|
| |
Articles
1-132 out of 132 article(s)
| Title |
Author |
Type |
Date |
Words |
| Residual stresses and thermoviscoelastic deformation of laminated film prepared for film insert molding. |
Kim, Sung Ho; Kim, Seong Yun; Lee, Seung Hwan; Youn, Jae Ryoun |
Report |
May 1, 2012 |
3819 |
| Morphology, barrier, and mechanical properties of biaxially deformed poly(ethylene terephthalate)-mica Nanocomposites. |
Soon, Kok; Harkin-Jones, Eileen; Rajeev, Rajvihar S.; Menary, Gary; Martin, Peter J.; Armstrong, Cec |
Report |
Mar 1, 2012 |
9741 |
| Biaxial deformation and experimental study of pet at conditions applicable to stretch blow molding. |
Menary, G.H.; Tan, C.W.; Harkin-Jones, E.M.A.; Armstrong, C.G.; Martin, P.J. |
Report |
Mar 1, 2012 |
9494 |
| Comprehensive thermoelastic analysis of a functionally graded cylinder with different boundary conditions under internal pressure using first order shear deformation theory/Issami skirtingomis ribinemis salygomis kokybiskai veikiancio vidiniu slegiu apkrauto cilindro silumine tamprioji analize, paremta pirmos eiles slyties deformacijos teorija. |
Arefi, M.; Rahimi, G.H. |
Report |
Jan 1, 2012 |
4080 |
| Determination of displacements and stresses in pressurized thick cylindrical shells with variable thickness using perturbation technique/Hermetiniu storasieniu kintamo storio kevalu poslinkiu ir itempiu nustatymas naudojant zadinimo technika. |
Ghannad, Mehdi; Rahimi, Gholam Hosein; Nejad, Mohammad Zamani |
Report |
Jan 1, 2012 |
3371 |
| On the differences in micro-deformation mechanism between isotactic polypropylene and [beta]-nucleated isotactic polypropylene as revealed by the confocal laser scanning microscopy. |
Jancar, J.; Kalfus, J.; Balkova, R. |
Report |
Dec 1, 2011 |
2184 |
| Tensile properties of microbial [beta]-glucan films. |
Blahovec, Jiri; Hejlova, Anna; Copikova, Jana; Novak, Miroslav |
Report |
Dec 1, 2011 |
4271 |
| Studies on deformation characteristics of albumen belkozin membranes using hysteresis loops technique/Baltymines belkozino pleveles apvalkalo deformaciniu savybiu tyrimas panaudojant histerezes kilpas. |
Paulauskas, L.; Kairaitis, R.; Paulauskas, S.; Milcius, E. |
Report |
Nov 1, 2011 |
2064 |
| Experimental identification of the deformation mechanisms during sintering of cold compacted polytetrafluoroethylene powders. |
Canto, Rodrigo Bresciani; Schmitt, Nicolas; Carvalho, Jonas De; Billardon, Rene |
Report |
Nov 1, 2011 |
9390 |
| The analysis of stress deformation state peculiarities of masonry units and bed joints/ Muro gaminiu ir gulsciuju siuliu itempiu deformaciju buvio ypatumu analize. |
Zavalis, Robertas; Jonaitis, Bronius |
Report |
Sep 1, 2011 |
2506 |
| A short-term deformation analysis method of flexural reinforced concrete members/ Naujasis lenkiamojo gelzbetoninio elemento, veikiamo trumpalaikes apkrovos, kreiviu apskaiciavimo metodas. |
Girdzius, Rokas; Kaklauskas, Gintaris; Zamblauskaite, Renata; Jakubovskis, Ronaldas |
Report |
Sep 1, 2011 |
3734 |
| Limited deformability design of high-strength concrete beams in low to moderate seismicity regions/Stipriojo betono siju ribinio deformatyvumo skaiciavimas zemo ir vidutinio seismingumo regionuose. |
Ho, Johnny Ching-Ming; Zhou, Kevin Jian-Hui |
Report |
Sep 1, 2011 |
12199 |
| Solid-phase extrusion of polyamide-6 by using combined deformation schemes. |
Beloshenko, V.A.; Varyukhin, V.N.; Voznyak, A.V.; Voznyak, Yu. V. |
Report |
Jun 1, 2011 |
4093 |
| Monitoring and identification of structural damages/ Konstrukciju pazeidimu matavimai ir prognozavimas. |
Petkevicius, K.; Volkovas, V. |
Report |
May 1, 2011 |
2455 |
| Temperature fields, exchanges and deformations of a precise length comparator microscope/Precizinio ilgio komparatoriaus mikroskopo temperaturiniai laukai ir deformacijos. |
Barauskas, R.; Kasparaitis, A.; Kausinis, S.; Lazdinas, R. |
Report |
May 1, 2011 |
2856 |
| A simplified approach for predicting early-age concrete pavement deformation/Supaprastintas metodas, prognozuojantis ankstyvojo betono dangos deformacijas. |
Kim, Sunghwan; Gopalakrishnan, Kasthurirangan; Ceylan, Halil |
Report |
Mar 1, 2011 |
4536 |
| The physically nonlinear analysis of circular plate on deformable foundation/Apskritos plokstes ant deformuojamo pagrindo fiziskai netiesine analize/Fizikala aplveida platnes nelineara analize uz deformejama pamata/Deformeeritaval alusel paikneva ummarguse plaadi fuusiliselt mittelineaarne analuus. |
Jankovski, Valentinas; Skarzauskas, Valentinas |
Report |
Mar 1, 2011 |
3377 |
| Investigation of multilayered packages resistance to free fall on the solid surface/Daugiasluoksniu pakuociu atsparumo kritimui ant kieto pavirsiaus tyrimas. |
Gegeckiene, L.; Kibirkstis, E.; Miliunas, V.; Volkovas, V. |
Report |
Mar 1, 2011 |
3215 |
| Dynamic response of axially loaded Euler-Bernoulli beams/Asine kryptimi apkrautu Eulerio ir Bernulio siju dinaminis atsparumas. |
Bayat, M.; Barari, A.; Shahidi, M. |
Report |
Mar 1, 2011 |
3344 |
| Molecular orientation behavior of mesomorphic isotactic polypropylene under uniaxial and biaxial deformation. |
Yoshida, Shingo; Ishii, Kazuomi; Kawamura, Takanobu; Nitta, Koh-Hei |
Report |
Feb 1, 2011 |
3606 |
| Model of radial deformations of protector of vehicle tire/ Automobilio padangos protektoriaus radialiniu deformaciju modelis. |
Sapragonas, J.; Darguzis, A. |
Report |
Jan 1, 2011 |
5425 |
| Plastic deformation of low-density polyethylene reinforced with biodegradable polylactide, part 1: microstructural analysis and tensile behavior at constant true strain-rate. |
Rezgui, F.; G'Sell, C.; Dahoun, A.; Hiver, J.M.; Sadoun, T. |
Report |
Jan 1, 2011 |
5152 |
| Plastic deformation of low-density polyethylene reinforced with biodegradable polylactide, part 2: creep characterization and modeling. |
Rezgui, F.; G'Sell, C.; Dahoun, A.; Hiver, J.M.; Sadoun, T. |
Report |
Jan 1, 2011 |
4252 |
| Investigation of error sources measuring deformations of engineering structures by geodetic methods/Inzineriniu statiniu deformaciju matavimu geodeziniais metodais klaidu saltiniu tyrimas/ Inzenierbuvju deformaciju geodezisko merijumu kludu celonu analize/Veaallikate uurimine ehituskonstruktsioonide deformatsioonide mootmisel geodeetilistel meetoditel. |
Aksamitauskas, Vladislovas Ceslovas; Rekus, Donatas; Cirba, Stasys |
Report |
Dec 1, 2010 |
3498 |
| Dynamic geometry of a rotating cylinder with shell thickness variation/Muutuva seinapaksusega poorleva rulli dunaamiline geomeetria. |
Juhanko, Jari; Porkka, Esa; Widmaier, Thomas; Kuosmanen, Petri |
Report |
Dec 1, 2010 |
2863 |
| Flow/pressure characteristics and modeling of deformation processes of single-screw extruders. |
Borisov, A.A.; Berdyshev, B.V.; Hosseini, H.; Shirkavand-Hadavand, B. |
Report |
Oct 1, 2010 |
2751 |
| Strength and deformability of mineral wool slabs under short--term cyclic compression/Trumpalaikemis ciklinemis apkrovomis gniuzdomu akmens vatos gaminiu stiprumo ir deformacines savybes. |
Steponaitis, Laimutis; Vejelis, Sigitas |
Report |
Sep 1, 2010 |
3747 |
| Plastic deformations of steel frame: statics and dynamics/Plieninio remo plastines deformacijos: statika ir dinamika. |
Kargaudas, Vytautas; Adamukaitis, Nerijus |
Report |
Sep 1, 2010 |
1844 |
| Erasing wrinkles, without injection: studies reveal nature's tricks for smoothing deformations. |
Witze, Alexandra |
Brief article |
Aug 14, 2010 |
286 |
| Edge tracing manipulation of clothes based on different gripper types. |
Sahari, Khairul Salleh Mohamed; Seki, Hiroaki; Kamiya, Yoshitsugu; Hikizu, Masatoshi |
Report |
Aug 1, 2010 |
4095 |
| Analysis of deflections up to failure of composite steel fiber-reinforced concrete slabs/Plieniniu plausu armuotu kompozitiniu plienbetoniniu ploksciu ilinkiu iki suirimo analize. |
Petkevicius, Mindaugas; Valivonis, Juozas |
Report |
Jun 1, 2010 |
3363 |
| A study of the deflections of metal road guardrail post/Metalinio automobiliu keliu apsauginio atitvaro statramscio ilinkiu tyrimas/Metala aizturietaisu stabu izliecu petijums/Metallist porkepiirdepostide deformatsiooniuuring. |
Prentkovskis, Olegas; Beljatynskij, Andrey; Juodvalkiene, Edita; Prentkovskiene, Rasa |
Report |
Jun 1, 2010 |
3592 |
| Research and evaluation of methods for determining deformation modulus of a base course of road pavement/Deformacijos modulio nustatymo metodu ant dangos pagrindo sluoksnio tyrimai ir vertinimas/Cela segas pamata deformacijas modela noteiksanas metodes izpete un novertesana/Tee aluse deformatsioonimooduli maaramismeetodite uuring ja hindamine. |
Bertuliene, Lina; Laurinavicius, Alfredas; Vaitkus, Audrius |
Report |
Jun 1, 2010 |
4027 |
| Modeling and analysis of post ejection wall deflections in products made out of polypropylene. |
Ahuett-Garza, Horacio; Aguiar, Francisco; Ponce, Victor |
Report |
May 1, 2010 |
8117 |
| Strength and fracture criteria application in stress concentrators areas/Stiprumo ir irimo kriteriju taikymas itempiu koncentratoriu zonose. |
Ziliukas, A.; Surantas, A.; Ziogas, G. |
Report |
May 1, 2010 |
2240 |
| Analytical solution for penetration of deformable blunt projectiles into the metallic targets/Analitinis ardanciojo buko sviedinio isiskverbimo i metalini taikini skaiciavimas. |
Radmehr, D.; Liaghat, G.H.; Felli, S.; Naderi, D. |
Report |
Mar 1, 2010 |
5692 |
| Finite element mesh size effect on deformation predictions of reinforced concrete bridge girder/Baigtiniu elementu dydzio itaka gelzbetoniniu tiltu perdangu deformaciju skaiciavimo rezultatams/Galigo elementu tikla izmeru ietekme uz deformaciju noteiksanas precizitati dzelzsbetona tiltu sijam/Loplike elementide vorgu suuruse moju armeeritud betoonsilla tala ennustatavale deformatsioonile. |
Gribniak, Viktor; Kaklauskas, Gintaris; Idnurm, Siim; Bacinskas, Darius |
Report |
Mar 1, 2010 |
4485 |
| Prediction of rutting formation in asphalt concrete pavement/Provezu susidarymo asfaltbetonineje dangoje prognozavimas/Risu veidosanas prognozesana asfaltbetona seguma/Roobaste tekke prognoos asfaltkatetes. |
Haritonovs, Viktors; Smirnovs, Juris; Naudzuns, Juris |
Report |
Mar 1, 2010 |
3354 |
| Examination of functionality of car deformation zones recovered after the car accident. |
Prentkovskis, Olegas |
Report |
Mar 1, 2010 |
1144 |
| Damaging of Al-Mg alloys severely plastic deformed by equal channel angular pressing. |
Comaneci, Radu; Comanici, Adrian |
Report |
Jan 1, 2010 |
1245 |
| Optimization of cutting wedge geometry for a plastic disintegrator tool. |
Cernecky, Jozef; Brodnianska, Zuzana |
Report |
Jan 1, 2010 |
1337 |
| Influence of deformation intensity and cooling parameters on microstructure development in QP process. |
Klauberova, Danuse; Jirkova, Hana; Kucerova, Ludmila; Masek, Bohuslav; Hauserova, Daniela; Jenicek, |
Report |
Jan 1, 2010 |
1505 |
| Measurement method for determination of material properties in condition of rapid heating and high deformation rates. |
Jenicek, Stepan; Masek, Bohuslav |
Report |
Jan 1, 2010 |
1486 |
| Innovative technologies for manufacturing and reconditioning of plastic deformation tools. |
Iovanas, Daniela Maria; Iovanas, Radu; Ceorapin Torok, Constantin Grigore; Roata, Ionut Claudiu; Doz |
Report |
Jan 1, 2010 |
1135 |
| A constitutive model for large multiaxial deformations of solid polypropylene at high temperature. |
Sweeney, John; Spares, Robert; Woodhead, Mike |
Technical report |
Oct 1, 2009 |
4524 |
| Elastic solution of axisymmetric thick truncated conical shells based on first-order shear deformation theory/Tampriu storu asimetriniu nupjautos kugines formos kevaliniu strukturu analize taikant pirmos eiles slyties deformacijos teorija. |
Ghannad, M.; Nejad, Zamani M.; Rahimi, G.H. |
Report |
Sep 1, 2009 |
3259 |
| Modelling deformation behaviour of RC beams attributing tension-stiffening to tensile reinforcement/Gelzbetoniniu siju tempiamosios zonos elgsenos modeliavimas armaturos diagrama. |
Salys, Donatas; Kaklauskas, Gintaris; Gribniak, Viktor |
Report |
Sep 1, 2009 |
2470 |
| Evaluation of soil shear strength parameters via triaxial testing by height versus diameter ratio of sample/Grunto kerpamojo stiprumo rodikliu nustatymas naudojant triasio bandymo rezultatus pagal bandinio aukscio ir skersmens santyki ... |
Amsiejus, Jonas; Dirgeliene, Neringa; Norkus, Arnoldas; Zilioniene, Daiva |
Report |
Jun 1, 2009 |
3905 |
| Effects of spot welding on the functionality of thin-wall elements of car's deformation zone/Suvirinimo kokybes itakos automobilio deformaciniu zonu elementu funkcionalumui tyrimas. |
Juodvalkis, D.; Sapragonas, J.; Griskevicius, P. |
Report |
May 1, 2009 |
2782 |
| Investigation of melt extensional deformation of ethylene-vinyl acetate nanocomposites using small-angle light scattering. |
Prasad, R.; Gupta, Rahul K.; Cser, F.; Bhattacharya, S.N. |
Report |
May 1, 2009 |
4970 |
| Research of mine imitator interaction with deformable surface/Minos imitatoriaus saveikos su besideformuojanciu pavirsiumi tyrimas. |
Fedaravicius, A.; Saulys, P.; Griskevicius, P. |
Report |
Mar 1, 2009 |
2079 |
| Rigid-plastic seismic analysis to predict the structural ductility demand. |
Porcu, Maria Cristina; Carta, Giorgio |
Report |
Mar 1, 2009 |
4294 |
| Characterization and control of plastic deformation in mesoscale premolded components to realize in-mold assembled mesoscale revolute joints. |
Ananthanarayanan, Arvind; Gupta, Satyandra K.; Bruck, Hugh A. |
Technical report |
Feb 1, 2009 |
7022 |
| Temperature and speed influence on plastic deformation strength of high speed steel. |
Catana, Dorin; Catana, Dorina |
Report |
Jan 1, 2009 |
1204 |
| A 2D finite element analysis for contact of two cylinders. |
Cananau, Sorin |
Report |
Jan 1, 2009 |
1368 |
| Deflection model of the machine tools. |
Ispas, Constantin; Ibrahim, Ahmed; Bisu, Claudiu |
Report |
Jan 1, 2009 |
1075 |
| Hardening of a blanket of a detail in the grinding process. |
Starshev, Denis |
Report |
Jan 1, 2009 |
1354 |
| Reserches regarding the choosing of the type device for long cylindrical surfaces rotorolling. |
Sava, Ovidiu; Lupescu, Octavian; Popa, Ionut; Scurtu, Ramona Popa; Baciu, Maria |
Report |
Jan 1, 2009 |
1607 |
| The solid model of the deformed flexible gear of the harmonic drive. |
Serban, Remus Ioan |
Report |
Jan 1, 2009 |
1418 |
| The simulation of the loads' effect upon the geometry of a turbine rotor. |
Cuciumita, Cleopatra Florentina; Vilag, Valeriu; Petcu, Romulus; Bogoi, Alina; Stanciu, Virgil |
Report |
Jan 1, 2009 |
1496 |
| Fourier correlations of Dragan Dam horizontal deformation 1D and 2D time series. |
Teusdea, Alin Cristian; Modog, Traian; Gombos, Dan; Mancia, Mircea |
Report |
Jan 1, 2009 |
1123 |
| A comparative study of severe plastic deformation techniques by finite element analysis. |
Comaneci, Radu |
Report |
Jan 1, 2009 |
1141 |
| Mechanical and thermal processes at grinding taking into account elastic deformations of the grinding tool. |
Smirnov, Vitaly |
Report |
Jan 1, 2009 |
1256 |
| Dynamic answer modeling of a mechanism from harvester machines considering the elements deformable. |
Ungureanu, Alin; Geonea, Ionut; Dumitru, Nicolae; Catrina, Gheorghe; Rosca, Valcu |
Report |
Jan 1, 2009 |
998 |
| Effect of crystallite size on the deformation and fracture of poly(vinylidene fluoride-trifluorethylene) ferroelectric copolymer films under uniaxial tension. |
Fang, F.; Yang, W.; Jia, C.; Zhang, F.C. |
Technical report |
Dec 1, 2008 |
2493 |
| Computational Investigation of elastoplastic deformation of a sandwich beam on the elastic foundation. |
Halawa, Moh'd Ishaq Abu |
Report |
Dec 1, 2008 |
2985 |
| Prediction of residual stress and viscoelastic deformation of film insert molded parts. |
Kim, Seong Yun; Oh, Hwa Jin; Kim, Sung Ho; Kim, Chae Hwan; Lee, Seung Hwan; Youn, Jae Ryoun |
Technical report |
Sep 1, 2008 |
3186 |
| Fiber-particle morphological transition and its effect on impact strength of PS/HDPE blends. |
Ramirez-Arreola, D.; Robledo-Ortiz, J.; Moscoso, F.; Gonzalez-Nunez, R.; Rodrigue, D. |
Technical report |
Aug 1, 2008 |
3915 |
| The simultaneous treatment of compression drying and deformation fixation in the compression processing of wood. |
Fukuta, Satoshi; Asada, Fumihito; Sasaki, Yasutoshi |
|
Jul 1, 2008 |
4351 |
| Poly(phenylene sulfide) magnetic composites. II. crystallization, thermal, and viscoelastic properties. |
Wu, Defeng; Wu, Lanfeng; Gao, Fei; Zhang, Ming; Yan, Changhao |
Report |
May 1, 2008 |
5675 |
| On the determination of the shape-type of particles. |
Streit, Franz |
Report |
Mar 1, 2008 |
2802 |
| A simple constitutive model for cyclic compressive ratchetting deformation of polyteterafluoroethylene (PTFE) with stress rate effects. |
Zhang, Zhe; Chen, Xu; Wang, Tao |
Technical report |
Jan 1, 2008 |
3349 |
| The experimental observation and numerical modeling of cast film deformation using novel capillary markers. |
Hallmark, Bart |
Technical report |
Jan 1, 2008 |
9461 |
| Prediction of permanent deformation of pavement's unbounded layers based on cyclic triaxial tests. |
Zlender, B. |
Technical report |
Jan 1, 2008 |
3792 |
| Modified asphalt mixtures resistance to permanent deformations/ Modifikuotu asfalto misiniu atsparumas liekamosioms deformacijoms. |
Radziszewski, Piotr |
Technical report |
Dec 1, 2007 |
6482 |
| Discontinuous deformation in an elastic material. Part 1. Energy dissipative and storage applications. |
Raman, Arun; Farris, Richard J. |
|
Oct 1, 2007 |
6515 |
| Discontinuous deformation in an elastic material. Part 2. Energy dissipative and storage applications. |
Raman, Arun; Farris, Richard J. |
|
Oct 1, 2007 |
6129 |
| Micromechanical deformation processes in PA/layered silicate nanocomposites: correlation of structure and properties. |
Renner, Karoly; Henning, Sven; Moczo, Janos; Yang, Min Soo; Choi, Hyoung Jin; Pukanszky, Bela |
Technical report |
Aug 1, 2007 |
5811 |
| Wood flour filled polypropylene composites: interfacial adhesion and micromechanical deformations. |
Danyadi, Livia; Renner, Karoly; Moczo, Janos; Pukanszky, Bela |
Technical report |
Aug 1, 2007 |
5509 |
| Mathematical modeling for shakedown analysis of offshore structures. |
Fadaee, Mohammad Javad; Saffari, Hamed; Tabatabaei, Ramin |
Technical report |
Jul 1, 2007 |
4076 |
| The compressive strength properties of mineral wool slabs: influence of structure anisotropy and methodical factors. |
Buska, Andrius; Maciulaitis, Romualdas |
Technical report |
Jun 1, 2007 |
6699 |
| Maintainability assurance of plastic deformation tools. |
Baban, Calin Florin; Baban, Marius; Radu, Ioan Eugen |
Report |
Jan 1, 2007 |
1968 |
| Technological aspects concerning severe plastic deformation by equal channel angular pressing. |
Chirita, Constantin; Comaneci, Radu; Zaharia, Luchian; Hanganu, Adrian Constantin |
Report |
Jan 1, 2007 |
994 |
| Compensation of compressor rods deformations using superbolts. |
Eftimie, Lucian; Tierean, Mircea; Baltes, Liana |
Report |
Jan 1, 2007 |
852 |
| The tension state--deformations in the metallic structure of a multifunctional backpack. |
Filipoiu, Ioan Dan; Carutasu, Nicoleta Luminita; Radu, Gheorghe; Baciu, Florin |
Technical report |
Jan 1, 2007 |
1073 |
| Comparsion of prediction of cutting forces with real quantities--part two: comparsion of calculated, and measured forces. |
Filipowicz, Krzysztof; Grzesiak, Dariusz; Krolikowski, Marcin |
Technical report |
Jan 1, 2007 |
1205 |
| Presence on cantilever beam with impact dynamic loadings. |
Hristovska, Elizabeta |
Technical report |
Jan 1, 2007 |
1259 |
| Hydraulic shock absorber with force-deformation characteristic independent with regard to temperature. |
Otlacan, Dimitrie; Duma, Virgil Florin; Kaposta, Iosif; Tusz, Francisc; Dragan, Ioan Florin |
Report |
Jan 1, 2007 |
1052 |
| Rigidity analysis of vibrorolled surfaces. |
Polojintef Corbu, Nicolae; Pater, Sorin; Hule, Voichita; Pater, Mirela |
Technical report |
Jan 1, 2007 |
1274 |
| Investigation on the behavior of rigid polyvinylchloride pipes subjected to uniaxial compression loads. |
Nasser Alhamati, Abdullah Ali; Ghazali, Abdul Halim; Norzaie, Jamalodin; Mohammed, Thamer Ahmed; Abd |
|
Jul 1, 2006 |
4793 |
| A comparison of the thermoformability of a PPE/PP blend with thermoformable ABS. Part I: small deformation methods. |
Morye, S.S. |
|
Oct 1, 2005 |
6054 |
| Mechanical damage detection with high-resolution MFL technology. |
Putnam, Bill |
|
Oct 1, 2005 |
1790 |
| Analysis of Longyangxia dam deformation based on seepage and creep coupling method. |
Haiqing, Guo; Changcun, Gu; Weiya, Xu |
Conference news |
Jan 1, 2005 |
2050 |
| Structural relaxation and evolution of yield stress in epoxy glass aged under shear strain. |
Kawakami, Hiroshi; Otsuki, Ryohei; Nanzai, Yukuo |
|
Jan 1, 2005 |
2641 |
| Cyclic deformation behavior of an epoxy polymer. Part II: predictions of viscoelastic constitutive models. |
Xia, Zihui; Shen, Xinghe; Ellyin, Fernand |
|
Jan 1, 2005 |
4557 |
| Elasticity at large deformations and high strain rates in injection molded polypropylene. |
Dijkstra, P.T.S.; Gaymans, R.J.; Van Dijk, D.J.; Huetink, J. |
|
Sep 1, 2003 |
4625 |
| Comparison of structure development in injection molding of isotactic and syndiotactic polypropylenes. |
Choi, Dongman; White, James L. |
|
Aug 1, 2002 |
4469 |
| Analysis of multiaxial impact behavior of polymers. |
Duan, Y.; Saigal, A.; Greif, R.; Zimmerman, M.A. |
|
Feb 1, 2002 |
4776 |
| Micro-Mechanical Deformation Mechanisms in the Fracture of Hybrid-Particulate Composites Based on Glass Beads, Rubber and Epoxies. |
LEE, JONGHWI; YEE, ALBERT F. |
|
Dec 1, 2000 |
6770 |
| Modeling of the Mechanical Response and Evolution of Optical Anisotropy in Deformed Polyaniline. |
MAKRADI, A.; AHZI, S.; GREGORY, R. V. |
|
Jul 1, 2000 |
4630 |
| Simple Shear Plastic Deformation Behavior of Polycarbonate Plate Due to the Equal Channel Angular Extrusion Process. I: Finite Element Methods Modeling. |
SUE, HUNG-JUE; DILAN, HECTOR; LI, CHRIS K.-Y. |
Brief Article |
Dec 1, 1999 |
4128 |
| Flow induced deformation of dual-phase continuity in polymer blends and alloys. |
Lyngaae-Jorgensen, J.; Rasmussen, K. Lunde; Chtcherbakovav, E.A.; Utracki, L.A. |
|
Jun 1, 1999 |
7425 |
| Optical and acoustical investigation for plastic deformation of isotactic polypropylene/ethylene-1-hexene copolymer blends. |
Yamaguchi, Masayuki; Nitta, Koh-Hei |
|
May 1, 1999 |
3542 |
| Drawing of high density polyethylene tube: effect of different cooling conditions. |
Ulas, I. |
|
May 1, 1999 |
2815 |
| Supersonic defects have the right stuff. |
Wu, C. |
Brief Article |
Feb 13, 1999 |
401 |
| Structural rearrangements during yielding of glassy polymers. |
Kontou, E.; Spathis, G. |
|
Sep 1, 1998 |
4250 |
| Residual stresses, shrinkage, and warpage of complex injection molded products: numerical simulation and experimental validation. |
Kabanemi, K.K.; Vaillancourt, H.; Wang, H.; Salloum, G. |
|
Jan 1, 1998 |
7581 |
| The role of anelasticity in high stress mechanical response and physical properties of glassy polymers. |
David, L.; Quinson, R.; Gauthier, C.; Perez, J. |
|
Oct 1, 1997 |
5803 |
| A physical model of the pressure dependence and biaxial mechanical properties of solid polymers. |
Escaig, B. |
|
Oct 1, 1997 |
10707 |
| The three successive stages of creep of PMMA between 55-degrees celsius and 90-degrees celsius. (poly(methyl methacrylate)). |
Cheriere, J.M.; Belec, L.; Gacougnolle, J.L. |
|
Oct 1, 1997 |
5010 |
| Polymers under mechanical stress: deformation of the nanostructure of isotactic polypropylene revealed by scanning force microscopy. |
Castelein, G.; Coulon, G.; G'sell, C. |
|
Oct 1, 1997 |
4411 |
| Microstructure transformation and stress-strain behavior of isotactic polypropylene under large plastic deformation. |
G'sell, C.; Dahoun, A.; Favier, V.; Hiver, J.M.; Philippe, M.S.; Canova, G.R. |
|
Oct 1, 1997 |
4841 |
| Creep rate variability in gel-spun polyethylene fibers. |
Yakushev, P.N.; Peschanskaya, N.N.; Marikhin, V.A.; Myasnikova, L.P.; Jacobs, M.J.N. |
|
Aug 1, 1997 |
2802 |
| Debonding and fracture of particulate-filled isotactic polypropylene. |
Dubnikova, I.L.; Muravin, D.K.; Oshmyan, V.G. |
|
Aug 1, 1997 |
6751 |
| Modeling droplet deformation in melt spinning of polymer blends. |
Padsalgikar, A.D.; Ellison, M.S. |
|
Jun 1, 1997 |
2823 |
| Structural monitoring with GPS. |
Duff, Keith; Hyzak, Michael |
|
Mar 22, 1997 |
2991 |
| Numerical simulation of blow molding - prediction of parison diameter and thickness distributions in the parison formation process. |
Tanoue, Shuichi; Kajiwara, Toshihisa; Funatsu, Kazumori; Terada, Kousuke; Yamabe, Masashi |
|
Aug 15, 1996 |
4248 |
| Accurate determination of a deformation measure in the screw extrusion process. |
Kim, S.J.; Kwon, T.H. |
|
Jun 15, 1996 |
6559 |
| Measures of mixing for extrusion by averaging concepts. |
Kim, S.J.; Kwon, T.H. |
|
Jun 15, 1996 |
6764 |
| Mechanical and morphological behavior in polystyrene based compatible polymer blends. |
Chun, Byoung Chul; Gibala, Ronald |
|
Mar 1, 1996 |
5127 |
| Effects of particle size and rubber content on fracture toughness in rubber-modified epoxies. |
Kim, D.S.; Cho, K.; Kim, J.K.; Park, C.E. |
|
Mar 1, 1996 |
4232 |
| Modeling and simulation of thermally induced stress and warpage in injection molded thermoplastics. |
Liu, Shih-Jung |
|
Mar 1, 1996 |
6747 |
| Mechanical behavior of a ductile polyamide 12 during impact. |
Schang, O.; Billon, N.; Muracciole, J.M.; Fernagut, F. |
|
Feb 1, 1996 |
5479 |
| Effect of mean strain on the cyclic deformation and stress relaxation in polypropylene. |
Ariyama, Takashi |
|
Sep 1, 1995 |
2751 |
| A constitutive theory for polypropylene in cyclic deformation. |
Ariyama, Takashi; Kaneko, Kenji |
|
Sep 1, 1995 |
4216 |
| The double yield in the tensile deformation of the polyethylenes. |
Lucas, J.C.; Failla, M.D.; Smith, F.L.; Mandelkern, L.; Peacock, Andrew J. |
|
Jul 15, 1995 |
4090 |
| Double yield points in poly(tetramethylene terephthalate) and its copolymers under tensile loading. |
Muramatsu, Shigeru; Lando, Jerome B. |
|
Jul 15, 1995 |
3994 |
| On the phenomenology of yield in bisphenol-A polycarbonate. |
Stokes, Vijay k.; Bushko, Wit C. |
|
Feb 1, 1995 |
7959 |
| Cold-drawing (necking) behavior of polycarbonate as a double glass transition. |
Zhou, Z.; Chudnovsky, A.; Bosnyak, C.P.; Sehanobish, K. |
|
Feb 1, 1995 |
3422 |
| A state variable model for high strength polymers. |
Krempl, Erhard; Bordonaro, Christine M. |
|
Feb 1, 1995 |
3806 |
| Plastic behavior and deformation textures of poly(etherether ketone) under uniaxial tension and simple shear. |
Dahoun, A.; Aboulfaraj, M.; G'Sell, C.; Molinari, A.; Canova, G.R. |
|
Feb 1, 1995 |
7882 |
| Some relationships for the orientational drawing of polymers. |
Vlasov, S.V.; Kuleznev, V.N. |
|
Jan 1, 1995 |
3851 |
|
