds.
Hydrator 226-XXX Bead or spray applied.
Dispensing guns Manual and automatic applications.
Therm-O-Flow 20 Piston pump system.
Therm-O-Flow 200 Piston pump system.
8900 Series Mix or demand 2 part systems.
Proportioner
Hess Group America, P.O. Box 537, Point Pleasant, NJ 08742
Tel: (800) 973-4377 Fax: (732) 295-3753
Mobil Edgebanding Instead of or w/ hotmelt edgebanders
Press
Multipress Any irregular (or regular shaped part
Vertical Frame Clamp
Nora Vertical Frame Precision clamping and squaring.
Centro V Frame Clamp Push button changeover.
Kontra Multi Level Multi-level gluing rack
Rack
Italpresse USA Inc., 26520 Mallard Way, Punta Gorda, FL 33950
Tel: (888) 743-8505 Fax: (941) 639-1663
Italpresse Membrane For high-quality veneered raised panels.
Press "Formatic"
Italpresse Membrane Single & double shuttle trays or
Press "Lockform" carousel system.
Italpresse Cold
Presses "PM/DE"
Italpresse Hot
Presses XL
Italpresse feed Fully automatic, side loading
through press
line "P"
Italpresse feed Fully automatic, end loading
through press
line "Mark C"
Italpresse GL/13-26 More profile than membrane pressing.
Italpresse CM1000 Fully automatic
Italpresse GL1600 Uses standard MDF
Joos USA Inc. 680 Madison Ave. Manala pan NJ 07726 Tel: 732 786-0490
Fax: 732 786-0491
Joos Junior Compact, mobile design. Entry level.
Joos HP-90 Okotherm Elkom platens, water/glycol heating,
Joos HP-150 Okotherm PLC control. Elkom platens, water/glycol
heating, PLC control.
Joos HP-200 Okotherm Elkom platens, water/glycol heating,
PLC control.
Joos DLP Feedthru Automated upstroke PLC control.
Press
Joos DLP OK Automated downstroke PLC control.
Feedthru P.
Joos LAP Lab Press Laboratory press, heating, cooling, etc.
Osama S2R Glue 2 roll glue spreader, auto cleaning.
Spreader
Osama S4R Glue 4 roll glue spreader, auto cleaning.
Spreader
Osama Aquarious Separates water from solids for waste.
Casati Z-650 Stitcher Zig-zag veneer stitcher.
Casati Z-1000 Zig-zag veneer stitcher.
Stitcher
Casati Z-2000 Zig-zag veneer stitcher.
Stitcher
Fisher+Ruckle Sprint Veneer splicer for pre-glued veneers.
F+R Omnimaster Veneer splicing w/glue application.
F+R Omnimaster Plus Veneer splicing w/2 glue applications.
F+R AF Single knife guillotine.
F+R AFD Double knife guillotine.
F+R ASHO Veneer end clipper.
Langzauner LZ 5/2 M Manual veneer saw.
Langzauner LZ 5/2 E Automatic veneer saw.
Langzauner LZ-4-S Automatic veneer saw w/PLC.
ELKOM Replacement heating platens.
3M, Industrial Adhesives & Tapes Div., 3M Center Bldg., 220-5E-06,
St. Paul, MN 55144-1000 Tel: (8001362-3550 Fax: (651) 733-9175
Jet-Weld TCQ Air operated
Polygun II Air operated
Polygun EC Electric
Polygun LTO Electric
Polygun II LT Air operated
Polygun TCQ Electric
EPX Applicator Metering, mixing, dispensing of adhesive
Macoser Woodworking Machinery, P.O. Box 667789, Charlotte,
NC 28266 Tel: (704) 392-0110 Fax: (704) 394-0410
Omec Manual
Omec Automatic
Midwest Group One, 2645 26th Ave. S., Minneapolis, MN 55406
Tel: (612) 721-5347 Fax: (612) 721-1736
Edge Spray System Automatic single and double-sided
Hot Melt Glue Individually heated rolls with precise
Spreader temperature control of adhesive.
Euroform Postformer Static Postforming
MiniForm Postformer Automatic Single or Double-sided.
Standardform
Postformer
Ultraform Postformer Single or double-sided; pre-trim with
PVA spray
system
AC3112/20/25 Inside radius forming
Coving machines
GS 200/300 Glue Feed-through
Spreader
PC 140/160 Panel Dual drive roller sets, slip clutch
Cleaner
GS 300/400 Glue Durable, versatile, easy to change-out rolls
Spreader
RC 400 Roll Coater All roller sets "open" for cleaning
PR 1400/1700 Pinch Both rolls are driven, large diameter rolls
Roller
RP3130/70 Roller Industrial, high volume, 1-piece flow system
Press
CL1400/1400A High efficiency, PVA laminating for
countertops
ORMA-Midwest Presses Manual or automatic
ORMA-Midwest Positive pressure
PM/CA-Air 2514/3014
GRECO Mfg. VP4085, Vacuum
VP4105, VP4125
Mikron Woodworking Machinery, 1558 Hwy. 60, Renfrew, ON K7V 3Z6
Canada Tel: (800) 496-4589 Fax: (613) 432-1270
Elliptical Radius
Rack Air cylinder clamping, easy setup
Newman Machine Co., 507 Jackson St., P.O. Box 5467 Greensboro,
NC 27435 Tel: (336) 273-8261 Fax: (336) 273-6939
Hot, cold,
hydraulic press
Nordson Corp. 11475 Lakefield Drive, Duluth, GA 30097-1511
Tel: (800) 683-2314 Fax: (866) 667-3329
DuraBlue Adhesive Gear pump
Melt.
Foam Melt Applicators Foamed adhesive, grid melter.
E860V Edgebanding Gun Manual adjust.
H-20, H-200, CF-200. Extrusion, spray & spiral patterns
AD31, AD41 guns
PW adiustable profile Extrusion
wrapping slot nozzles
VersaBlue Melters Spur gear pump
AltaBlue TT Melters Spur gear pump
DuraPail Bulk Malter Gear or gerotor pump
Duradrum Bulk Malter Gear pump
PF 60 V Post Forming Extrusion
Slot Gun
PAM Fastening Technology Inc., P.O. Box 669063, Charlotte, NC 28266
Tel: (704) 394-3141
PAM 190, 220 Multi purpose. Variable temp.
PAM 700 Electronic temp. control, air powered.
PAM 700ES, 7005 Hot Melt Spray.
PAM 700K, 700KS Thermoset glue line.
Premelters Inc., 120 Keyes Ct., Sanford, FL 32773
Tel: (407) 330-7762 Fax: (407) 330-6843
MM200 Premelter Melts & pumps hotmelt. Integrates w/
lines or heads. Patented design &
heating system. Handles all materials.
MM500 Premelter See above
MM500HD55 See above. Unloads 55 gal drums
of material
NL-65 Laminator
Quality VAKuum Products Inc., 43 Bradford St., Concord, MA 01742
Tel: (800) 547-5484 Fax: (978) 369-2928
VAK Pumps Low cost, fast, manual veneering
VAK Matic Low cost, automatic veneering
Vacuum Bag Press Industrial & Pro Systems. Any size bag
available up to 12 and BO'.
Vacuum Clamp Unobstructed clamping fast
Vacuum Pumps Rotary vane
Vacuum Pumps, High reliability, low cost
Air-Powered All vacuum applications
RfsProtech, Ogden Group, 1320 Industrial Drive, Matthews,
NC 28105 Tel: (704) 845-2785 Fax: (704) 845-1023
RFS Generators RF generators for any application
RFS SL Series Entry level RF Bluer for growing shops.
RFS EG Series Rugged, dependable, general purpose
edge gluers
RFS SB Series Heavy duty slat bed thru-feed gluers
RFS AS Series 4-way pressure clamp with RF curing
for solid wood edgebanding
RFS CG Series Continuous infeed, step gluing of
panels with hydraulic edge pressure
RFS GS Series Tabletop & conveyorized spreaders
RFS CPP Series Heavy duty curved plywood & PB presses
RFS CP Series Single or inapt-section cold presses
RFS Custom Custom RF presses, clamps, lines
Riebling Machinery, 1511 Rte. 22, Ste. 309, Brewster, NY 10509
Tel: (914) 668-4800 Fax: (845) 350-5848
OTT Presses
SL Woodworking Machinery Inc., 1427-C Boulder Ct., Greensboro,
NC 27409 Tel: (336) 294-9024 Fax: (336) 294-9496
SL DG-Matic
SL GG-Matic Pressurized tank
SL GG-Plus Pressurized tank
Shaw Almex USA Inc., 4045 Five Forks Trickum Road, Ste. B8-303,
Lilburn, GA 30047 Tel: (404) 294-0574 Fax: (404) 294-4407
ALMEX Simplicity in operation and maintenance.
Thermolaminating 100 psi capacity with no
Membrane Press hydraulics. Short cycle time
ALMEX KD Capable of changing w/in seconds from
One Touch Press flat pressing to 3D pressing
ALMEX ThermoFormer Membraneless, with infra-red heat.
Entry-level price.
ALMEX SmartPin Press Model TL7-59-114 SP w/auto pin system.
Stiles Machinery Inc., 3965 44th St. S.E., Grand Rapids, MI 49512
Tel: (616) 698-7500 Fax: (616) 698-9411
Wemhoner Eagle foil magazine, up to 2 auto, driven trays
Wemhoner Basic Variopin syst., auto cut & measure, 2 trays
1000 Plus
Wemhoner Universal Variopin syst., auto cut & measure, 3 trays
2000
Wemhoner Prof. 3000 Variopin syst., auto cut & measure, 5 trays
Friz PUM 120 Roller applicator. Coiled laminates, (i.e.,
paper, PVC, veneer & etc.)
Kuper ACR Crossrunner Crossfeed splicer
Kuper ACR speedstar Crossfeed splicer
Kuper EMZ End trimmer
Tapes & Tools, P.O. Box 1195, High Point, NC 27261
Tel: (336) 884-5371 Fax: (336) 841-6493
Hand glue Interchangeable rollers for various
spreader adhesive types
James L. Taylor Mfg. Co., 108 Parker Ave., Poughkeepsie, NY 12601
Tel: (800) 952-1320 or (845) 452-3780 Fax: (845) 452-0764
Clamp carrier Modular design, manual, automatic;
pneumatic, hydraulic.
Auto Clamp Carrier Pneumatic, hydraulic, smart clamp soft-
ware.
Dual Auto. Carrier Pneumatic, hydraulic, smart clamp soft-
ware.
Glue applicator Conveyorized; automatic.
Mix-Mizer #12, Automatic; continuous.
#30 & #140
Automatic Pumps Automatic.
Optisizer Automatic.
Therm O Web Inc., 770 Glenn Ave., Wheeling, IL 60090
Tel: (800) 323-0799
Therm O Web Bond is instant & ready for immediate
Laminating Systems; fabrication. No clean-up required.
S & LS Series Minimum labor required.
available in 50"
and 62", wide
Unique Machine & Tool Co., 4232 East Magnolia, Phoenix, AZ 85034
Tel: (602) 470-1911 Fax: (602) 470-1916
Glue dispenser Portable roll on glue dispenser.
Vacuum Pressing Systems, 553 River Road, Brunswick, ME 04011
Tel: (800) 382-4109 or (207) 725-0935 Fax: (207) 725-0932
Vacuum Press Vacuum bag and frame type veneer
press for flat and curved panels. The
flexible vacuum bladder allows the
press to conform to almost any shape.
Veneer Systems Inc., 100 Rock River Drive, Ste. 104, Buffalo,
NY 14207 Tel: 1800) 825-0840 Fax: 1877) 871-1733
Profile Press Double membrane available to press
both sides simultaneously
Membrane Presses Power source air only, low cost
COMAC profile COMAC offers slitting,. roller
wrapping equipment lamination, roller coating and
profile wrapping equipment.
Voorwood Co., 2350 Barney St., Anderson, CA 96007
Tel: (530) 365-3311 Fax: (530) 365-3315
L110 Entry size, shapes and applies hot
transfer foil to profile edge
L117 High production, shapes, sands and
applies hot transfer foil to profile edges.
Handles complicated profiles.
L108 High production, shapes, sands and
applies hot transfer foil to profile edges.
L217 double-sided Handles complicated profiles.
L4X Patented quick-change profile wrapping
system.
L8X Patented quick-change profile wrapping
system.
L-85 Econ. unit for precut & embossed parts
L-86 Dual application rollers, staged oven
for long life, precleaner.
L-73 Contour Foiler Applies dry transfer foil to contoured edges
of CNC shaped MDF parts; does inside and
outside radii-plus corner radius.
P78 Groove Foiler Scores, shapes, sands and foils a single
groove/plough to the desired profile
all in one pass. Can be used for solid wood.
L79 End Finisher Sizes/cuts to length, sands both ends and
process. applies hot transfer foil in one pass
Ideal for finishing the ends of trim
mouldings, shutter parts, etc.
HML-12 Profile Patented quick change cartridge for under
Wrapper 10 minute profile change.
PRODUCT TYPE CODE:
Gluing Equipment
1. Applicators Conveyorized
2. Clamp Carriers
3. Dovetail & Dowel Gluers
4. Edge Gluers
5. Electronic Gluing Equip.
6. Guns
7. Hot Melt Applicators
8. Jointers
9. Mixers
10. Pots
11. Pumps & Tanks
12. Scarf Gluers
13. Spreaders/Portable
14. Spreaders/Roll
15. Other
Laminating Mach. Presses
16. Film Laminators
17. Postforming Machines
18. Roll Laminating Systems
19. Air
20. Air Bag
21. Air Hose
22. Cold Plate
23. Embossing
24. Hot Plate
25. Hydraulic
26. Laboratory
27. Laminating
28. Low Pressure Laminating
29. Molding/Membrane
30. Prepresses
31. Rotary
32. Shuttle
33. Other
COPYRIGHT 2009 Vance Publishing Corp.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2009 Gale, Cengage Learning. All rights reserved.
|
|
Printer friendly
Cite/link
Email
Feedback
Reader Opinion