DOW CORNING DEVELOPS CONDITIONING SHAMPOO.

Here are product formulas supplied by producers of raw materials.

* Included in some instances are sources of supply for the raw materials and instructions for preparation and use of the finished product.

No guarantee of performance or safety is implied by Happi.

* For more complete details readers should contact the suppliers directly at the address given with each formula. Or, circle the appropriate reader service number on the reader service card found in this issue and drop it in the mail.

If your company has a formula that you think would be of interest to readers of Happi: marketers of soaps & detergents; cosmetics & toiletries; waxes & polishes; disinfectants & sanitizers and other chemical specialties, we will be pleased to consider it for publication. Address all material to:

Formulary Editor

Happi 70 Hilltop Rd. Ramsey, NJ 07446 USA

Clear Conditioning Shampoo

INGREDIENTS:                       % WT.

Phase A
Empicol ESB3 (Marchon)             30.00
  (sodium laureth sulphate)
Deionized water                    30.00
Rewoderm S1333 40 (Witco)           4.00
  (disodium ricinoleamido
  MEA-sulfosuccinate)
Amonyl 380 BA (Seppic)              4.00
  (cocamidopropylbetaine)

Phase B
Glucamate DOE 120 (Amerchol)        1.50
Deinonized water                   24.50

Phase C
Rewomid IPP (Rewo)                  4.00
  (cocamide MIPA)
2-8566 Amino Fluid (Dow Corning)    1.00
  (amodimethicone)

Phase D
Germaben II (ISP)                   1.00
  (propylene glycol (and)
  diazolidinyl urea (and)
  methylparaben (and)
  propylparaben)
Citric Acid                         q.s.
Sodium chloride                     q.s.

PROCEDURE:

In an appropriate vessel, heat ingredients in
phase A to 60 [degrees] C while gently mixing. In an
appropriate vessel, heat Glucamate DOE 120
to 70 [degrees] C, and add deionized water (24.50%)
while mixing. Mix until homogeneous. Add
phase B to phase A. In a separate vessel,
using a water bath, melt Rewomid IPP and
disperse DC 2-8566 Amino Fluid in it. Mix
until uniform. Add phase B to phase C while
mixing slowly. Cool to room temperature
while gently mixing. Add Germaben II. Adjust
pH to around 6.0 with citric acid. Adjust viscosity
with sodium chloride if necessary.

MORE INFO:

Dow Corning, P.O. Box 994, Midland, MI 48686
Tel: [phone]; Fax: [phone]

For more data, Circle 210 on Service Card
Fine Fabric Wash

INGREDIENTS:                            % WT.

Soft water                              81.00
Sodium laureth (3) sulfate              12.00
Incrodet TD7C (Croda)                    3.00
Sodium chloride                          4.00
Triethanolamine                q.s. to pH 7-8
Dye, fragrance, preservative             q.s.

PROCEDURE:

Add ingredients in the order listed, allowing
each to disperse before adding the next. The
finished product will be clear and stable with a
viscosity of about 600 cps at pH of 7-8.

MORE INFO:

Croda, Inc., 7 Century drive, Parsippany, NJ 07054-4698
Tel: [phone]; Fax: [phone];
Website: www.croda.com.

For more data, Circle 211 on Service Card
Ascorbyl PM Cream

INGREDIENTS:                               % WT.

Phase A
Water                                      53.70
Phenoxyethanol (and) methylparaben          0.60
  (and) ethylparaben (and) propylparaben
  (and) butylparaben
Propylene glycol                            3.00
Glycerin                                    3.00
Tetrasodium EDTA                            0.10

Phase B
PEG-40 stearate                             2.00
Glyceryl stearate SE                        5.00
Caprylic capric/triglyceride                5.00

Stearyl alcohol                             3.00
Mineral oil                                17.50
DC Silicone 200/200cs
  (dimethicone)                             0.50
Tocopheryl acetate                          0.10

Phase C
Water                                       2.00
Sodium citrate                              0.50

Phase D
Ascorbyl PM (Presperse)                     3.00
  (magnesium ascorbyl phosphate 10%)
Sodium hyaluronate 1%                       1.00

PROCEDURE:

Combine ingredients of phase A in main kettle
and heat to 78 [degrees] C on propeller mixer, in an
auxiliary kettle, combine phase B ingredients
and heat to 80 [degrees] C. At proper temperature, add
phase B to phase A on propeller mixer. Cool to
40 [degrees] C and add phase C. Cool to 30 [degrees] C and add
phase D.

MORE INFO:

Presperse Inc., 141 Ethel Road West, Piscataway, NJ 08554
Tel: [phone]; Fax: [phone]

For more data, Circle 212 on Service Card
Water Resistant Mascara

INGREDIENTS:                         % WT.

Phase A
Stearic acid                          5.00
White beeswax                         7.50
Ozokerite 170D                        7.50
Black iron oxide                     10.00

Phase B1
Silicones "Plus" Polymer VS80 (3M)    4.00
  (polysilicone-8)
Ethanol, 200 proof                    6.00

Phase B2
Water                                56.35
Trithanolamine                        1.30
Hydroxyethylcellulose                 0.25
PVP K30                               2.00
Methylparaben                         0.10

PROCEDURE:

Thoroughly mix phase A ingredients to 65 [degrees] C
and hold. In a separate container, mix VS80
into ethanol (phase B1) at 50 [degrees] C. Mix phase B2
ingredients in another container. Using a
homogenizer set for moderate mixing, slowly
add phase B1 to phase B2 to form phase B and
blend for 30 minutes while heating to 65 [degrees] C.
Slowly add phase B to phase A using homogenizer
to achieve the emulsion. Package while
still fluid.

MORE INFO:

3M, 3M Center, Building 275-5W-05, St. Paul, MN 55144-1000
Tel: [phone]; Website: www.3M.com/medicalspecialties

For more data, Circle 213 on Service Card
Automatic Dishwashing Detergent

INGREDIENTS:                            % WT.

Phase A
Deionized water                         35.00
Sodium hydroxide (50%)                   4.00
DeTerge CS-45LF (DeForest)               5.00
Tetrapotassium pyrophosphate            15.00
Carbopol 690 (B.F. Goodrich)             1.00

Phase B
Sodium hypochlorite (12.5%)             10.00
Sodium silicate (30%)                    9.00
Alcosperse 465 (Alco Chemical)           3.00

Phase C
Tetrapotassium pyrophosphate            16.50
Carbopol 690 (B.F. Goodrich)        0.50-1.00
Lemon/Lime 2026516 (Aromatech)   q.s. or 0.25
Pylaklor LX 9014 Green 1%        q.s. or 0.25
  (Pylam Products)

PROCEDURE:

Separately mix phase A and phase B in the
order of ingredients provided for each. Phase
A should appear as a paste and phase B as an
opaque liquid. Add phase B to phase A and
mix thoroughly. Add phase C ingredients and
mix until smooth and clear. Mix for at least
five hours.

COMMENTS:

Follow standard dishwashing machine
recommendations. Makes a clear gel.

MORE INFO:

DeForest Enterprises, Amtec Center,
6421 Congress Ave., Boca Raton, FL 33487
Tel: [phone]; Fax: [phone]

For more data, Circle 214 on Service Card
Waterproof Sunscreen Spray Mist

INGREDIENTS:                        % WT.

Anydrous ethanol SDA 3A             64.20
Dionized water                       q.s.
Dermacryl 79 LT (National Starch)    1.00
  (Acrylates/octylacrylamide)

Phase B
Parsol MCX (Roche)                   7.50
  (octyl methoxycinnamate)
Escalol 567 (ISP)                    3.00
  (benzophenone-3)
Dermablock (Alzo)                    3.50
  (methyl anthranilate)
SilCare 41M15 (Clariant)             5.00
  (caprylyl methicone)
Finsolv TN (Finetex)                10.00
  (C12-15 alkyl benzoate)
BHT (Clariant)                       0.02
  (butylated hydroxytoluene)
Nipasol (Nipa)                       0.10
  (propylparaben)
Vitamin E (Promateen)                0.25

Phase C
Fragrance                            0.50

PROCEDURE:

Mix water and ethanol. Disperse Dermacryl
slowly. Mix to clarity. Add ingredients of phase B
one by one; mix until clear. Add fragrance; mix
until clear.

MORE INFO:

Clariant Corp., Functional Chemicals Division,
624 E. Catawba Ave., Mt. Holly, NC 28120
Tel: [phone]; Fax: [phone];
Website: www.clariant.com

For more data, Circle 215 on  Service Card
Moisturizing Lip Protector

INGREDIENTS:                       % WT.

Phase A
Tricaprylin                         8.25
Candelilla wax                     16.00
Microcrystalline wax                4.00
Isopropyl lanolate                 12.00
Ceteyl alcohol                      3.00
Castor oil                         26.75
Uvinul MC 80 (BASF)                 7.50
  (octyl methoxycinnamate)
Uvinul M 40 USP (BASF)              5.00
  (benzophenone-3)
Vitamin E Acetate (BASF)            0.10
  (tocopheryl acetate)
Vitamin A Palmitate (BASF)          0.10
  (retinyl palmitate)
Phytantriol (BASF)                  0.30

Phase B
Luvigel EM (BASF)                   5.00
  (caprylic/capric triglyceride
  (and) sodium acrylates
  copolymer)

Phase C
Luvitol BL (BASF)                   5.00
  (benzyl laurate)
Z-Cote HP-1 (BASF)                  6.00
  (zinc oxide (and) dimethicone)

PROCEDURE:

Pre-mix ingredients in phase C and roller mill
until particulate is completely dispersed (check
dispersion on Hegman Gage). Heat phase A to
75-80 [degrees] C. Add phase B to phase A; mix until
uniform. Add phase C to batch and mix until
uniform. If undipersed ZnO is noticed, use roller
mill until Z-Cote HP-1 is dispersed. Fill into
lipstick containers at temperatures between
72-75 [degrees] C.

MORE INFO:

BASF, 3000 Continental Drive North,
Mount Olive, NJ 07828-1234
Tel: [phone]; Fax: [phone];
Website: www.cosmetic.basf.com

For more data, Circle 216 on Service Card
Non-Aerosol Styling Mousse

INGREDIENTS:                      % WT.

Deionized water                  95.174
Volpo 20 (Croda)                  1.000
  (oleth-20)
AMP-95 (Angus Chemical)           0.176
  (aminomethyl propanol)
Allianz LT-120 (ISP)              2.150
  (acrylates/C 1-2 succinates/
  hydroxyacrylates copolymer)
PVP K-90 (ISP)                    1.000
  (PVP)
Liquid Germall Plus (ISP)         0.500
  (proylene glycol (and)
  diazolidinyl urea (and)
  iodopropynyl butylcarbamate)

PROCEDURE:

Weigh in water; start mixing, (Optional: heat to
35-40 [degrees] C to speed up the Volpo 20 dissolving.) Add
Volpo 20, AMP-95, Allianz LT-120, PVP K-90 and
Liquid Germall Plus in this order, mixing well
after each addition.

COMMENTS:

Appearance: Clear
pH: 7.8

MORE INFO:

ISP, 1361 Alps Rd., Wayne, NJ 07470
Tel: [phone]; Fax: [phone]

For more data, Circle 217 on Service Card