GM Multi-Spindle Automatic Turning Machines. (GM Product Line).The GM series (six and eight spindle spindle: see spinning. A rotating shaft in a disk drive. In a fixed disk, the platters are attached to the spindle. In a removable disk, the spindle remains in the drive. Laptops use spindle designations to indicate the number of built-in drives. automatic turning machines) has been designed to achieve highest precision. Up to 4 CNC (Computerized Numerical Control) See numerical control. CNC - Collaborative Networked Communication cross slides can be utilized for internal and external contour contour or contour line, line on a topographic map connecting points of equal elevation above or below mean sea level. It is thus a kind of isopleth, or line of equal quantity. turning as well as thread chasing. Technical Data GM 16-6 GM 20-6 GM 35-6 Spindle pitch circle diameter max. in. 0.63 0.79 1.4 Number of spindles 6 6 6 Spindle pitch circle diameter in. 6.5 7.1 11 Compound slide traverse longitudinal in. 1.8 2 2.8 Side slide traverse in. 1.1 1.7 2.4 Longitudinal slide travese in. 2.5 3.4 4.7 Max. Speed rpm 9,000 5,000 4,000 Main drive hp 14.7 14.7 24.1 Rapid traverle time S 0.4 0.7 1 Technical Data GM 42-6 GM 35-8 GM 70 CNC Spindle pitch circle diameter max. 1.7 1.4 2.8 Number of spindles 6 8 3 + 1 Spindle pitch circle diameter 11 13.2 12.6 Compound slide traverse longitudinal 2.8 2.8 Z1 - Z2 = 22.2 Side slide traverse 2.4 20 X1 - X2 = 6.1 Longitudinal slide travese 47 3.9 - Max. Speed 2,700 4,000 3,000 Main drive 29.5 29.5 18.1/12.1 Rapid traverle time 1.2 1 2.5 Technical Data GMF 175 CNC Spindle pitch circle diameter max. 6.9 (*) Number of spindles 3 + 1 Spindle pitch circle diameter 12.6 Compound slide traverse longitudinal Z1 - Z2 = 22.2 Side slide traverse X1 - X2 = 6.1 Longitudinal slide travese - Max. Speed 3,000 Main drive 18.1/12.1 Rapid traverle time 2.5 (*)Chuck |
|
||||||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion