Feed edge trim without speed control.
Feed rollers See Ground sea on a new edge-trim feeding system from Conair in Pittsburgh have intermeshing grooves Grooves is an American electronic music magazine founded in 1999 by editor Sean Portnoy, initially concentrating on the then-burgeoning IDM music genre and expanding to its more experimental, abstract offshoots, such as microsound, microhouse and glitch, eventually that eliminate the need for a dancer roll or electronic speed control to feed a machine-side granulator. Conair's new rollers intermesh so that the peak of a groove on one roller roller, common name for brightly colored Old World birds noted for performing somersaults in flight. They include the rollers proper (subfamily Coraciinae) and ground rollers (subfamily Brachypteraciinae fits into the trough Trough
The stage of the economy's business cycle that marks the end of a period of declining business activity and the transition to expansion. of a groove on the other. The two rollers don't actually touch, however, which means that if the edge-trim feed rate is ever slower than the granulator feed rolls, the film just slips between the rollers but doesn't break. This saves the cost of an electronic control loop to slave the speed of the granulator feed rollers to the extruder output rate. Tel: (412) 312-6000 * PTDirect: 276DT
COPYRIGHT 2004 Gardner Publications, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2004, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.
|
Printer friendly
Cite/link
Email
Feedback
Reader Opinion