Float blade reminder.Operators, do not use the dozer's quick drop feature when the blade is over a ditch ditch (ditching), n the undesirable loss of tooth substance in the region of a restoration margin (usually gingival). or edge of a sand berm berm: see beach. . That's not spelled out in the CAUTION you'll find on Page 2-31 of TM 5-2410-237-10. In the desert, some have found out the hard way that the quick-drop lets the blade fall quickly when you put the blade control lever lever, simple machine consisting of a bar supported at some stationary point along its length and used to overcome resistance at a second point by application of force at a third point. The stationary point of a lever is known as its fulcrum. in the F (float) position. Problem is, there's no built-in stop. The blade drops until it hits the ground, or the end of the cylinder cylinder, in mathematics, surface generated by a line moving parallel to a given fixed line and continually intersecting a given fixed curve called the directrix; each line of the family of lines forming the cylinder is called a ruling, or generator. rod hits the end of the cylinder and rips the nut off the rod. Then the blade's lift cylinder rods are yanked out of the cylinder. Your construction operations come to a screeching halt! Never let the blade drop 18 inches or more below the bottom of the vehicle's tracks. Use the F (float) position with care, or shift to L to lower the blade under power. |
|
|||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion