Cutter/puller system.

Double angle cutter/puller systems have been introduced for cutting extruded products requiring angular cuts. Systems can be configured to cut opposing angles, the same angle on both ends or different angles on each end of a product. They are designed to perform double angle cuts on tubing or profiles for products such as medical tubing, hose, window seals and gaskets. Systems include two servo cutters and an integrated feed system with length control and batch counter. A 6" color touchscreen interface makes setup and operation quick and easy. The servo driven caterpillar feed is electronically linked to the cutter control for the highest degree of cut length accuracy. Cuts are made at rotational speeds up to 1,600 rpm, providing clean, square cuts even at high feed rates, according to the company. Three modes of operation are available, including double angle cutting, single angle using one cutter only or single angle using the second cutter only. The double angle mode offers a continuous cutting speed up to 400 cuts per minute, while the single angle mode is up to 300 cuts per minute. Maximum material capacity is 1" when cutting 45[degrees] or 90[degrees] angles and a maximum width or diameter capacity of .350" when cutting angles of 30[degrees] or 60[degrees]. (Versa Machinery)

www.versamachinery.com