Extruder/gear pump.The Technometer is a cold feed extruder equipped with a gear pump A Gear pump uses the meshing of gears to pump fluid by displacement. They are one of the most common types of pumps for hydraulic fluid power applications. Gear pumps however are also widely used in chemical installations to pump fluid with a certain viscosity. capable of processing any type of rubber compounds with a wide range of applications, including precision rubber strip manufacturing to feed injection presses/extruders/calenders; pelletizer; compound refreshing/straining; preformed shapes; precise manufacturing for compression molding Compression molding is a method of molding in which the molding material, generally preheated, is first placed in an open, heated mold cavity. The mold is closed with a top force or plug member, pressure is applied to force the material into contact with all mold areas, and heat ; and compound screening/filtering with optional filtering head. The Technometer combines the performance characteristics of a cold feed extruder (feeding and masticating) with gear pump advantages (accurate control and efficient pressure build-up build·up also build-up n. 1. The act or process of amassing or increasing: a military buildup; a buildup of tension during the strike. 2. ). It is normally equipped with a cutting device and optionally by a filtering head with a manual or hydraulic opening. Advantages are said to include higher quality output; continuous and controlled processing of the compound; output accuracy; and better compound plastication at lower temperature. The gear pump is fully thermoregulated. The cutting system is electronically driven. Rutil/Rubber Molding molding, in architecture, furniture, and decorative objects, a surface or group of surfaces of projecting or receding contours. A molding may serve as a defining element, terminating a unit or an entire composition (e.g. Technology Circle 25 on card |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion