Cycle counter installs easier. (Keeping up with Tooling).The CounterView Coun´ter`view` n. 1. An opposite or opposing view; opposition; a posture in which two persons front each other. Within the gates of hell sat Death and Sin, In counterview. - Milton M. R-Series (CV-R) mold mold, name for certain multicellular organisms of the various classes of the kingdom Fungi, characteristically having bodies composed of a cottony mycelium. The colors of molds are caused by the spores, which are borne on the mycelium. cycle counter from Progressive Components Inc., Wauconda, Ill., has been redesigned for easier installation. The counter now can be installed from the back of the A or B mold plate by drilling an opening and a keying slot for the counter and the actuator A mechanism that causes a device to be turned on or off, adjusted or moved. The motor and mechanism that moves the head assembly on a disk drive or an arm of a robot is called an actuator. See access arm. . The drilling can take place at the same time as ejector-pin clearances and mold pins and bushings are machined. Other counter designs require machining on the side of the mold for the counter and machining from the parting line for the actuator. CV-R is less than 1 in. diam., comes in both left- and right-reading In printing, a photographic image that looks the same as the original. See offset press. Contrast with wrong-reading. styles, and is offered in 13 lengths to accommodate different mold-plate thicknesses. Tel: (800) 269-6653, www.procomps.com |
|
||||||||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion