Get smoother bumps in micro-bore tubing.New, more intuitive software Application programs that have a friendly interface and work like users would expect. Menu functions are available in a logical order that one finds natural. The most common functions are presented in one menu or are located at the top of the menu list rather than being buried in rigid on Conair's MedLine puller allows it to switch from straight to bump tubing (or vice versa VICE VERSA. On the contrary; on opposite sides. ) with a push of a button. ID dimension during straight tube production is formed by internal air pressure in the die, controlled by a new 3-axis laser OD Gauge from Zumbach Electronics, Mt. Kisco, N.Y. To form bump tubing, the Zumbach control is disabled while Conair's puller, which has servo drives A servo drive is a special electric amplifier used to power electric servo motors. It monitors feedback signals from the motor and continually adjusts for deviation from expected behavior. on upper and lower belts and twin planetary gear reducers, automatically decelerates to form the bump, then accelerates again. Conair demonstrated the puller at the recent MD&M East show in N.Y.C., where it made TPU TPU - Text Processing Utility tube with 0.06- to 0.07-in. OD and 0.006-in wall thickness. Conair: (412) 312-6000/www.conair.com * Zumbach: (914) 241-7080/www.zumbach.com [ILLUSTRATION OMITTED] |
|
||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion