Desert Whale offers rinse-off conditioner.

Here are product formulas supplied by producers of raw materials.

Included in some instances are sources of supply for the raw materials and instructions for preparation and use of the finished product.

No guarantee of performance or safety is implied by Happi.

For more complete details, readers should contact the suppliers directly using the telephone number or website provided with each formula.

If your company has a formula that you think would be of interest to readers of Happi: marketers of soaps & detergents; cosmetics & toiletries; waxes & polishes; disinfectants & sanitizers and other chemical specialties, we will be pleased to consider it for publication. Address all material to:

Formulary Editor

Happi

70 Hilltop Rd.

Ramsey, NJ 07446 USA

Apricot Rinse-Off Conditioner
for Fine Hair

INGREDIENTS:                         % WT.

Phase A
Deionized water                       79.3
Proplylene glycol                      1.0
Hydroxyethylcellulose                  1.0
  (Natrosol)

Phase B
Prunus armeniaca apricot kernel oil    4.0
  (apricot kernel oil)
Glyceryl stearate                      1.5
  (and) PEG-100 stearate
  (Pelemol GSP-100)
Cetyl alcohol                          3.0
Stearalkonium chloride                 3.0
  (Ammonyx 4002)
Dimethicone                            1.0
  (Siltech F-100)

Phase C
Diazolidinyl urea (and)                0.2
  iodopropynyl butylcarbamate
  (Germall Plus)

Phase D
Deionized water                        5.0
Hydroxypropyltrimonium                 1.0
  hydrolized gelatin
  (Peptein QAC)

PROCEDURE:

Solubilize propylene glycol in phase A water.
Disperse hydroxyethylcellulose in PG/water
solution with mixing, while heating A to 70-75[degrees]C.
Combine and heat phase B items to 75-80[degrees]C
with mixing. Add B to A with mixing. Cool
AB with mixing to 50[degrees]C and add Phase C to AB.
Combine D items; mix until a clear solution is
obtained. Cool ABC with mixing to 40[degrees]C. Add D
to ABC; continue mixing until 35[degrees]C is reached.

MORE INFO: Desert Whale Jojoba Co., P.O. Box 41594, Tucson, AZ 85717 Tel: [phone]; Fax: [phone]; Website: www.desertwhale.com

Styling Pomade

INGREDIENTS:                       % WT.

Crodamol STS                        63.0
  (PPG-3 benzyl ether myristrate)
Syncrowax HGL-C                     25.0
  (C18-36 acid triglyceride)
Crill 6                              5.0
  (Sorbitan isostearate)
Mirustyle MFP                        5.0
  (Hydroxypropyltrimonium
  hydrolyzed maize starch)
Fragrance                            2.0

PROCEDURE:

Combine first three ingredients with mixing
and warm until mixture is homogenous.
Remove from heat and add next ingredient with
mixing. Add remaining ingredient when mixture
is cooling.

MORE INFO: Croda Inc., 300-A Columbus Circle, Edison, NJ 08837 Tel: [phone]; Fax: [phone]; Website: www.crodausa.com

Clear Conditioning Shampoo

INGREDIENTS:                            % WT.

Water                                  to 100.0
Sodium laureth-2 sulfate (28%)             10.0
Akypo RLM-45CA                              2.5
  (Laureth-6 carboxylic acid)
Macat ultra CG                              3.0
  (Cocamidopropyl betaine)
Masurf G-2C                                 2.0
  (Glycereth-2 cocoate)
Maquat BPGTMC                               1.0
(Behenoyl Pg-trimonium chloride)
Citric acid                        for pH 6-6.5
Maguard H-55                                0.2
  (DMDM Hydantoin)
Fragrance                                   q.s
Extracts/oils                               q.s

PROCEDURE:
Charge materials into water with agitation in
order listed. Adjust pH to 6-6.5. Add fragrance,
extracts/oils such as aloe vera, chamomile and
jojoba, and Maguard H-55. Adjust viscosity
with sodium chloride.

MORE INFO: Mason Chemical Co., 721 W. Algonquin Rd., Arlington Heights, IL 60005 Tel: [phone]; Fax: [phone]; Website: www.masonsorfactants.com

Chocolate Delight Light Foundation

INGREDIENTS:                            % WT.

Phase A
Chocolate colored pigment CPF            2.00
  formulation 617

Phase B
Dimethicone/vinyl dimethicone           18.00
  crosspolymer
  (Trefil E-506 S [DC 9506 powder])
Silica                                   0.18
  (Cab-o-sil EH-5)
Zinc oxide (and) dimethicone             6.00
  (Z-cote HP-1)

Phase C
Distilled water                          3.82
Water (and) propylene glycol (and)       1.00
  helianthus annuus (sunflower) seed
  oil (and) theobroma cacao (cocoa)
  extract (and) sclerotium gum
  (cocoa phytolait)
Dimethicone                             22.75
  (200 FL 5 CS)
Cyclomethicone                          27.75
  (245 fluid)
Cyclopentasilexane (and)                 5.00
  dimethiconol
  (1501 fluid)
Cyclopentasiloxane (and)                 5.00
  dimethicone crosspolymer
  (and) dimethicone/vinyl
  dimethicone crosspolymer
  (and) dimethiconol
  (9546 silicone elastomer blend)
Theobroma cacao (cocoa) seed butter      1.00
  (Cocoa butter)
Cocos nucifera (coconut) oil             1.00
  (and) gardenia tahitensis
  flower extract
  (Monoi de Tahiti butter-fragranced)
Tocopheryl acetate                       0.50
  (dl-alpha-tocopheryl acetate)
Polysilicone-15                          5.00
  (Parsol-SLX)

Phase D
Fragrance                                1.00
  (Chocolat creme 0310585)

PROCEDURE:
Prepare the pigment powder master batch
according to the instructions in formulation
00617. Combine phase A and phase B in a covered
vessel and mix with high speed dispersing
action until all the powders are uniform. For
larger quantities, use nitrogen gas to make the
head space of the mixer inert as a safety precaution.
To the main mixer vessel, add the
ingredients of phase C and heat with mixing to
45[degrees]C, or until the cocoa butter is melted and the
ingredients are uniform. Add the combined
phases A and B to the mixer in increments.
Good scraping and high-speed dispersing
action is recommended. Add fragrance.

Dew Corning, PO Box 994, Midland, M148686-0994 Tel: [phone]; Fax: [phone] E-mail: [e-mail]; Website: www.dowcorning.com

Anti-Expression Line Cream

INGREDIENTS:                                      % WT.

Phase A
Deionized water                              add to 100
Elestab 388                                         2.5
Glycerine                                           4.0
  (glycerin)
Emulgade CM                                         8.0
  (Cetearyl isononanoate (and)
  ceteareth-20 (and) cetearyl alcohol
  (and) glyceryl stearate (and) glycerin
  (and) ceteareth-12 (and) cefyl palmitate
Keltrol T                                           0.2
  (xantham gum)
Microna matte white                                 1.0
  Mica (and) titanium dioxide
  (and) zinc oxide
Myoxinol LS 9736                                    1.0

Phase B
Cosmedia SP                                         1.0
  (Sodium polyacrylate)
Cetiol CC                                           3.0
  (Dicaprylyl carbonate)
Fitoderm                                            2.0
  (Squalane)
Gransil DMG-6                                       4.0
  (Dimethicone (and) polysilicone-11)
Perfume Cornflower 50-4367                          0.1
  (fragrance)

PROCEDURE:
Combine phase A at room temperature.
Combine phase B. then add to Phase A while
mixing, stirring until homogeneous.

COMMENTS:
Viscosity (mPas): 37,000
pH: 6.4

MORE INFO: Laboratoires Serobiologiques, 3, Rue de Seichamps BP40, 54425 Pulnoy, France Tel: [phone] Fax: [phone] E-ma [e-mail] Website:www.laboratoires-serobiologiques.com

Humidity-Resistant Smoothing
and Straightening Creme

INGREDIENTS:                  %WT.

Phase A
Deionized water              89.62
Carbomer                      0.30
Polyacrylate-14 (~30% TS)     2.33
Panthenol                     0.10
Disodium EDTA                 0.05

Phase B
Stearyl alcohol               1.00
Cetyl alcohol                 2.00

Phase C
Aminomethyl propanol (95%)    0.40

Phase D
Cyclomethicone                0.80
Diisopropyl adipate           1.00
Propylene glycol              2.00
Tocopheryl acetate            0.10
DMDM Hydantoin                0.30

PROCEDURE:
Weigh deionized water into vessel large
enough to provide adequate mixing while
preparing batch. Turn mixer on high enough to
create a vortex in the water. Sift carbomer into
the water's vortex. Allow product to mix for 20-30
minutes or until carbomer is completely
hydrated in the water (no lumps). Heat to 7075[degrees]C.
Slowly add polycrylate 14 to the mixing
vessel. Mix for approximately five minutes.
Continue adding the remaining ingredients
from phase A into the first mixing vessel.
Combine stearyl alcohol and cetyl alcohol in a
separate vessel. Heat slowly to liquefy (70-75[degrees]C).
Once the ingredients in phase B have
liquified, slowly add phase B into phase A. The
materials in phase A should be approx, the
same temperature as the liquefied materials
from phase B (70-75[degrees]C). Allow the product to
mix for approx, five minutes. If solidified flakes
are visible, continue mixing for 10-15 minutes.
Remove heat. Before products cool, neutralize
to pH 6.8-7.2 using aminomethyl propanol.
When mixing vessel is below 40[degrees]C, add phase
D, mix for 10-25 minutes. Cool to room temperature
prior to packaging.

MORE INFO: Noveon Inc., 9911 Brecksville Rd., Clveland, OH 44141-3247 Tel: [phone] or [phone] Website: www.carbopol.com or www.personalcare.noveoninc.com

Liquid Soap
With Orchid Herbalmilk

INGREDIENTS:                                % WT.

Phase A-1
Deionized water                       q.s. to 100
Glycerin                                     3.00
Panthenol                                    0.80
Preservative                                 0.80
  (Phenoxyethanol, methyl-, butyl-,
  ethyl-, propyl-, isobutylparaben)
Amphotensid B4                               10.0
  (Cocoamidopropyl hetaine)
Genapol L-3                                  2.00
  (Laureth-3)
Genapol LRO liquid                          32.00
  (Sodium laureth sulfate)

Phase B
Orchid herbalmilk                            0.10
  (Aqua, prunus dulcis, cetearyl
  glucoside, vanilla planifolia)
Cetiol HE                                    0.50
  (PEG-7 glyceryl cocoate)
Fragrance                                    0.35

Phase C
Deionized water                              4.00
Sodium chloride                              0.50

PROCEDURE:
Mix phase A together while stirring gently. Add
phase B while stirring gently. Add phase C
while stirring gently.

PROPERTIES:
Appearance: minimal turbid
ph value: 5.2

MORE INFO: Cosmetochem Int'l Lid., Seneweidstrasse 44/46, 6312 Steinhausen/Zug, Switzerland Tel: [phone]; Fax: [phone] E-Mail: [e-mail]; Website: www.cosmetochem.ch

Carpet Shampoo

INGREDIENTS:         % WT.

Stepanol WA-extra     19.5
Mackam DAB             4.9
Sodium citrate         6.4
Tomadol 23-5           1.9
Water, D.I.           67.3

PROCEDURE:
Charge water, add ingredients in order and mix
until clear and homogeneous.

USE INSTRUCTIONS:
Dilute 1-2-oz. per gallon of water, use with carpet
shampoo machine.

PROPERTIES:
pH (as is): 6.5-7.5
Appearance @ 25[degrees]C: clear, thin liquid
Freeze/thaw, 3 cycles: pass
4[degrees]C stability (one month): pass
50[degrees]C stability (one month): pass

MORE INFO: McIntyre Group, 24601 Governors Highway, University Park, IL 60466 Tel: [phone]; Fax: [phone] E-mail: [e-mail]; Website: www.mcintyregroup.com