Ergonomic injection molding machine.[ILLUSTRATION OMITTED] The Ergo Latin, therefore; hence; because. ergo (air-go) conj. Latin for therefore, often used in legal writings. Its most famous use was in "Cogito, ergo sum:" "I think, therefore I am" principle by French philosopher Rene Descartes (1596-1650). series of ergonomic rubber injection molding machines features a clamping unit said to offer both maximized platen support, as well as a low working height. To reach this objective, it is not necessary to move the whole combination of clamp cylinder and piston, which causes high horizontal forces on the seals during the phase of acceleration and braking, according to according to prep. 1. As stated or indicated by; on the authority of: according to historians. 2. In keeping with: according to instructions. 3. the company. Because of the clever design and the small number of moving parts Moving parts are the components of a device that undergo continuous or frequent motion, most commonly rotation. "Parts" only include the mechanical components which does not include fuel, or any other gas or liquid. , the clamping unit is said to be very fast and highly reliable. The Ergo clamping system is offered with clamping forces for 280, 460, 630 and 800 metric tons. A FIFO (First In First Out) A storage method that retrieves the item stored for the longest time. Contrast with LIFO. See traffic engineering methods. FIFO - first-in first-out (first in, first out) injection unit is included. Maplan www.maplan.at |
|
||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion