Get Your Copy of the New Handbook of Polymers in Cementitious Materials.DUBLIN, Ireland -- Research and Markets (http://www.researchandmarkets.com/reports/c27863) has announced the addition of Polymers in Cementitious ce·men·ti·tious adj. Of or relating to a chemical precipitate, especially of carbonates, having the characteristics of cement. [From Latin caement Materials to their offering. The construction industry increasingly requires products that are cost effective and easy to use, to enable fast track application whilst achieving a high physical performance. Incorporating a polymer in a cementitious mix brings key advantages, particularly in terms of workability, abrasion abrasion /abra·sion/ (ah-bra´zhun) 1. a rubbing or scraping off through unusual or abnormal action; see also planing. 2. a rubbed or scraped area on skin or mucous membrane. and impact resistance, with the resulting physical and chemical properties dependent upon the nature of the polymer material and the quantity used in relation to the cement cement, binding material used in construction and engineering, often called hydraulic cement, typically made by heating a mixture of limestone and clay until it almost fuses and then grinding it to a fine powder. phase. This Handbook is intended to provide an insight into the uses of polymers within the construction industry. It describes the conception of polymer-modified cementitious materials through to the array of polymer-based or polymer-modified material utilised in modern day construction. It not only covers the use of polymers in direct combination with cement but polymer concrete Polymer Concrete Polymer concrete is part of group of concretes that use polymers to supplement or replace cement as a binder. The types include polymer-impregnated concrete, polymer concrete, and polymer-portland-cement concrete. , impregnation impregnation /im·preg·na·tion/ (im?preg-na´shun) 1. fertilization. 2. saturation (1). impregnation 1. the act of fertilizing or rendering pregnant. 2. saturation. of polymers into the concrete substrate The base layer of a structure such as a chip, multichip module (MCM), printed circuit board or disk platter. Silicon is the most widely used substrate for chips. Fiberglass (FR4) is mostly used for printed circuit boards, and ceramic is used for MCMs. and other polymer-based products, (i.e., coatings and adhesives). Both natural and synthetic polymers Synthetic polymers are often referred to as "plastics", such as the well-known polyethylene and nylon. However, most of them can be classified in at least three main categories: thermoplastics, thermosets and elastomers. are reviewed. This book is aimed at all those who are working with cement, and also at anyone who needs more information about this most versatile of materials, offering insight into:
- the common polymers used in cementitious materials
- polymer concrete
- polymer Portland cement concrete
- reinforcement using synthetic fibres
- adhesives and coatings
Topics covered include:
- History of Cementitious and Polymer Technology and their
Unison
- Common Polymers used in the Formation of Concrete and
Cementitious Products
- Polymer Concrete
- Polymer Portland Cement Concrete
- The Use of Synthetic Fibres to Reinforce Cementitious
and Resin-Based Materials
- Adhesives and Coatings
- Summary of the Applications and Benefits of Utilising
Polymers n Construction
For more information visit http://www.researchandmarkets.com/reports/c27863 |
|
Printer friendly
Cite/link
Email
Feedback
Reader Opinion