Cut pipe & profiles more accurately.Conair in Pittsburgh says its recently developed position-based servo An electromechanical device that uses feedback to provide precise starts and stops for such functions as the motors on a tape drive or the moving of an access arm on a disk. control for pipe and profile fly-knife cutters increases cut-length accuracy tenfold tenfold Adjective 1. having ten times as many or as much 2. composed of ten parts Adverb by ten times as many or as much Adj. 1. relative to velocity-based servo-cutter controls. Positional servos reportedly are simpler to build and repeatable within 0.1 millisec or less vs. [+ or -]0.5 millisec for velocity-based servos. Not only is it more accurate, but Conair's CSC (Card Security Code) A three- or four-digit number printed on the back of credit cards for security purposes. Called "Card Verification Value" (CVV) by Visa, "Card Validation Code" (CVC) by MasterCard and "Card Identification (CID) by American Express and Discover, Series cutter cutter, small, one-masted sailing vessel, with a rig similar to that of a sloop except that it usually has a sliding bowsprit and a topmast. From 1800 to 1830 cutters were in service between England and France. with positional control costs 84000 less than velocity-based servo models. The series handles profiles of 2 to 5 in. diam. and makes up to 4500 cuts/min in flywheel mode. Tel: (412) 312-6000 * PTDirect 276DT |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion