Extrusion systems.

ADDEX INC., USA

Complete blown film lines, dies, air rings, automatic gauge control, IBC systems, oscillating hauloffs, winders,feedscrews and extruders. Patented Internal Gauge Control (IGC) uses air from the IBC to automatically correct film-thickness variations. Patented Compact Gauge Band Randomizer (GBR) oscillating hauloff is suitable for retrofits with low ceiling height. Patented REDi (regular division) die technology yields 20-25% lower film thickness variation. Surface/Center assist winder with reverse winding capability can wind to 58-in. diam. rolls in its stacked/ space saving setup.

AKRON MILACRON

See ExtrusionTek Milacron.

AL-BE INDUSTRIES, INC.

Standard line of single-screw extruders (3/4- to 2 1/2-in. diam.) and custom-designed units up to 8 in. All have bimetallic-lined barrels with up to 32:1 L/D. High-capacity thrust housings provide long bearing life. Auxiliary equipment includes vacuum sizers and cooling tanks, hauloffs, cutoff saws, coilers, and dies for pipe, tubing, pelletizing, and custom profiles.

ALPHA MARATHON TECHNOLOGIES, INC.

Offers direct extrusion in-line air bubble forming machine for making bubble wrap from film widths of 48, 72, and 96 in. available with line speeds up to 200 fpm; and a laminating machine with the versatility to produce laminations of four materials simultaneously: foam, poly, coated paper, coated aluminum foal.

Single-screw extruders from 1- to 6-in. diam. Features include air or water cooling, triple reduction gear reducers, bemetallic barrels, grooved or smooth feed sections.

Monolayer and coextrusion spiral dies up to five layers feature "Flow Mixing Channels" for greater thermal dispersion, lower residence times, and minimal gauge variations. Stationary, rotating or oscillating systems available.

Low-pressure modular stack die (2000-3000 psi) for coextrusion applications of five-plus layers features dual proportional heart design and diamond-type mixer. Downstream equipment includes top nips, secondary-nip assemblies, surface winders and horizontal film oscillators (HFO).

Top-nip assembly options include collapsing frames and gusset assemblies. Surface winders range from manual to fully automated models with line speeds to 500 ft/min.

AMERICAN EXTRUSION SERVICES INC.

Offers single-screw extruders for pipe/profile, sheet and cast film, tandem foam lines, and dual-diameter reclain extruders.

AMERICAN JET STREAM, INC.

From Plastimac of Italy complete blown film extrusion systems for HDPE, LLDPE, and LDPE.

AMERICAN KUHNE CORP.

Single-screw extruders from 0.75 to 10 in. Complete extrusion lines for sheet, tubing and profile. Sheet lines produce flat films and sheet of PE, PVC, ABS, acrylic, TPU, and filled materials.

Offers Steward barrier screws for high-quality, high-output performance for all resins. Screw sizes from 3/4 to 12 in. in any L/D for vente and nonvented applications.

AMERICAN MAPLAN CORP.

Twin-screw extrusion systems for rigid PVC pipe, siding and profiles including three conical and four parallel twin-screw extruders: Con 40, BEX 54 and DSK 62 conicals; and TS 92, TS 110, TS 135 and BEX 168 parallels with 26:1 L/D. Single-screw extrusion systems for polyolefins with extruders from 45 to 220 mm with 30:1 L/D. Extrusiion output rates from 100 to 5000 lb/hr. Natural fiber composite extrusion systems available with all extruder types. Tooling for PVC and polyolefin pipe from 1/2 to 63 in. Also complete tooling for siding, profile, fense, deck and natural fiber composites. Complete downstream systems available for all product lines. Also complete new or rebuilt barrel and screw program.

ASHLAND-TECH INC.

Complete extrusion lines for corrugated pipe with patented corrugators and dual-wall tooling systems; blown film systems with in-line bagmaking and converting equipment coupled with automatic packaging; and scrap reclaim and pelletizing systems. Custom-designed tooling and extruders from 3/4- to 18-in. diam. with patented screw designs.

B&P PROCESS EQUIPMENT & SYSTEMS

See Compounding/Mixing Systems.

BATTENFELD GLOUCESTER ENGINEERING

Complete extrusion systems for monolayer and multilayer blown film, cast film, rigid sheet, and foam sheet. Also extrusion coating, control systems, and in- or out-of-line bagmaking systems. Reclaim systems and granulators, downstream equipment, winders, and gravimetrics.

BAUSANO GROUP SPA

Supplies parallel twin-screw extruders and complete systems for extruding "Polywood" sheet or profiles or compounders of themoplastics mixed with fillers such as sawdust, rice hulls and paper.

BERLYN EXTRUDERS INC.

Single-screw extruders from 3/4- to 15-in. diam. and all L/D ratios; filters and screen changers, including slide-plate, continuous and automatic types; strand dies, water baths, air strippers and pelletizers, and underwater pelletizing systems to 6000 lb/hr; melt gear pumps; flat sheet lines to 108 in. width and all thicknessess. Profile lines for pipe, tubing and complex structural sections.

Single-screw recycling extrusion systems consist of granulators, vertical screw feeders, 50:1 barrels, dual-venting systems, slide-plate screen changers and/or continuous filters, and strand and underwater pelletizers. Production rates from 100 to 10,000 lb/hr. PLC-controlled systems available.

BERSTORFF

Corotating, twin-screw compounding extruders and pelletizing systems; twin-screw compounding with direct in-line sheeting of filled and reinforced plastics; single- and twin-screw extruder for devolatilization and specialty applicatins; and single-screw profile extrusion systems from commingled reclaim. (See Compounding/Mixing Systems.)

BLACK CLAWSON CONVERTING MACHINERY

Complete processing lines for flat or embossed cast film, stretch wrap, extrusion coating and lamination; oriented film, and oriented-tape and fiber. Single-screw extruders from 2.5- to 12-in. diam. with standard L/Ds of 24:1 and 30:1. Accessories include film and coating diea, primer coaters and dryers, film winders, unwinds, slitter/rewinders, and coextrusiion systems for cast film and extrusion coating. All systems available with microprocessor controls. Supervisory control system available.

Pre-engineered products include QFP extrusion coating and laminating line, and universal cast film lines. Suited for quick installation and start-up.

Standard and custom-built, single-screw compounding/pelletizing extruder systems in melt-feed, cold-feed, and batch-feed designs with diam. to 24 in. and outputs to over 120,000 lb/hr. (See Compounding/ Mixing Systems.)

BOSTON MATTHEWS INC.

Extruders, downstream equipment and complete lines for tubing and profile. Products include single-screw extruders and coextruders (0.75 to 6 in.), caterpillar takeoffs (rugged direct-drive machines such as the Farris Puller), automatic traveling saws including servo-driven models, rotary cutters, vacuum calibration tanks, dry calibration units, spray baths and coilers (single-and twin-shaft).

C.W. BRABENDER INSTRUMENTS INC.

Laboratory single-screw extruders come in 3/4- and 1 1/4-in. barrel diam. with L/Ds from 10:1 to 30:1. Extruders easily attach to company's Plasti-Corder torque rheometer drive or Prep Center drive and can measure processing conditions for various polymers.

The 3/4-in. Independent table-top extruder is a compact, self-contained system with a 1-hp motor and worm gear reducer.

Twin-screw extruders available in designs, which include the 42-mm parallel counterrotating high-shear miniature compounding design with output rates to 3.6 kg/ hr; conical model in counter or corotating 42 mm, 17:1 L/D ratio for extrusion rates to 20 kg/hr; and 25-mm segmented twin-screw extruder with L/D ratios from 16:1 to 48:1.

Wide selection of screw, dies, an take-off equipment available.

BRAMPTON ENGINEERING INC.

Single-screw extruders for blown film, pipe, profile, sheet, and wire/ cable with 1- to 8-in. diam. and L/Ds to 40:1.

Complete blown film lines include all equipment such as components for turnkey installations. Products include extruders, dies of all sizes and up to 10 layers, air rings, bubble cages, stationary or oscillating hauloffs, winders (center turret and surface), fully computerized line controls, and gravimetric blenders, feed systems, and internal bubble cooling systems (IBCs).

BREYER GMBH MASCHINENFABRIK

Offers single- and twin-screw extrusion lines for sheet, film, pipe, an tube.

BRUCKNER INC.

Offers biax film stretching lines for PP, PET, nylon, PS, and PVC. Also offers specialty LISIM simultaneous stretching systems for PET and PP. Formtec business unit make twin-screw extruders for undried APET.

BUSS AMERICA INC.

See Coperion Corp.

CENTURY EXTRUDERS DIV. OF CENTURY, INC.

CX series corotating intermeshing twin-screw extruders in sizes 30 to 133 mm for compounding, mixing, filling, and reinforcing polymers.

Also represents a line of multi-screw "ring extrudes" from 3+ Extruder GmbH in Germany. These consist of a circle of 12 intermeshing screws that corotate around a static core. They provide low-pressure dispersive and distributive mixing. Resin on the outside of the ring of screws travels in one circumferential direction, while resin on the inside of the ring travels in the other direction. (See Compounding/Mixing Systems.)

CENTURY SPECIALTIES DIV. OF CENTURY, INC.

Manufactures precision twin-screw replacement parts including screw elements, shafts, and barrels from 30 to 300 mm. Replacement parts completely interchangeable with OEM parts.

CITSCO INC.

Offers new series of small extrudes for laboratory use and production of medical tubing from Gimac of Italy. Machines come in 12 to 44 mm diam. Screws and barrels are nitrided. Barrels can have water-cooled feed zones. The 12-mm model has a 24:1 L/D and max. screw speed of 100 rpm as standard.

CONAIR

Downstream equipment for pipe, tubing and profiles, including complete extrusion systems with product tooling, sizing, cooling, cutoff and product handling equipment.

Indiviadual inline components include the high-intensity spray cooling tank efficient at removing heat from pipe and heavy profiles, MT and MTP vacuum sizing tanks for precise sizing of tubing and profile, MSVP calibration table, MCB spray and flood cooling tanks, v-belt and cleated pullers, and rotary-knife cutters and traveling saws for precision cut-off of large profiles and wood composites. Specialty equipment includes dump tables, takeaway conveyors, straw wrappers, flex machines and coilers.

CONVAC SYSTEMS

The ConVac System is a novel modified corrugating line that continuously extrudes discrete hollow parts and is retrofittable on Cullom's corrugators.

COPERION CORP.

Engineered systems for polymer processing bases on Waeschle bulk-handling knowledge, Werner & Pfleiderer, and Buss process designs from engineering studies to full turnkey facilities.

Offer reciprocating single-screw extruders for compounding thermoplastics and thermosets.

CORELCO

Makes downstream tooling for netting and corrugated pipe, including double-wall pipe up to 10-in. in diam.

CORMA INC.

Corrugated pipe or tubing systems include 12 standard models for 1-mm I.D. to 3000-mm O.D. pipe. Systems produce single-wall, double-wall, triple-wall and ribbed pipe for electrical conduilt, automotive, medical, drainage, sewers and culverts, as well as after coolers, perforators, slitter, cut-off and high-speed winders.

Offers extruders with corrugating lines. Also in-line cuff systems for single-wall, double-wall, triple-wall and rib pipe.

COSTARELLI USA INC.

Mono-layer and extrusion lines for pipe, including a complete recycling system to convert 100% post-consumer recycled plalstic into 60-in. diam. drainage pipe.

DAVIS-STANDARD CORP.

Customized extruders, feed screws, drives and controls for wire and cable, pipe, profile, medical tubing, sheet, blown and cast film, blow molding, elastomers, compounding, extrusion coating, reclaim/ recycle, and fiber. Also systems for high-voltage wire and cable, melt-blown nonwovens, and high-throughput BOPP, OPS, and PET film.

Complete systems include single-screw extruders to 12-in. diam. including grooved-barrel, vented-barrel, tiltable, and tandem machines and vertical extruders to 3 1/2-in. diam. Downstream equipment for blown and cast film, sheet, laminations, pipe, profile, fibers, and compounding. Underwater pelletizing lines. Feedblocks, dies and other coextrusion custom-designed equipment for sheet and blown film.

Custom Hartig single-screw extruders from 3/4- to 15-in. diam. in L/Ds of 24:1 to 48:1, air- or water-cooled versions, vented or nonvented. Precision laboratory and midsized Killion production equipment available from small bench model extruders to complete systems with vacuum tanks, water troughs, pullers, winders and Versa cutters.

Reprocessing extruders in single- and dual-diam. configurations for handling materials from bulk densities as low as 0.5 lb/[ft.sup.3] to hot melts.

Multilayer barrier film and sheet coextrusion systems and custom-designed recycling extruders to handle low-bulk-density scrap. Blown film dies, rotators, and winders range from one to five layers in sizes up to 86-in. diam.

For rigid PVC profiles, conical and parallel twin-screw Gemini machines are reportedly rugged and easy to operate and maintain.

Flexible PVC medical tubing systems provide outputs to 400 fpm; ultra-precise I.D./O.D. ovality; screw designs for high product clarity; continuous ultra-low-tension coiling; and 1-, 1 1/4- and 1 1/2-in. floor-model extruders.

Epic III controls incorporate dual-thermocouple control and responsive closed-loop line control. Graphical interface features pictorial control screens, trending, complete line documentation, data acquisition, SPC, and networking capabilities.

Specialized technical services, modernization of machinery and control, and rebuilding of all makes of extruders with custom packages to improve output and performance. (See Compounding/Mixing Systems.)

DAVIS-STANDARD FILM & COATING SYSTEMS

High-capacity extrusion lines for blown film, cast film, and extrusion coating in mono and coextrusion systems with custom designed dies, screws, and line equipment for a wide range of products. Extrusion coating and laminating lines produce flexible packaging, aseptic packaging, liquid packaging, tube laminates, and industrial products. Cast film lines produce coextruded stretch wrap, multilayer packaging films, high-barrier structurees to nine layers, and embossed film. Blown film systems produce simple monolayer film for bags, high-speed stretch wrap, multilayer barrier packaging and PVDC film. CMR and EPIC control systems for single or multiple line control on new systems or as retrofits.

DAVIS-STANDARD KILLION SYSTEMS

Single-screw extruders from 0.5- to 3-in. diam. and L/Ds to 40:1. Downstream equipment includes tubing and profile cutters formerly made by Versa Machinery. Complete extrusion systems for tubing, wire coating, blown film, pipe, sheet, profiles, filament, coextrusion, pelletizing, and lab setups.

Builds custom extrusion equipment with emphasis on coextrusion and coating and laminating systems. Wide range of extrusion-related services, including process laboratory facilities and training programs. (See Compounding/Mixing Systems.)

DELTAPLAST MACHINERY LTD.

Delta single-screw extruders from 1- to 6-in. diam. are liquid- or air-cooled and have Deltatherm heating/cooling systems, heat-failure alarm systems, in-stream hopper metal traps, open-frame construction, and unitization.

New parallel twin-screw extruders for PVC in 75-, 94- and 114-mm diam. and 26:1 or 33:1 L/D.

Caster-mounted and column-mounted coextruders, as well as dies, profile sizers, cooling tanks, and custom-engineered screws. Also rebuilds equipment.

DIAMOND AMERICA CORP. AKRON QUALITY SCREWS

Line includes TL-150 and TL-290 single-screw extruders. New dual-purpose TL-150/30 lab line has two interchangeable barrels and screws: 1.5-in. diam. smooth feed and 30-mm diam. grooved feed.

DROSSBACH N.A. INC.

Extruders and complete extrusion lines, specializing in corrugating equipment for pipe and tubing.

DYNISCO EXTRUSION & POLYMER PROCESSING

Normag positive-displacement gear pump in outputs from 0.06 to 41,000 lb/hr and viscosities to 20 million cp regulates the amount of material to the die, lowering melt temperatures for faster cooling and smoother running extrusion lines. Eliminates pressure changes at the die, producting increased output, less scrap and higher product quality.

Extek EM manual screen changer in sizes 1-4.5 in. features multipositions handle to avoid interferences and allow better operator access. Extek EH hydraulic screen changer in sizes 2.5-10 in. allows screen changes on-the-fly at full extruder output, minimizing downtime and labor.

ENTEK EXTRUDERS

E-Max corotating intermeshing twin-screw extruder processing systems for plastics, rubber, direct extrusion, food and powder coating industries. Extruders are completely integrated with gear box lubrication, water recirculation and vacuum systems built into the base of the units. Units have dependable, maintenance friendly a-c motors, on-board programmable logic controllers and operator controls with real time trending.

Conversions of older counterrotating twin-screw extruders into corotaing extruders offered. Will also take older lower throughput twin-screw extruders and replace the processing section with increased screw diameters and barrel boxes using the same gear system to increase throughput up to 50%.

Company has recently introduced a patent-pending strand dies head assembly for twin-screw extruders that has a quick-opening design that allows the screws to be pulled right through the die assembly.

Complete turnkey systems from design to installation provided.

THE ENTWISTLE CO.

Lines include vertical and Verta-turret extruders for coextrusion and stripping; complete extrusion systems to 6-in. diam. for insulating and jacketing wire and cable with thermoplastic, thermoset, and fluoropolymer compounds, and for foam/ coax extrusion; fiber-optic extrusion coating lines; single and multilayer sheet lines with roll widths to 42 in.; spiral winders for hose reinforcement; automatic crossover wire dual take-ups and coilers; patented dual flyer pay-offs; shaftless pay-offs and take-ups to capacities of 30,000 lb; dual-drum, belt wrap, or open types of capstans; caterpillars for heavy-duty applications; insulation patching presses; and systems for rereeling, recoiling, length measurement, and spark testing.

Supplies complete line layouts, individual machine layouts and utility connections, complete interconnection drawings with wires numbered, sized, and all terminal connections numbered.

ESI-EXTRUSION SERVICES, INC.

Designs and manufactures automated downstream extrusion equipment and systems. Product line includes servo- and air-actuated fly-knife cutters, fixed and travelling cut-off saws, Accupunch inline fabrication units, smooth and cleated belt pullers, conveyors and blow-off tables, vacuum sizing tanks, hot-water annealing and vacuum calibration tanks, spray and flood-cooling tanks (including conveyorized), wind-ups, letoffs, and custom-built equipment.

Company supplies complete engineered line system services including all extrusion equipment, overall line engineering and layout, on-site setup supervision, and equipment run-in, startup and training. Also complete design and manufacturing of profile extrusion die and calibration sizing tooling with on-site run-in service.

EXTRUSIONTEK MILACRON

Conical twin-screw extruders process heat-sensitive materials such as flexible or rigid PVC. Five basic models: CMT-35, CM-55, CM-65, CM-80, and CM-92.

Downstream equipment includes vacuum calibration tables, pullers, saws, collection tables, spray baths, dry-face cutters, and pneumatic cooling systems. Output rates of rigid PVC from 10 to 2500 lb/hr. Complete systems for pipe, siding, sheet, window profile, and pellets. Replacement screws and barrels for parallel and conical twin-screws.

Single-screw extruders in 1 1/2- to 8-in. diam. with standard L/Ds of 25:1 and 30:1 and air or water barrel cooling. Heavy-duty components and versatile drives in right-hand, left-hand, or tuck-under configurations. Can be configured to accept competitive screw shanks. Downstream equipment for sheet, compounding, film, pipe and profile.

Also single-screw extruders designed to process a variety of materials including RPVC and fluoropolymers. M-PAK series of small-diam. machines can be supplied in configurations from pedestal to bench-mounted models.

Sheet extrusiion systems utilize twin- or single-screw extruders and three-roll cooling/polishing stacks. Vertical, horizontal or reconfigurable roll orientation. Silent-chain, open-gear or individually driven roll-drive assemblies. Pneumatic and hydraulic nip actuation.

Process-control options include discrete instruments, company's EXc microprocessor systems, or fully integrated line control with color touchscreen, SQC charting, and supervisory-level process analysis.

FARREL CORP.

Custom-designed, heavy-duty single-screw extruders for homogenizing and extruding in strip, strand or pelletized form. Specializes in large machines up to 26-in. diam. with production rates as high as 60,000 lb/hr. Hot-melt extruders, cold-feed extruders, and machines accepting discharge from batch or continuous mixers. Also retrofits for LDPE extruders with vents for devolatilization.

FLENDER CORP.

Offers A-Line single-screw extruders from 2.5 to 10 in. diam. with high torque and low noise. Also offers Motox-N drive motors.

FUTURE DESIGN INC.

Saturn dual-lips air rings come complete with interchangeable lipsets to suit dies from 1/2 up to 100 in. Supplies new bubble glide guiding system and new Escort haul-off system along with low-pressure spiral dies, stationary and oscillating die stands, screen changers, bubble enclosuresm bubble width controls, extruders, feed screws, ait-bearing and Teflon collapsing frames, ktop-nip assemblies, and surface winders. North American agent for Martignoni Elettrotecnica srl corona dual-side treaters.

Engineering, planning, servicing, and rebuilding of equipment as well as several Saturn programs: Saturn upgrade program and Saturn Air Ring Exchange program.

GHIOLDI SRL

Produces mono- and multilayer blown film lines for up to seven layers, as well as mono- and multilayer cast film and extrusion coating lines. Also offers compact blown-film lines for tubular PE film and bubble wrap.

G.F. GOODMAN & SON, INC.

Downsteam machinery for pipe, tubing, and profile extrusions from less than 0.010 to 8 in. O.D. Included are vacuum-sizing, spray-quench and cooling tanks. Range of pinch-roll and caterpillar pullers with Synchro-Pull double-sided timing belt drive equipped with a-c and d-c flux vector, or servo motor and drive system. On-demand rotary knife cutters with choice of electromagnetic, pneumatic, heavy-duty hydraulic, Vac-U-Torq vacuum clutch/brake or servo system and flywheel cutters for cutting extrusions both on- and off-line. Traveling saws for on-line cutting of rigid extrusions. Cutters and pullers available in combination of custom engineered systems for specific requirements. Discharge conveyors available with or without air ejection to sort cut lengths. Full line of Bondabelt replacement caterpillar belts for any make or model puller.

HARREL, INC.

Small to medium-size single-screw extruders (to 4 1/2 in.) feature rugged construction, digital drives (accurate to 0.001%), and Digipanel microprocessor controls. Deartruders are a combination of extruder, high-precision gear pump, digital drive, and Digipanel microprocessor controller, which coordinates extruder and gear pump operation.

Specializes in complete prepackaged extrusion systems for tubing, profiles, and sheet. Patented Tubetrol system controls both O.D. and I.D. of tubing or pipe of any size or style, whether single or multilumen, straight tubing or bump tubing. Sheetrol systems control both machine direction and cross machine profile of extruded sheet.

Downstream accessories include Roller-puller no-clutch (servo driven) cutters and a line of classifying conveyors.

HOSOKAWA ALPINE AMERICAN

Complete blown film extrusion systems and components include grooved feed extruders from 35 mm to 120 mm with outputs rates from 160 to 1700 lb/hr; and monolayer and coextrusion systems to eight layers. Can process all PE resind including plastomers, EVOH, EVA and nylons.

Offers two auto profile systems: the heated die AutoTherm system and the segmented cooling ring. Both systems offer excellent gauge control for production of flat wrinkle-free film.

MDO equipment allows for the production of film with excellent physical, optical and barrier properties to maximize profitability.

Turnkey installations offered and all related blown film extrusion and auxiliary equipment.

HPM DIV. TAYLOR'S INDUSTRIAL SERVICES LLC 

Complete single-screw extrusion systems for sheet, pipe, profiles, tubing, compounding, recycle, and scrap reclaim. Four styles of extruders, four style of sheet lines, and a variety of auxiliary components, including patented Triplewave screw, which increases production. High-torque, high-speed compounding lines in 2.5- to 10-in. sizes and lengths to 50:1.

Prodex profile extruder can be supplied for all profile sizes with or without a downstream system. Turkey profile lines include wet vacuum, dry vacuum, or air calibration, plus material handling.

Custom equipment for demanding applications includes very wide sheet, very thick sheet, coextruded sheet to nine layers, and high-throughput and high-speed sheet extrusion.

Universal packaging Sheetline systems designed and engineered to closely meet the needs of sheet thermoformers and packagers.

ICMA SAN GREGORIO SPA

See Compounding/Mixing Systems.

IKEGAI AMERICA CORP.

PCM series of intermeshing, high-speed twin-screw extruders utilize segmented screws. Barrel uses a building-block system so that L/D ratio is easily adjustable. Screws are either corotating or counterrotating. Screw diam. from 29 to 125 mm. (See Compounding/Mixing Systems.)

ITALIAN TRADE COMMISSION

Information and catalogues on Italian Extrusion and coextrusion lines for tubes, pipe, profiles, film, sheet, filament, strapping, tape, pelletizing, and cable coating. Single- or twin-screw extruders available in sizes from 1- to 10-in. diam. and L/Ds from 12: 1 to 35:1.

JAPAN STEEL WORKS AMERICA, INC.

Two types of twin-rotor, continuous fluxing mixers (CIM) for high-intensity compounding. One is a counterrotating twin-rotor type, similar in basic concept to the Farrel Continuous Mixer; the other is a corotating twin-screw compounding extruder (DSM) built under license from Krauss-Maffei. (See Compounding/ Mixing Systems.)

K INC.

Blown film extrusion and converting equipment includes extruders, screws, dies, towers, winders, air rings, gear pumps, and screen changers. Also equipment for film sealing and punching, resin blending, film-scrap recycling, and flexographic printing.

KIEFEL INC.

Blown film extrusion systems for up to seven-layer structures of HDPE, MDPE, LDPE, LLDPE, EVA, ionomer, PP, nylon, EVOH, PET and metallocenes. Complete systems for single- or multilayer blown film at high outputs with superior film strength and uniform film thickness or roll quality. Extruders can be grooved-feed or smooth bore from 30-to 120-mm diam.

Die sizes from 50- to 700-mm diam. Air rings with single or dual lip. Internal bubble cooling available on dies of 120-700 mm. Bubble stabilizing cages in a range of sizes. Take-offs either stationary or oscillating; winders can be surface, center or gap. Take-offs and winders with max. layflat widths of 800-3300 mm.

Accessories include blenders, air chillers, treaters, web guides, gravimetric extrusion-control systems, automatic transverse direction gauge-profile control system and layflat-width control systems.

KOBELCO STEWART BOLLING, INC.

Represents Kobe Steel  and offers heavy-duty, single-screw, hot-melt and compounding extruders in screw sizes from 3 1/2- to 20-in. diam., L/Ds to 30:1, and gear pump extrusion system. Extruders can be heated electrically or with steam or oil, and can be cooled by air or water. Full range of dies and tooling. (See Compounding/ Mixing Systems.)

KRAUSS-MAFFEI CORP.

Counterrotating twin-screw extruders in double-conical and parallel-screw configurations for PVC extrusion of pipe, window lineals, siding custom profiles, fence, etc. Parallel line features 26 L/D ratio for high specific output rates and improved melt quality. High-inventory pipe tooling and vacuum and spray tanks offered. Controls include C4 microprocessor system for total extrusion line control. Company has teamed up with window tooling and downstream suppliers to offer complete systems.

KRUPP WERNER & PFLEIDERER

See Coperion Corp.

LEISTRITZ EXTRUDER CORP.

Corotating and counterrotating twin-screw extruders with screw diam. from 18 to 135 mm for compounding and direct extrusion. Auxiliary equipment for complete production lines.

Laboratory extruder has attachments for corotating and counterrotating twin-screw modes. Auxiliary equipment includes pelletizing, blown film, fibers, sheet, and profile attachments. (See Compounding/ Mixing Systems.)

LUNG MENG MACHINERY (USA) INC.

Offers extruders, including zippers profile extruders, flexographic printing machines, T-shirt and garbage bag roll machines.

MACRO ENGINEERING & TECHNOLOGY INC.

Advanced blown film coextrusion systems with automatic gauge control for polyolefin and barrier films. Specialized center-turret winders, surface winders and web-handling equipment.

MARIS AMERICA CORP.

See Compounding/Mixing Systems.

MEGA MACHINERY, INC.

MegaTech single-screw extruders for sheet, film, profile and reprocessing. Sizes from 1- to 8-in. diam., L/D ratios to 44:1, and drives from 2 to 1000 hp. Specializes in sheet.

Megatron cooling and polishing units ensure smooth transmission of power to chrome polishing rolls for highest quality. Quick Switch roll-change system minimizes downtime, as does Plus 1 system that optimizes heating and cooling. MegaCool cooling conveyor helps increase production rates. MegaTronix complete process-control system available.

MERRITT DAVIS CORP.

Standard and custom single-screw extruders from 3/4 in. to 12 in. with L/D ratios up to 50:1. MX heavy-duty series available in air and water designs. Top-of-the-line MX Super Cool air-cooled extruder offers high-capacity, three-phase base mounted blowers for maximum cooling effeciencies. Low-cost Vanguard series offers a heavy-duty production air-cooled machine. MM series from 3/4 to 1 1/2 for medical and coextrusion applications. Unique stay-open clamp flange and triple-chamber feed throat for MX series are standard. All extruders available with Merrexx high-performance barrier screws with various mixing heads.

Complete extrusion systems for compounding, reclaim, pipe, profile, tubing, sheet, and cast film available as well as extruders for blow molding, fibers and blown film. Full line of wire and cable and fiber-optic equipment and complete systems for insulating and rewind applications. Turnkey packages available with full process technical support.

MITSUBISHI HEAVY INDUSTRIES AMERICA

Monolayer and multilayer cast film and biaxial orientation lines have die widths to 5800 mm. Standard single-screw extruders in 65- to 250-mm diam.; special single-screw mixing extruders (with hexagonal-barrel mixing section) of 50-135 mm. Also tandem extruders from 90/115 to 300/350 mm; counterrotating, conical twin-screw extruders for PVC in 50 and 60 mm; and corotating twin-screw compounders of 45-125 mm. (See Compounding/Mixing Systems.)

MODERN MACHINE-TN

Offers vacuum corrugators for 2-6 in. single-wall pipe and dual-wall pipe up to 48 in. diam., along with dies, water baths and pullers.

MPM POLYMER SYSTEMS INC.

Custom-designed and standard extruders and downstream equipment for film (mono- and biaxially oriented), sheet, profile, and fiber.

Extruders from laboratory scale to 8-in. diam. with all accessories, plus computer-designated single- and multilayer flat and blown film dies.

Fully warranted, reconditioned machinery, plus installation, plant design, and start-up services. Post-consumer scrap recycling systems include installation and start-up.

NEXTROM USA INC.

Manual and microprocessor-controlled wire and cable, fiber-optic, and tubing extrusion systems include dual-flyer payoffs, payoffs stands, NM series single-screw extruders, fixed and manual centering crossheads, entry/exit caterpillars and capstans, multipass cooling troughs, vacuum-calibration troughs, dual automatic coilers, single and dual automatic take-ups, take-up stands, and cabling machinery. Options include diameter, capacitance, temparature, elongation and synchronization control systems.

MPL 32 system is for pipe and tubing for automotive and other engineering applications involving monolayer, multilayer, and shrinkable materials. Produces tubing from 0.16- to 1.26-in. diam. at 20 to 394 ft/min.

MPL 10 produces medical and specialty tubing from 0.04- to 0.4-in. diam. of PVC, urethane, nylon block copolymers, and PE. Outputs from 98 to 984 ft/min.

NFM/WELDING ENGINEERS

Counterrotating, nonintermeshing and corotating, intermeshing twin-screw extruders for compounding, reactive extrusion, devolization, latex conversion, and rubber dewatering and drying. (See Compounding/Mixing Systems.)

OEM, INC.

Broad line of downstream extrusion equipment for pipe, general profiles, window profiles, and plastic fencing.

For PE, PVC, CPVC, and other extruded pipes with product to handle through 54 in. O.D. pipe sizes: vacuum-sizing tanks, extension cooling tanks, water-recirculation systems, pullers, saws, guillotines, coilers, dump tables, custom processing machines, beller for both solvent-weld and Reiber-style gaskets.

For window profiles and fencing: vacuum-calibration tables, vacuum tanks, cooling tanks, pullers, saws, puller/saw combinations, dump tables, and packaging tables.

For general profiles: vacuum tanks, cooling tanks, water-recirculation systems, pullers, saws, and custom machines.

OLYMPIA TOOL & MACHINE CO.

Custom-designed single-screw extruders, specializing in medical tubing, wire insulation, profiles, high-temperature, and fluoropolymer extrusion as well as conventional materials. Sizes from 3/4- to 6-in. diam. with L/Ds of 20:1 to 30:1. Control panel can be floor-standing (HXTA) or tucked under extruder barrel (CP). Manual or automatic air-cooled frictional controls, gear transmissions with oversized thrust bearings, choice of instruments and drive, and control panels meeting JIC-type standards. Optional water troughs, payoffs, takeups, conveyors, crossheads, straight-delivery heads, heated clamps, casters, leveling jacks, bimetallic barrels with or without Inconel facing and flame-hardened Hastalloy or Stellite-tipped screws. Barrier, two-stage FEP, and other custom screw designs available.

PHILLIPS SCIENTIFIC, INC.

Ram extruders for producing ePTFE or UHMW film, sheeting, tube or rod.

PLASTICS EQUIPMENT MARKETING SERVICES INC.

Production and laboratory scale extrusion systems for blown film, sheet, profiles, pipe, and compounding. extruders in 1/2- to 6-in. diam., and complete downstream peripherals. Also rebuilds used extrusion equipment. Scrap reclaim lines with waterring pelletizers from 2- to 6-in.

PLASTIMAC SPA

See America Jet Stream, Inc.

POLYTYPE AMERICA CORP.

Extrusion systems include coextrusion cast film lines and specialty equipment for biaxially oriented single- and multilayer films.

POMINI

See Techint SpA.

PROFILEPIPE MACHINERY INC.

Offers water-cooled, double-wall corrugators for pipe up to 72-in. diam.

PTI/PROCESSING TECHNOLOGIES, INC.

Trident single-screw extrusion systems for applications in compounding, pipe and profile, coextrusion, film and sheet, single and tandem foam sheet, fiber wire and cable, reclaim and extrusion pelletizing. Complete systems in bore sizes from 1.5 through 15 in. diam. and L/D ratios from 7:1 through 48:1. Heavy-duty custom extruders come complete with air- or water-cooling systems; right-hand, left-hand, or tuck-under drive configurations; vented or nonvented barrels, high-performance feedscrew designs; and standard computer control systems, or company's Titan integrated PLC/Computer control system.

High-performance Trident sheet extrusion systems for standard and custom sheet production production for a variety of materials, gauges, widths and finishes. Systems offer features such as vertical, inclined or horizontal roll-stand configurations, three-roll standard or multiple chrome roll setup equipped with roll temperature regulation systems; mono-, coextrusion, or laminated web structure options, and high rate of performance options. Systems are tailored specifically to the application.

Trident multipak extrusion systems suitable for extrusion blow molding of multilayered containers offer custom controls and machine configurations, multiple bore size combinations, and low-melt temperature feedscrews.

Trident dual-diameter extruders feature high-performance machine capacities for foam and film scrap material, single- or double-vented options, special hooper and feed section arrangements, and two-piece barrel and screw assembly for ease of removal.

Supporting systems include Trident CPF water-ring pelletizer, CCF crammer feeder and RAM feeder, intensive wash and drying systems, water filtration and treatment stations, and bulk storage devices.

RANDCASTLE EXTRUSION SYSTEMS, INC.

Single-screw bench and floor extruders for lab and R&D applications. Features include recirculating mixers with twin-screw properties; interchangeable feed sections; and discharge and continually driven screws. Complete systems available for blown film, cast film, fiber, sheet, devolatilization, compounding pelletizing, monofilament, and reactor pumps. Coextrusion cast film and sheet systems offered up to 7 layers, and coextrusion blown film systems up to 11 layers. Viscom on-line rheometer and lab services available.

RDN MANUFACTURING CO., INC.

Post-extrusion equipment for pipe, tubing and profile, as well as complete turnkey lines with die development and operator training. Individual components include dies, vacuum sizers, water baths, air tables, belt pullers, wheel pullers, embossers, traveling saws, servo cutters and dump tables.

REIFENHAUSER INC.

Blown film extrusion systems and components include extruders from 2- to 10-in. diam. with or without IBC, bubble stabilization cages and multiple collapsing frame types, and oscillating nip-roll assemblies with horizontal turning bars. Winding technology for up to 60-in. roll diam. with forward/reverse wind directions with auto-cutover and roll transfer.

Complete North American manufactured control systems (Reicofol), as well as automatic gauge control (Reicoflow segmented air ring), which improves gauge variation.

Single-screw extruders or Reitruder twin-screw extruders, teamed with Mirex-S, Mirex-W, or Serex horizontal and vertical roll stacks. Suitable for in-line or out-of-line thermoforming applications for a variety of polymers including PP, HDPE, HIPS, and PET. Polishing stack rolls in three quality classes available.

Optional equipment includes post-cooling rools and air knives.

ROLLEPAAL USA

Downstream equipment includes tooling, vacuum and spray tanks, pullers, cutters and process control systems for plastic pipe production. Counterrotating parallel twin-screw extruders for pipe from 73 to 132 mm with capacities from 400 to 2500 lb/hr. Features include quick start-up, parallel screw design, high torque, high back-pressure (9000 psi), and hydrostatic thrust bearings.

ROYLE SYSTEMS GROUP

Complete turnkey systems for manufacturing telecommununication, power, automotive, fiber-optic, and other specialty cables. Product line includes payoffs, accumulators, extruders, cooling troughs, capstans, take-ups, computer-control systems and technology. Fiber-optic product line includes draw tower, strength tester, coloring machine, ribbon machine, secondary coating line, stranding line, and sheathing line.

SML EXTRUSION TECHNOLOGY INC.

Features complete coex cast-film lines for LLDPE breathable films with monoaxial orientation. Also offers Sleeve-Touch polishing technology for high clarity film licensed from Chiba Machine Industry Corp. of Japan.

SUPERIOR-MPM TECHNOLOGIES, INC.

Single- and twin-screw extruders including complete systems for cast and blown film, sheet, coating, extrusion coating and laminating, profile, compounding, and film and sheet orienting machine direction and bi-axial. High- and low-boy mountings and custom designs. Complete lines include hoppers, stuffers, screen changers, film and sheet dies, air rings, oscillating nips, winders and unwinds that feature patent-pending Zip Knife splicing/ transferring system, cutters, pullers and pelletizers. Re-engineering and remanufacturing of equipment available.

TECHINT SPA, POMINI DIV.

Single-screw compounding extruders for hot- and cold-feed from mixer or reactor.

Hot-feed extruders recieves material from reactors and delivers it in pelletized form. Range is 12 to 16 in. with max. throughput of 100, 000 lb/hr.

Cold-feed extruder, generally cube- or pellet-fed, ranges from 6 to 15 in. with max. throughput of 14,000 lb/hr.

Mixer-fed extruder, located under the continuous mixer or internal mixer, creates pressure to pump material through a pelletizing die. Range is 2 to 20 in. with max. throughput of 70,000 lb/hr, with or without venting.

All extruders can be equipped with pelletizers in four versions: Underwater, waterring, dry-face, or strand-head.

LCM-AX, a combination of continuous mixer and twin-screw extruder technology, is a single-stage, axial-discharge machine consisting of two corotating and intermeshing screws with the central section featuring the typical rotor blade profile of the LCM (long continuous mixer).

Custom-designed extrusion lines provided. (See also Compounding/Mixing Systems.)

TECHLINE EXTRUSION SYSTEMS, INC.

Complete extrusion systems for blown film (widths of 10 to 160 in.) for LDPE, LLDPE, HDPE and up to five-layer coextrusion. Custom-engineered components include single-screw extruders (for blown film, cast film, and profile extrusion) in diam. of 2 to 4 1/2 in.; manual screen changers; screws; single-layer and multilayer spiral blown-film die assemblies with diam. up to 60 in.; internal-bubble-cooling systems and high-output dual-lip air rings; rotators; take-off nip assemblies; high-speed automatic surface and turret winding systems with in-line slitting, web widths to 160 in., and roll diam. to 60 in.; fixed or adjustable towers; control panels; film treaters; post-gusseters; and any additional auxiliary equipment/ replacement parts.

Custom engineering, updating, and planning services.

TEXAS EXTRUSION SERVICES, INC.

Custom builds and rebuilds high-performance extruders from 2.5- to 8-in. screw diam.

THERMO HAAKE USA

Rheomex laboratory single-screw extruders in 3/4- and 1-in. diam. with L/Ds from 10:1 to 30:1 serve for sample preparation or as sophisticated measuring systems providing process parameters for research, product development, q-c, and scale-up. Extruders can be attached to a simple drive motor or Polylab material characterization and processing center.

Rheomex CTW100p conical twin-screw extruder is for evaluating new compounding formulations, additives, or economics of continuous vs. batch mixing. CTW100p also can serve as a small-scale production line.

Also line of segmented or clamshell parallel twin-screw compounders, and line of take-up and downstream extrusion components for use with all types of extrusion or compounding equipment.

THERMOPLASTICS ENGINEERING CORP.

Extrusion and coextrusion machinery for wire and cable, fiber optics, profiles, industrial/medical tubing, and compounding/ pelletizing.

Extruders range from 3/4- to 2 1/2-in. vertical and 3/4- to 6-in. horizontal. Cast-feed sections include generous cooling core and tangential feed for easy feeding of pellets or powders. Custom designed feed screws. Thrust bearings rated for over 10 years of working life. Barrels are bimetallic lined. Special L/Ds and high-temperature machines available.

Upstream equipment includes payoffs, dancer/accumulators, concentric taping heads, and fiber binding heads.

Downstream equipment includes water troughs (heated/chilled), capstans (wet and dry), takeups (dual or single reel), coilers, water strippers, pelletizers, strand dies and pinch rollers. Also cabling machinery, which include single- and double-twist cablers and respooling equipment.

Complete production lines such as fiber-optic buffing lines, tubing lines and repelletizing lines with optional PLC-based computer controls. All systems custom designed. (See Compounding/Mixing Systems.)

THEYSOHN EXTRUSIONSTECHNIK GMBH

Offers extruders for PVC pipe and profile, including Theysohn Torque Master series of counterrotating twin-screw extruders.

THEYSOHN MASCHINEBAU GMBH

See Compounding/Mixing Systems, Mixaco/Triad Sales LLC.

TOMI MACHINERY MANUFACTURING CO.

Blown film systems with extruders of 40- to 125-mm diam. and the diam. of 20-1200 mm. Conventional upward-extruding versions with rotating dies and air rings, and downward-extruding water-bath systems, optional coextrusion capability, automatic roll changing, computer controls, printers, slit-sealers, corona treaters, and bag makers. Extrusion laminating systems also available.

UNITED PRECISION

Single- and twin-screw extruders and complete process and auxiliary equipment for blown, cast, embossing, sheet and coating/laminating and MDO (machine direction orientation) applications.

Mono and coextrusion blown film dies with "easy flow" polymer-flow technology, "bubble tracker" internal bubble cooling controls and integrated controls and hardware for processing lines.

Custom machine builder for upgrades, rebuilds or integration of new equipment to enhance production capabilities of existing processing.

VICRO RESEARCH INC.

Single-screw extruders from 1- to 8-in. diam. Grooved-feed extruders for HDPE film extrusion up to 4-in. diam. Conical screw extruders for film recycling and crammer feeders. Turnkey production lines for blown film and corrugated pipe. Company also supplies in-line bagmaking equipment.

VULCAN MACHINERY CORP.

Downstream extrusion equipment for tubing, profile, sheet, strand and custom processing applications. Tubing and profile equipment includes complete turnkey systems, fully automatic cut and transfer coiling systems, taper tube and belt pullers, on-demand or continuous mode fly-knife cutters, fixed or traveling saws, discharge conveyors, automated customs machinery, multiplass/multiaxis cooling and precision vacuum tanks.

Sheet equipment includes small sheet lines, runout conveyors, fully automatic cut and transfer (turret) winding systems, fixed shaft winders, automatic stackers, fixed or traveling cross-line and edge-trim saws.

Strand processing equipment line (located between extruder die and pelletizer) includes high line rate cooling baths, vacuum/blower water removal units and auxiliary strand drying racks. Industries served include automotive, medical, packaging, resin and strapping tape.

WARNER SALES ASSOCIATES, INC.

Complete Blown film extrusion lines from Carnevalli with 40- to 120-mm extruders for LLDPE, LDPE, HDPE and coextrusion.

WAYNE MACHINE & DIE CO.

Yellow Jacket line of custom-built single-screw extruders ranges from 3/8 to 8 in. with L/Ds up to 36:1. U.S.-built 19 to 50 mm, 36:1 corotating intermeshing twin-screw extruders supplied for laboratory and production applications, Horizontal, vertical, floor-mounted, table-top, and coextrusion models. Complete systems for tubing, sheet, compounding, rod, wire, blown film, cast film, and extrusion pressure testing, with optional microprocessor control.

Complete coextrusion systems for all process types. Sheet and cast film take-offs are to 24 in. wide and pelletizers 2- and 3-in. wide. Lab and production blown-film towers. Custom new and rebuilt screws and barrels from 1/4 in. to 6 in. for all models of extruders. Specialized in high-temperature, corrosion-resistant flouropolymer extruders and screw/barrel retrofits for existing extruders to run engineering thermoplastics.

High-torque vertical and table-top production-rated extruders feature double-reduction helical gearboxes with shaved, ground and hardened gears instead of worm or enveloping worm gearboxes. Helical box is said to be more efficient than the worm type, resulting in better power transfer to the screw, less wasted energy converted into heat from friction, and less abrasive gear wear than with worm drives. Table-tops units from 1/4 to 1 1/4 in.; vertical singel-post units in 1/4 to 1 1/2 in.; vertical double-post units in 2 and 2 1/2 in.

Custom-bulit downstream equipment includes servo and d-c pullers and cutters. Vacuum tanks, water troughs, air strippers, and dies for blown film, sheet, cast film, strand, tubing, wire insulation, cord coating, and other applications are custom made. (See Compounding/Mixing System.)

WELEX INCORPORATED

For sheet, compounding, profiles, tubing, and most applications, high-performance single-screw extruders from 1.25- to 10-in. diam. with L/D ratios from 24:1 to 40: 1. Direct coupled or belt drive transmissions, closed-loop liquid or high capacity air cooling, and standard or automated process control systems. Sub-assembled extruders available.

Specializes in complete sheet extrusion systems and offers roll stack configurations to suit all sheet applications. Take-offs include silent chain drive, individual roll drive, all gear drive, and the Unistack multi-position roll stack.

Also in-line systems for high-volume thermoformers; coextruders with modular feed blocks for new and existing extruders; gear pumps with controls integrated in extruder panel for new extruders, or as retrofits with free-standing panels. Options include screen changers, dies, air knives, antistatic baths, shears and winders.

Maintains complete spare parts inventory. Field service team assists customer requirements.

WILMINGTON MACHINERY, INC.

Single-screw extruders, coextrusion and extrusion systems. Bore diam. from 1 1/4 through 12 in. L/D ratios from 20:1 to 48:1 Computer controls have tailored software, equipment and process diagnostics, SPC and auxiliary equipment control. Also special bases for multiple extruders or special heights and mounts.

WINDMOELLER & HOELSCHER CORP.

Monolayer up to seven-layer blown film lines for LDPE, LLDPE, HDPE, nylon, EVOH metallocenes and blends with extruders from 2 to 6 in.Varex line includes internal bubble cooling; grooved-feed and smooth-feed throats; Barrier screw technology; oscillating hauloff; and surface/center/ gap turret winders, or combinations of the three.

Besides standards dies from 4.7- to 49-in. diam., company offers its optifil P2 automatic blown film die in diam. from 6 to 35 in. for monolayer films , 6 to 35 in. for three-layer films, and 16 to 20 in. for five-, six-and seven-layer films (New Multicone stack die available for 3 layers and up in diam. of 6-14 in.). Optifil P2 die controls transverse-direction gauge variation automatically, producing tranverse-direction tolerances approaching those in the machine direction. Optifil P2 automatic die can help reduce start-up times and raw-materials consumption, while manufacturing films with increased flatness and minimal curvature.

To complement Optifil P2 automatic die, Optifil Plus process-control system regulates and monitors all product-related extrusion parameters. Optifil P2 is available with varying degress of automation.

Also economically priced Varex equipment available in simple modular design.

XTRUTEC ENGINEERING

Specializes in complete extrusion lines, providing consulting, and turnkey installation for cast film, blown film, extrusion coating, roll coating, laminating, tubing, fiber optics , pipe and profiles.

Single-screw extruders, screws, high-speed winders for cutting most materials to prevent fold-over, unwinds, blown-film dies and low-pressure air rings, low-friction blown-film collapsing frames, manual/ hydraulic/continuous screen changers, and static mixers for improving melt-stream uniformity.

ZENITH PRODUCTS DIV. PARKER HANNIFIN CORP.

PEP-II gear pumps serve as a pressure booster/stabilizer on discharge end of an extruder and for precise additive injection into extruder barrel. made of through-hardened, high-speed tool steels or 400-series stainless for corrosion and wear resistance.

PEP-II utilizes low-aspect-ratio "crowned-root" gears. With L/D ratio of 0.75 vs. Industry standard of 1.0 for helical gears, PEP-II ensures polymers have less distance to travel, reducing tooth pulsations. Crowned roots are parabolic-shaped undercuts, which offer less resistance to tooth evacuation flow and further tooth-pulse reduction. Company says the combination of crowned root and low-aspect ratio gearing provide superior extrusion performance, superior mechanical integrity, and greater efficiency than conventional designs.