Printer Friendly

Custom mixing, services.

The following directory lists custom services suppliers. The first part lists custom rubber mixers along with plant locations, equipment, mixing capabilities and whether technical service and/or recipe development are offered. A directory of companies that offer various custom services to the rubber industry follows.

AC Products, Inc.

172 E. La Jolla La Jolla (lə hoi`yə), on the Pacific Ocean, S Calif., an uninc. district within the confines of San Diego; founded 1869. The beautiful ocean beaches, in particular La Jolla shores and Black's Beach, and sea-washed caves attract visitors and  St.

Placentia, CA 92670

714 630-7311

Equipment: Five high speed dispersion mixers and 10 low speed mixers

Mixing capabilities: All water based and solvent soluble resins and polymers

Capacity: 1.2 million gals./yr.

Tech service: yes

Recipe development: yes

Ace Elastomer elastomer (ĭlăs`təmər), substance having to some extent the elastic properties of natural rubber. The term is sometimes used technically to distinguish synthetic rubbers and rubberlike plastics from natural rubber.  Corporation

320 Bryant Blvd.

Rock Hill, SC 29732

877 324-7979

www.aceelastomer.com

AirBoss of America

16441 Yonge St.

Newmarket, Ontario Newmarket (2006 Population 74,295) is a town located approximately 45 km north of Toronto, Ontario, Canada. Newmarket is served by three interchanges along Highway 404. It is the seat of York Region. Southlake Regional Health Centre (hospital) is located in Newmarket. , Canada L3X 2G8

905 751-1188

Fax: 905 751-1101

www.airbossofamerica.com

Robert Hagerman, president and CEO (1) (Chief Executive Officer) The highest individual in command of an organization. Typically the president of the company, the CEO reports to the Chairman of the Board. ; Robert Dodd Robert Dodd or Bobby Dodd may be:
  • Robert Dodd (soldier), (1845–1903), American
  • Bobby Dodd, (1908–1988), American football coach
  • Robert Dodd (baseball), (born 1973), American
  • Robert Dodd (artist)
  • a former mayor of Champaign, Illinois
, executive vice president

Mixing capabilities: Custom rubber mixing of most types of rubber

Capacity: 260 million lbs./yr.

Tech service: yes

Recipe development: yes

Divisions:

AirBoss Rubber Compounding

101 Glasgow St.

Kitchener, Ontario, Canada N2G N2G Need to Go (chat)
N2G Notes2Go (free software and file extension)
N2G Napster to Go
 4X8

519 576-5565

Fax: 519 576-1315

Robert Dodd, executive vice president; John Tomins, vice president sales and marketing; John Bergmann, vice president purchasing; Don McRae Donald Alexander Noel McRae (born 25 December, 1914 in Christchurch, died 10 August, 1986 in Christchurch) was a double international representing New Zealand in cricket and in soccer. His first first-class match was in New Zealand's first Test match against Australia in 1946. , technical manager; Suzanne Fortin, quality manager; Cindy Andrade, purchasing manager A Purchasing Manager is an employee within a company, business or other organization who is responsible at some level for buying or approving the acquisition of goods and services needed by the company. ; George Papazotos, segment manager

Equipment: five mixers, gear pump A Gear pump uses the meshing of gears to pump fluid by displacement. They are one of the most common types of pumps for hydraulic fluid power applications. Gear pumps however are also widely used in chemical installations to pump fluid with a certain viscosity. , extruder, strainer, strip auto plier

Services offered: Custom compounding, development, straining, A2LA accredited lab

Capacity: 180 million lbs.

AirBoss Rubber Compounding

500 AirBoss Pkwy.

Scotland Neck, NC 27874

252 826-4919

Fax: 252 826-4994

Reza Alipour Shehni, plant manager; Bill Anderson, quality manager

Equipment: GK320 mixer

Services offered: Custom compounding, development

Capacity: 50 million lbs.

AirBoss Corporation Technical Center

4909 Unicorn Dr.

Wake Forest, NC 27587

919 488-5580

Fax: 919 488-5585

Wiley Betts, business manager, new product development

AirBoss Engineered Products

881 Landry

Acton Vale, Quebec Acton Vale (2006 Population 7,797) is an industrial town in south-central Quebec, Canada. It is the seat of the Regional County Municipality of Acton (MRC d'Acton). The town covers an area of 90.96 km². The town grew 6.4% from 2001 to 2006. , Canada J0H 1A0

450 546-2776

Fax: 450 546-2776

Yvan Ambeault, director manufacturing

Equipment: Skinner 270, 2 RMS extruders, 4-roll calender CALENDER. An almanac. Julius Caesar ordained that the Roman year should consist of 365 days, except every fourth year, which should contain 366, the additional day to be reckoned by counting the twenty-fourth day of February (which was the 6th of the calends of March) twice.  

AirBoss--Defense

881 rue Roxton

Acton Vale, Quebec, Canada J0H 1A0

450 546-0283

Fax: 450 546-0213

Earl Laurie, president; Sindy Carrier, vice president business development

Services offered: Chemical biological hand, foot and respiratory protective gear--radiological nuclear (CBRN CBRN Chemical, Biological, Radiological, and Nuclear
CBRN Caribbean Basin Radar Network
) military and first response

(see our ad on page 5)

Alloy Polymers, Inc.

3310 Deepwater Terminal Rd.

Richmond, VA 23234

(804) 232-8000

Fax: (804) 230-0386

www.alloypolymers.com

Email: info@alloypolymers.com

Charles Chiappone, CEO/president

Services offered: Color matching, compounding, extruding and vulcanizing extrusions, mixing black, mixing colors

Alttran Inc.

5285 Hudson Dr.

Hudson, OH 44236

330 650-2223

Fax: 330 650-2215

www.alttran.com

Email: Innovation@alttran.com

Jeff Patterson

Equipment: Tilt-body internal mixer

Services offered: Custom compounding, lab testing, product development, problem solving problem solving

Process involved in finding a solution to a problem. Many animals routinely solve problems of locomotion, food finding, and shelter through trial and error.
 

Mixing capabilities: Most polymer types (excludiing silicone) black and non-black compounds

Tech service: yes

Recipe development: yes

American Biltrite

200 Bank St.

Sherbrooke, Quebec “Sherbrooke” redirects here. For other uses, see Sherbrooke (disambiguation).

Sherbrooke (2006 population: 147,427) is a city in south-eastern Quebec, Canada, the only major city in the Eastern Townships.
, Canada J1H 4K3

888 275-7075

Fax: 877 271-1751

Email: gp@american-biltrite.com

Equipment: Two mixers, calender, rollerhead extruder, preformer

Mixing capabilities: Black and colors for all elastomers except silicone

Tech service: yes

Recipe development: yes

American Phoenix, Inc.

800 Wisconsin St., #11

Eau Claire Eau Claire (ō klâr), city (1990 pop. 56,856), seat of Eau Claire co., W central Wis., on the Chippewa at the mouth of the Eau Claire River, in a hilly lake region; inc. 1872. , WI 54703

866-317-1649

www.apimix.net

Email: info@apimix.net

Equipment: Mixers, mills, strip stackers

Mixing capabilities: SBR SBR - Spectral Band Replication , natural rubber, EPDM EPDM Ethylene-Propylene-Diene-Monomer
EPDM Enterprise Product Data Management
EPDM Ethylene Propylene Dimonomer (industrial/commercial piping/plumbing components)
EPDM Engineering Product Data Management
, nitrile nitrile: see rubber.  

Capacity: 300 million lbs./yr.

Tech service: yes

Recipe development: yes

Ampacet Corporation

6600 White Plains Rd.

Tarrytown, NY 10591

914 631-6600

Fax: 914 631-7278

www.ampacet.com

Divisions:

Manufacturing sites:

100 Ampacet Dr.

Cartersville, GA 30120

770 387-0060

Fax: 770 382-2182

125 Ampacet Dr.

DeRidder, LA

337 463-6001

Fax: 337 462-2251

1855 James Pkwy.

Heath, OH 43056

740 929-5521

Fax: 740 928-2077

3701 North Fruitridge Ave.

Terre Haute Terre Haute (tĕr`ə hōt, tĕr`ē hŭt), city (1990 pop. 51,483), seat of Vigo co., W Ind., on the Wabash River; inc. 1816. , IN 47806

812 466-5231

Fx: 812 466-6926

101 Sasaga Dr.

Kichener, Ontario, Canada N2C 2G8

519 748-5576

Fax: 519 748-9767

Privada de la Princesa No. 1

Parque Industrial El Marques

Autopista See also:limited access highway

Autopista is a Spanish language word designating a limited access highway. Autopistas exist in many Spanish speaking countries, including Mexico, Chile, Spain, Cuba, Colombia, Puerto Rico, Venezuela and Argentina.
 Mexico-Queretaro Km. 195.5

Poblado El Colorado

El Marques, Queretaro C.P. 76246

+52 442-253-1084

Fax: +52 442-253-1086

APV APV

See: Adjusted Present Value
 Engineered Coatings

1390 Firestone Pkwy.

Akron, OH 44301

330 773-8911

Fax: 330 773-1028

www.apvcoatings.com

Email: sales@apvcoatings.com

Erin Brown

Equipment: 104 different grinding, mixing and blending pieces of equipment Services offered: Private label, packaging, blending, manufacturing, specialty engineered products

Mixing capabilities: Batch sizes from one gallon to 6,000 gallons, 50 CPS to 2,000,000

Capacity: 12 million gal.

Tech service: yes

Recipe development: yes

Avon Custom Mixing Services

55 High St.

Holbrook, MA 02343

781 767-0511

Fax: 781 767-0619

Timothy E. Nestor, vice president

Equipment: Two #11 mixers, 3A internal mixer, several calenders, two-roll mills and one 8 1/2" x 42" roller die extruder.

Mixing capabilities: All polymers, separate facilities for mixing blacks to prevent contamination of non-blacks and colors, 12"x15" strainer/extruder on-line at non-black mixer, mill mixing of small quantities available

Tech service: yes

Recipe development: yes

Blair Rubber Company

5020 Panther Pkwy.

Seville, OH 44273

330 769-5583

Fax: 330 769-9334

www.blairrubber.com

Email: sales@blairrubber.com

Equipment: Internal mixer and open mill, calendering, slitter, autoclaves

Mixing capabilities: NR, nitrile, EPDM, polychloroprene, chlorobutyl, butyl butyl /bu·tyl/ (bu´t'l) a hydrocarbon radical, C4H9.

bu·tyl
n.
A hydrocarbon radical, C4H9.



butyl

a hydrocarbon radical, C4H9.
, Hypalon, SBR

Capacity: 6 million lbs./yr.

Tech service: yes

Recipe development: yes

Britannia Rubber Mfg. Ltd.

1676 Britannia Rd. East

Mississauga, Ontario For the First Nation, see .

Mississauga (pronounced: [ˌmɪsɪˈsɑgə] listen  
, Canada L4W 1J2

Fax: 302 777-4760

Equipment: Mixers with pelletizers

Mixing capabilities: Most thermoplastic A polymer material that turns to liquid when heated and becomes solid when cooled. There are more than 40 types of thermoplastics, including acrylic, polypropylene, polycarbonate and polyethylene.  elastomers, pelletized EPR EPR Electron Paramagnetic Resonance
EPR Extended Producer Responsibility
EPR Electronic Patient Record(s)
EPR Emergency Preparedness and Response (US DHS)
EPR Endpoint Reference
EPR Ethylene-Propylene Rubber
 and others

Capacity: 70 milllion lbs./yr.

Tech service: yes

Recipe development: yes

Britannia Rubber Mfg. Ltd.

1676 Britannia Rd. East

Mississauga, Ontario, Canada L4W 1J2

905 564-0582

Fax: 905 564-0585

www.britanniarubber.com

Email: sales@britanniarubber.com

Lori Wolstenholme

Equipment: Internal mixer, 3-roll calender, mixing mills, strip cooler/stacker

Services offered: Custom mixing, calendering, strips, slabs

Capacity: 2.1 million lbs./yr.

Tech service: yes

Recipe development: yes

Bruckman Rubber Co.

101 S. St. Joseph Ave.

Hastings, NE 68901

402 463-3129

Fax: 402 463-3406

www.bruckmanrubber.com

Email: sales@bruckmanrubber.com

Equipment: Tilt body dispersion mixer, mills, extruders, roller head die, strip

Burke Industries, Inc.

2250 South 10th St.

San Jose San Jose, city, United States
San Jose (sănəzā`, săn hōzā`), city (1990 pop. 782,248), seat of Santa Clara co., W central Calif.; founded 1777, inc. 1850.
, CA 95112

408 291-8376

Fax: 408 280-0938

Email: moshfegh@burkeind.com

Mike Moshfegh

Equipment: Rubber processing equipment Services offered: Rubber products, mixed, extruded, molded

Mixing capabilities: All types

Capacity: 35 million lbs./yr.

Tech service: yes

Recipe development: yes

Central Rubber Co.

844 E. Jackson St.

Belvidere, IL 61008

815 544-2191

Fax: 815 544-6881

www.centralrubbercompany.com

Services offered: Custom colored rubber milled to customer specifications

Mixing capabilities: All non-black custom rubber compounds, with polymers used--NR, SBR, polychloroprene, Hypalon, nitrile, EPDM, silicone, butyl, urethane urethane (yoor´ithān´),
n ethyl carbamate used as an anesthetic agent for laboratory animals, formerly used as a hypnotic in humans.
 and nitrile/PVC

Capacity: Over 8.5 million lbs.

Tech service: yes

Recipe development: yes

Chardon Custom Polymers LLC (Logical Link Control) See "LANs" under data link protocol.

LLC - Logical Link Control
 

373 Washington St.

Chardon, OH 44024

440 285-2161

Fax: 440 286-8422

Email: jkdevoe@verizon.net

Marian Keener DeVoe, president

Equipment: Mills, mixers, internal mixers, extruders, Barwells, calenders Services offered: Mixing, recipe development, full processing and physical testing

Mixing capabilities: Most elastomers

Capacity: 20 million lbs.

Tech service: yes

Recipe development: yes

Chase Elastomer--a Hexpol Company

635 Tower Dr.

Kennedale, TX 76060

Phone: 817 483-9797

Fax: 817 483-1978

www.chaseelastomer.com

info.kdl@hexpol.com

Chem Technologies Custom Mixing

14875 Bonner Dr,

Middlefield, OH 44062

440 632-9311

Fax: 440 632-9578

Email: kcohill@chemtechnologiesltd.com

www.chemtechnologiesltd.com

Kevin Cohill, V.P. sales and marketing

Equipment: Intermeshing and tangential tan·gen·tial   also tan·gen·tal
adj.
1. Of, relating to, or moving along or in the direction of a tangent.

2. Merely touching or slightly connected.

3.
 internal mixers, bi-conical sheet preformers, mills, pelletizing Pelletizing or pelletising is the process of compressed or molding of product into the shape of a pellet. A large range of different products are pelletized including chemicals, iron ore, animal compound feed, and more.  

Services offered: Custom rubber compounding (strips, slabs, pellets) chemical dispersions (dust suppressed powders and beads, pre-weighed batch inclusive blends, polymer-bound) revirgination of FKM FKM Fluoroelastomer
FKM Fogarty Klein Monroe (Houston, Texas)
FKM Field Kitchen, Modular
 and other exotic polymers

Mixing capabilities: Most elastomers

Capacity: 20 million lbs.

Tech service: yes

Recipe development: yes

(See our ad on page 66)

Compass Polymer Mixing Corp.

147 Oakdale Ave.

Akron, OH 44302

Equipment: #3 mixer and various mills

Mixing capabilities: NBR NBR Number
NBR Nightly Business Report (PBS show)
NBR National Business Review (New Zealand weekly business newspaper)
NBR National Bureau of Asian Research
NBR National Board of Review
, CPE (Customer Premises Equipment) Communications equipment that resides on the customer's premises.

CPE - Customer Premises Equipment
, EPDM, NR, NBR/PVC, SBR, HNBR HNBR Hydrogenated Acrylonitrile-Butadiene Rubber , IR, BR, IIR IIR - Infinite Impulse Response , CR, ECO E·co   , Umberto Born 1932.

Italian writer best known for his novels, including The Name of the Rose (1981). He has also written extensively on semiotics and British and American popular culture.
, AEM AEM Applied and Environmental Microbiology (journal)
AEM Association of Equipment Manufacturers
AEM Academic Emergency Medicine (journal)
AEM Agnico-Eagle Mines Limited
AEM Advanced Engine Management
, ACM (Association for Computing Machinery, New York, www.acm.org) A membership organization founded in 1947 dedicated to advancing the arts and sciences of information processing. In addition to awards and publications, ACM also maintains special interest groups (SIGs) in the computer field. , FKM

Capacity: 36 million pounds

Tech service: yes

Recipe development: yes

Cri-Sil Silicone Technologies, LLC

359 Hill St.

Biddeford,, ME 04005-3949

207 283-6422; 800 290-9192

Fax: 207 283-6551

www.cri-sil.com

Email: info@crisil-silicones.com

Mark C. Stevens, sales and marketing manager

Equipment: Sigma blade mixers, planetary mixers, mills, extruders.

Services offered: Full technical service, custom compounding, recipe development. Mixing capabilities: Silicone and fluorosilicone, HCR HCR High Commissioner for Refugees (UN)
HCR Home Condition Report
HCR Health Care Reform
HCR Highway Contract Route (US Postal Service)
HCR High Consistency Rubber
HCR Human Cognitive Reliability
, RTV RTV Room Temperature Vulcanizing (elastomer sealant)
RTV Radio Television (educational major)
RTV ReplayTV (digital video recorder brand)
RTV Real-Time Video
RTV Return To Vendor
 and LSR 1. (networking) LSR - Label Switching Router.
2. (operating system) LSR - Local Shared Resources.
, compounds, bases, dispersions

Capacity: 16-18 million lbs./yr.

Tech service: yes

Recipe development: yes

(See our ad on page 70)

Cri-Tech Inc.

85 Winter St.

Hanover, MA 02339-2553

800 826-5699; 781 826-5600

Fax: 781 826-5770

www.critechinc.com

Email: info@critechinc.com

Randy Brown
For other uses, see: Randy Brown (disambiguation).


Randy Brown (born May 22, 1968, in Chicago, Illinois) is an American former professional basketball player. A 6'2" (1.
, v.p. technology

Equipment: Two computer controlled 3D internal mixers and 1D internal mixer, one twin screw extruder.

Services offered: Fully equipped rubber laboratory

Mixing capabilities: Fluoroelastomer compounds, dispersions, HNBR compounds, BRE (Business Rules Engine) Software that automates policies and procedures within an organization, whether legal, internal or operational. The use of a rules engine (BRE) requires placing the company rules in an external repository that can be easily reviewed rather than  (Aflas), perfluoroelastomers (FFKM FFKM Federalist Movement; National Council of Christian Churches (Madagscar) ) FDA grade elastomer; flouropolymer compounding

Capacity: 8 million lbs./yr.

Tech service: yes

Recipe development: yes

Crossville Rubber, Inc.

65 Highland St.

Crossville, TN 38555

800 233-6288

Fax: 931 484-4040

www.crossvillerubber.com

Email: info@crossvillerubber.com

Gus Biddle, vice president

Equipment: Mixers, Farrel #11, two Farrel #9, three complete lines capable of producing sheets up to 84" wide (one with vinyl coating capability), guillotines, autoclaves, compression presses, die cut presses

Mixing capabilities: SBR, natural, polychloroprene, nitrile

Capacity: 50 million lbs./yr.

Tech service: yes

Recipe development: yes

Custom Rubber Mix, Inc.

10798 Catawba Ave.

Fontana, CA 92337-7398

909 356-1296

Fax: 909 356-1667

Ben Cannon Ben Cannon is an American teacher and politician from Oregon. He was elected in 2006 to the Oregon House of Representatives, representing the state's 46th District, in Portland.

Cannon was educated at Washington University in St.
, president

Equipment: #3A mixer, two #1 mixers, nine mills, 64" 3-roll calender, Barwell preformer, 3-1/2" extruder

Mixing capabilities: All elastomers

Tech service: yes

Recipe development: yes

Depco Inc.

20 Newton Place

Hauppauge, NY 11788-4752

631 582-1995

Fax: 631 582-2015

Equipment: Mills and mixers

Mixing capabilities: Exclusively silicone

Capacity: 1 million lbs./yr.

Tech service: yes

Recipe development: yes

Discas, Inc.

P.O. Box 1348

56 Eagle St.

Waterbury, CT 06708

203 753-5147

Equipment: #9 mixer, 60" mill, three lab mills, lab mixer; 6", 2-1/2" and 1-1/2" extruders, underwater pelletizer, Henschel mixer, film densifiers, 4-1/2" extrusion line, hot face pelletizer, 10" Rugle extruder, size six FCM FCM

See: Futures commission merchant


FCM

See futures commission merchant (FCM).
 compounder line

Mixing capabilities: TPEs, recycled polypropylenes (homo copolymers), polyethylenes (low density, high density), polystyrenes (crystal, impact), tire crumb based TPEs

Capacity: 25-30 million lbs./yr.

Tech service: yes

Recipe development: yes

Dow Corning Dow Corning is a multinational corporation headquartered in Midland, Michigan, USA. Dow Corning specializes in silicon and silicone-based technology, offering more than 7,000 products and services. Dow Corning is equally owned by The Dow Chemical Company and Corning, Inc.  

Corporate Headquarters

2200 W. Salzburg Rd.

P.O. Box 994

Midland, MI 48686-0994

989 496-4000

Fax: 989 496-4586

Capacity: 34 million lbs./yr.

Tech service: yes

Recipe development: yes

Divisions:

Dow Corning, Midwestern Region

U.S. 6 Hwy.--East

Kendallville, IN 46755

260 347-5813

Dave Jurkiewicz, general manager

Equipment: Mills, extruders, dough mixers, development lab

Mixing capabilities: Silicones, fluorosilicones, color masterbatches

Tech service: yes

Recipe development: yes

Dow Corning, Western Region

20832 Currier Rd.

Walnut, CA 91789

909 595-6331

Sandra Cuellar, technical manager

Equipment: Mills, extruders, dough mixers, full lab

Mixing capabilities: Silicones, fluorosilicones, color masterbatches

Tech service: yes

Recipe development: yes

Dyna-Mix, Inc.

P.O. Box 369

Country Club Rd.

Grafton, WV 26354

800 255-2681

304-265-5100

Fax: 304 265-5104

www.dyna-mix.com

Email: dalewagner@dyna-mix.com

Dale Wagner, vice president sales and marketing

Equipment: One 270 6-wing rotor and one 270 4-wing rotor mixers; variable speed mixers and dual mill take-offs: extruder/strainer, granulator and Barwell. Services offered: Custom mixed rubber (black and color), straining, rubber granulating and preforming capabilities

Mixing capabilities: All general purpose polymers

Capacity: 100 million lbs.

Tech service: yes

Recipe development: yes

Divisions:

Dyna-Mix, Inc.

P.O. Box 4726

S. Lyons St.

Tyler, TX 75712

800 527-8403

Fax: 903 596-7532

Email: dminick@dyna-mix.com

David Minick, manager manufacturing service

Equipment: One 305 4-wing, variable speed mixer and dual mill take-off; one kneader 110-300 tilt; 50" mill

Services offered: Custom mixed rubber (black and color), all polymers except silicone

Mixing capabilities: All general purpose polymers

Capacity: 40 million lbs.

Eagle Elastomer, Inc.

70 Cuyahoga Falls Cuyahoga Falls, city (1990 pop. 48,950), Summit co., NE Ohio, on the Cuyahoga River; inc. 1836. On its course through the city the river drops 220 ft (67 m) through a series of falls and rapids.  Industrial Pkwy.

Peninsula, OH 44264

330 923-7070

Fax: 330 923-4005

www.eagleelastomer.com

Email: eagle1@eagleelastomer.com

Neil S. McHale, sales, extrusion and sheet; Tommy C. Taylor, sales, custom

mixing

Equipment: Internal mixer, mills, calender, granulator, extruders, autoclaves and curing ovens

Services offered: Tech service, recipe development

Mixing capabilities: Fluoroelastomer and perfluoroelastomer compounds

Capacity: 1 million lbs./yr.

Tech service: yes

Recipe development: yes

(see our ad on page 8)

Eaton Corporation This article is about an industrial manufacturer. For other meanings see Eaton.

Eaton Corporation (NYSE: ETN) is a diversified industrial manufacturer with 2006 sales of $12.4 billion, putting it at 198 on the Fortune 500 for 2007.
 

860 Blankenship Rd.

Newbern, TN 38059

731 627-2531

Fax: 731 627-6165

www.eaton.com

Email: douglasfortman@eaton.com

Douglas Fortman

Equipment: Various

Services offered: Custom mixing

Mixing capabilities: NR, EPDM, SBR, NBR, CR, CSM CSM - ["CSM - A Distributed Programming Language", S. Zhongxiu et al, IEEE Trans Soft Eng SE-13(4):497-500 (Apr 1987)]. , ECO, BR, IR, HNBR, EPM EPM

equine protozoal myeloencephalitis.
, XNBR XNBR Carboxylated Nitrile Rubber  

Capacity: 74 million lbs./yr.

Tech service: yes

Recipe development: yes

Elastomer Processing Corp.

2448 West 24th St.

Chicago, IL 60608

773 254-4039

Fax: 773 254-6768

Kevin Wesolowski, operations manager See datacenter manager.  

Equipment: #9 mixer, 84" mill, five 60" mills, 60" calender, 50" calender, extruders

Services offered: Custom rubber mixing

Mixing capabilities: All types excluding silicone

Capacity: 10 million lbs./yr.

Tech service: yes

Recipe development: yes

Divisions:

EPG/Kansas City Plant

2035 Washington St.

Kansas City Kansas City, two adjacent cities of the same name, one (1990 pop. 149,767), seat of Wyandotte co., NE Kansas (inc. 1859), the other (1990 pop. 435,146), Clay, Jackson, and Platte counties, NW Mo. (inc. 1850). , MO 64108

816 842-7377

Fax: 816 471-0958

Robert L. Peterson, manager

Elastomix U.S.A.

3560 West Market St., Ste. 210

Akron, OH 44333-2660

330 666-2935

Fax: 330 668-2066

Email: emixes@neobright.net

Stacy Miller

Equipment: Mills, mixers

Mixing capabilities: Most elastomers

Capacity: 400 tons

Tech service: yes

Recipe development: yes

Fulflex

32 Justin Holden Dr.

Brattleboro, VT 05301

800 283-2500

Fax: 802 257-5602

www.fulflex.com

Email: usa@fulflex.com

Jay Waltz, vice president, sales and marketing

Services offered: Calendering black, calendering colors, compounding, mixing black, mixing colors

Gel Concepts LLC

30 Leslie Ct.

Whippany, NJ 07981

973 884-8995

Fax: 973 884-1331

www.gelconcepts.com

Email: gelconcepts@hotmail.com

Services offered: Custom elastomeric materials and gels

Capacity: 7 million lbs.

Tech service: yes

Recipe development: yes

Gendon Polymer Services, Inc.

5 Marconi Court

Bolton, Ontario Bolton is the most populated village in the township of Caledon, located in the Region of Peel, approximately 50 kilometers north-west of Toronto, Canada. In regional documents, it is referred to as a 'Rural Service Centre'. , Canada L7E 1H3

(905) 951-6118

Fax: (905) 951-6119

www.gendon.com

Email: info@gendon.com

Don Carefoot, CEO

Equipment: Extruders, internal mixers, mills, pelletizers, ribbon blenders

Services offered: Calendering black, color matching, compounding, conversion (liquid to dry), milling, mixing black, mixing colors, pelletizing

Gold Key Processing, Inc.--a Hexpol Company

14910 Madison Rd.

Middlefield, OH 44062

440-632-0901

Fax: 440-632-0929

www.hexpolcompounding.com

Email: info.mid@hexpol.com

Edward Seeley, manager sales and marketing; Dale Wagner, manager sales and

marketing; Randy Simpson, managing

director

Equipment: One Krupp GK250, two Shaw K6A mixers with multi take-off, one Krupp GK45E pilot mixer

Services offered: Custom rubber mixing

Mixing capabilities: Natural rubber and all synthetic polymers except silicone

Capacity: 95 million lbs./yr.

Tech service: yes

Recipe development: yes

(see our ad on second cover)

Goldsmith & Eggleton, Inc.

300 First St.

Wadsworth, OH 44281

330 336-6616

800 321-0954

Fax: 330 336-1072

www.goldsmith-eggleton.com

Email: reggleton@goldsmith-eggleton.com

Rob Eggleton, vice president, mgr. sales and marketing

Equipment: F-270 internal mixer, F-305 internal mixer

Services offered: Carbon black masterbatches

Mixing capabilities: Industry standard SBR BMB BMB Biochemistry and Molecular Biology (BMB Reports)
BMB Boy Meets Boy (webcomic)
BMB British Murder Boys (techno music producers)
BMB Better Music Builder
, as well as EPDM, IR, SBR/ BR and customer proprietary masterbatches

Capacity: 65-70 million lbs./yr.

Tech service: yes

Recipe development: yes

(see our ad on page 65)

Graphic Arts graphic arts: see aquatint; drawing; drypoint; engraving; etching; illustration; linoleum block printing; lithography; mezzotint; niello; pastel; poster; silk-screen printing; silhouette; silverpoint; sketch; stencil; woodcut and wood engraving.  Rubber, Inc.

101 Ascot Pkwy.

Cuyahoga Falls, OH 44223

330 923-4101

Fax: 330 923-4464

www.graphicartsrubber.com

Email: info@graphicartsrubber.com

Glen Hoffman, president

Equipment: Calenders, mills and slitting equipment

Services offered: Mixing and calendering

Mixing capabilities: Open mill only

Capacity: 5 million lbs./yr.

Tech service: yes

Recipe development: yes

Hawkins Industrial Resource Co.

1001 East 18th St.

Muncie, IN 47302

765 282-6021

Fax: 765 288-2490

Email: hirc1@iquest.net

Darryal Hawkins

Equipment: 16", 42" and 60" mills and #1 internal mixer

Services offered: Specializing in small batch custom mixing; 5 lbs. and up

Mixing capabilities: SBR, EPDM, EVA, natural, Viton, Vamac, Hypalon, nitrile, hydrogenated nitrile, carboxylated nitrile, millable urethane

Hexpol Compounding--Burton Rubber Processing

260 Old State Route 34

P.O. Box 377

Jonesborough, TN 37659

423 753-2196

Fax: 423 753-3379

www.hexpolcompounding.com

Email: info.jon@hexpol.com

(See our ad on page 2nd cover)

Hexpol Compounding--Burton Rubber Processing

14330 Kinsman kins·man  
n.
1. A male relative.

2. A man sharing the same racial, cultural, or national background as another.


kinsman
Noun

pl -men
 Rd.

Burton, OH 44021

440 834-4644

Fax: 440 834-5524

www.hexpolcompounding.com

Email: info.btn@hexpol.com

Hexpol Compounding--California

8227 Sorensen Ave.

Sante Fe Springs, CA 90670

562 945-1241

Fax: 562 698-6818

www.hexpolcompounding.com

Email: info.sfs@hexpol.com

Hexpol Compounding--Colonial Rubber Works

150 S. Connell Ave.

Dyersburg, TN 38024

731 285-4353

Fax: 731 287-3098

www.hexpolcompounding.com

Email: info.dyr@hexpol.com

Hexpol Compounding--NC

280 Crawford Rd.

Statesville, NC 28625

704 872-1585

Fax: 704 872-7243

www.hexpolcompounding.com

Email: info.sta@hexpol.com

Hexpol Compounding--Mexico

Av. Japon #302

Parque Industrial San Francisco San Francisco (săn frănsĭs`kō), city (1990 pop. 723,959), coextensive with San Francisco co., W Calif., on the tip of a peninsula between the Pacific Ocean and San Francisco Bay, which are connected by the strait known as the Golden  

San Francisco de Los Romo San Francisco de los Romo is a town and its surrounding municipality of the same name in the Mexican state of Aguascalientes. It stands at  in the central part of the state.  

CP 20304, Aguascalientes, Mexico

+52 449 139-3270

Fax: +52 449 139-3289

www.hexpolcompounding.com

Email: info.ags@hexpol.com

Hexpol Compounding Queretaro SA de CV

La Noria 115

Parque Industrial Querataro

C.R 76220, Santa Rosa Jauregui

Queretaro, Mexico

+52 442 211-3500

Fax: +52 442 211-3501

www.hexpolcompounding.com

Email: info.qro@hexpol.com

Hexpol Compounding sprl (Belgium)

Industriestrasse 36

4700 Eupen

Belgium

+32 (0) 87 59 54 30

Fax: +32 (0) 87 74-44-73

www.hexpolcompounding.com

Email: info.eup@hexpol.com

Hexpol Compounding (Foshan) Co.

No. 3 Xinhui Rd.

Wusha, Daliang, Shunde District

Foshan Guangdong 52833

China

+86 0757 2291-5100

Fax: +86 0757 2291-5149

www.hexpolcompounding.com

Email: info.fsc@hexpol.com

Hexpol Compounding (Qingdao, China)

899 Qingdao Middle Rd.

266431 Jiaonan, Qingdao

China

+86 532 8173-1118

Fax: +86 532 8173-1119

www.hexpolcompounding.com

Email: info.qdo@hexpol.com

Hexpol Compounding sro (Czech Republic Czech Republic, Czech Česká Republika (2005 est. pop. 10,241,000), republic, 29,677 sq mi (78,864 sq km), central Europe. It is bordered by Slovakia on the east, Austria on the south, Germany on the west, and Poland on the north. )

Sumperska 1344

78391 Unicov

Czech Republic

+42 (0) 585 004 011

Fax: +42 (0) 585 053 568

www.hexpolcompounding.com

Email: info.uni@hexpol.com

Hexpol Compounding GmbH (Germany)

Ottostrasse 34

41836 Huckelhoven

Germany

+49 (0) 2433 97 55 0

Fax: +49 (0) 2433 97 55 99

www.hexpolcompounding.com

Email: info.huk@hexpol.com

Hexpol Compounding Gislaved Gummi AB (Sweden)

Abjornsgatan 9

332 36 Gislaved

Sweden

+46 (0) 371 848-00

Fax: +46 (0) 371 848-88

www.hexpolcompounding.com

Email: info.gis@hexpol.com

Hexpol Compounding--UK Ltd.

Unit 3, Fifth Ave.

Tameside Park, Dukinfield

Cheshire, England SK16 4PP

+44 161 343-4433

Fax: +44 161 343-4422

www.hexpolcompounding.com

Email: info.duk@hexpol.com

Hexpol Compounding Elasto UK

Don Street Middleton

Manchester, England M24 2GG

+44 161 654-6616

Fax: +44 161 654-2333

www.elastotpe.com

Email: info@elasto.co.uk

Hexpol Compounding Elasto Sweden

Box 51--Gamla Ornasgatan 15

662 22 Amal

Sweden

+46 532 607-500

Fax: +46 532 607-599

www.elastotpe.com

Email: info@elasto.se

Hiawatha Rubber Co.

1700 67th Ave. North

Minneapolis, MN 55430

763 566-0900

Fax: 763 566-9537

www.hiawatharubber.com

Email: sales@hiawatharubber.com

Donna Zroka, sales manager sales manager ngerente m/f de ventas

sales manager ndirecteur commercial

sales manager sale n
 

Equipment: 30 mold presses (including injection press), up to 42" x 42" platen, robotic CNC (Computerized Numerical Control) See numerical control.

CNC - Collaborative Networked Communication
 grinding, cylindrical grinding, three 60" mills, cryogenic deflasher, eight manufacturing cells

Mixing capabilities: Custom molded precision rubber rollers and rubber-to-metal bonded rubber parts and all rubber parts

Tech service: yes

Recipe development: yes

Hoke hoke  
tr.v. hoked, hok·ing, hokes Slang
To give an impressive but artificial, false, or deceptive quality to: hoked up some phony allegations.
 Rubber Products, Inc.

140 School Rd.

Raeford, NC 28376

800 336-5313

Fax: 910 875-6050

www.hokerubber.com

Duane Presti, CEO/president

Equipment: Two mixers, two mills, extruder, roller-die, calender

Mixing capabilities: Most elastomers

Capacity: 25 million lbs./yr.

Tech service: yes

Recipe development: yes

Divisions:

Hoke Rubber

Presti Group/Hoke Rubber Products

200 Hyde Park Hyde Park, park, London, England
Hyde Park, 615 acres (249 hectares) in Westminster borough, London, England. Once the manor of Hyde, a part of the old Westminster Abbey property, it became a deer park under Henry VIII.
 

Doylestown, PA 18901 800 331-7935

Fax: 215 340-2932

IER IER Institut d'Economie Rurale
IER Institute for Economic Research (Ljubljana, Slovenia)
IER Institute for Employment Research
IER Ion-Exchange Resin (building material)
IER Initial Environmental Review
 Fujikura, Inc.

8271 Bavaria Rd.

Macedonia, OH 44056

330 425-7121

Fax: 330 425-7596

www.ierfujikura.com

Email: sales@ierfujikura.com

John Markiewicz

Equipment: Cryogenic deflashers, curing ovens, cutting, deflashing, dipping, dryers, extruders, grinders, internal mixers, lathes, mills, presses--compression, hydraulic, injection, transfer and punch, trimmers

Services offered: Color matching, compounding, cutting general, deflashing, grinding, injection molding injection molding
n.
A manufacturing process for forming objects, as of plastic or metal, by heating the molding material to a fluid state and injecting it into a mold.
, milling, mixing black, mixing colors, mold making, molding general, preforming, processing

Infinity Rubber Technology Group

170 North Queen St.

Toronto, Ontario, Canada M9C 1A8

416 626-0701

800 565-5875

Fax: 416 626-5156; 800 561-9657

www.infinityrubber.com

Email: kcalitzo@infinityrubber.com

Katherine Calitzo

Equipment: Calenders, internal mixers, mills and slitters

Services offered: Custom mixing, recipe development

Mixing capabilities: NR, BR, SBR, IR, CR, NBR, CIIR CIIR Catholic Institute for International Relations
CIIR Center for Intelligent Information Retrieval
CIIR counterintelligence information report (US DoD)
CIIR Canadian International Information Resource
, IIR, EPDM

Capacity: 80 million lbs./yr.

Tech service: yes

Recipe development: yes

J&J Polymers, Inc

445 S. Beverly Lane

Arlington Heights Arlington Heights, village (1990 pop. 75,460), Cook county, NE Ill., a residential suburb of Chicago; founded 1836, inc. 1887. Its manufactures include machinery, drugs and medical equipment, and metal fabrication. Arlington Park racetrack is there. , IL 60005-2101

847 392-1878

Fax: 847 392-9828

Harold M. Whitacre, Jr., president

Equipment: Mills

Mixing capabilities: Mill mixing, small to medium sized batches up to 2,000 lbs.

Capacity: 200,000 lbs./yr.

Tech service: yes

Recipe development: yes

J-Von

25 Litchfield St.

Leominster, MA 01453

508 537-4721

Fax: 508 537-4724

Equipment: 2-1/2" and 4-1/2" single screw extruders, 67 mm and 110 mm twin screw extruders, two 140 mm twin screws

Mixing capabilities: Styrenic block copolymers, TPEs, olefinic TPEs

Capacity: 35 million lbs./yr.

Tech service: yes

Recipe development: yes

Kardoes Rubber Co.

P.O. Box 350

1061 Lafayette Ind. Park

LaFayette, AL 36862

334 864-0777

Fax: 334 864-0776

Email: kardoesrubber@mindspring.com

Randy Kardoes, president

Equipment: S-268 mixer, 76" 4-roll calender and two 3700 mixers

Mixing capabilities: NR, SBR, CR, EPDM, NBR, PBD PBD - Programmer Brain Damage  and IR

Capacity: 200 million lbs./yr.

Tech service: yes

Recipe development: yes

Kirkhill Mfg. Company

12023 Woodruff Ave

Downey, CA 90241

562 803-1117

Fax: 562 803-3117

www.rubbersales.com

Email: ed@rubbersales.com

Pete Givens, John Doma, Ed Reker

Equipment: Internal mixer, mills, Barwells, full laboratory Services offered: Custom mixing and preforming

Mixing capabilities: All Polymers

Capacity: 85 million lbs.

Tech service: yes

Recipe development: yes

Divisions:

Athens Plant

215 Oneta St.

Athens, GA 30601

706 208-2966

Fax: 706-613-2232

Kleen Polymers, Inc.

145 Rainbow St.

Wadsworth, OH 44281

330 336-4212

Fax: 330 336-4405

www.kleenpolymers.com

Email: jcochran@kleenpolymers.com

John Marefka, president

Services offered: Compounding, mixing black, mixing colors, pelletizing

Laur Silicone, Inc.

4930 S. M-18

Beaverton, MI 48612-9181

989 435-7400

Fax: 989 435-7707

Email: laursilicone@laursilicone.com

Daniel T. Laur, president

Equipment: Mills, double arm mixers, preforming strainers Water lines or kitchen systems can get gravel, deposits that break free, and other stray items in the line. The velocity of the water pushing them, they can severely damage or clog devices installed in the flow stream of the water line. , calenders, liquid rubber mixing machine

Mixing capabilities: Exclusively silicone; all silicones including liquids

Capacity: 1.5 million lbs./yr.

Tech service: yes

Recipe development: yes

Lauren Manufacturing

2228 Reiser Ave. SE

New Philadelphia New Philadelphia, city (1990 pop. 15,698), seat of Tuscarawas co., E Ohio, on the Tuscarawas River, in a coal and clay area; founded 1804, inc. 1833. Foundry products, machinery, and pottery are made. The Tuscarawas Campus of Kent State Univ. is there. , OH 44663

330 339-3373

Fax: 330 339-1515

www.lauren.com

Equipment: Skinner/Shaw Intemesh K5 mixer

Services offered: Rubber compounding extrusion, molding and services, in-line straining and pelletizing of compounds

Mixing capabilities: Dense and sponge rubber sponge rubber
n.
A soft, porous rubber used in toys, cushions, gaskets, and weather stripping and as a vibration dampener.
, black and color compounds, converted strips for 20" to 1" wide

Capacity: 16-18 million lbs./yr.

Tech service: yes

Recipe development: yes

Divisions:

LMI LMI Labor Market Information
LMI Local Management Interface
LMI Logistics Management Institute
LMI Linear Matrix Inequality
LMI Legemiddelindustriforeningen (Norway)
LMI Low to Moderate Income
LMI Lender's Mortgage Insurance
 Custom Mixing, LLC

804 Byesville Rd.

Cambridge, OH 43725

740 435-0444

Fax: 740 435-0909

Jim Nixon, general manager; Carol Best, office manager

Equipment: Two internal mixers (intermesh), fully equipped development laboratory

Services offered: Custom mixing, straining, pelletizing, development

Mixing capabilities: Custom mixing

Capacity: 35 million lbs./yr.

Tech service: yes

Recipe development: yes

LMI Custom Mixing, LLC

804 Byesville Rd.

Cambridge, OH 43725

877 564-7822

Fax: 740 435-0909

www.lmimix.com

Email: info@lmimix.com

Equipment: Conveyors, extruders, liquid salt bath, mills, mixers, mixers--black, mixers--custom mixing, pelletizers, ribbon blenders, strainers

Services offered: Compounding, mixing black, mixing colors, pelletizing

Martin Rubber Co. of Ohio

9976 Rittman Rd.

Wadsworth, OH 44281

330 336-6604

Roger Turner This article is about the figure skater. For the garden designer, see Roger Turner (garden designer).

Roger Turner was an American figure skater. He was the seven time (1928–1934) U.S.
, president

Equipment: 3 mixers, 60" mills, 60" and 54" calenders, slitters, misc. specialty equipment

Mixing capabilities: All types except silicone and Viton

Capacity: 10 million lbs./yr.

Tech service: yes

Mid South Roller

200 Porter Industrial Rd.

Clarksville, AR 72830

479 754-6993

Fax: 479 754-3417

www.midsouthroller.com

Email: info@midsouthroller.com

Roy Johnson
    Roy Cleveland Johnson (February 23, 1903 - September 10, 1973) was a left fielder/right fielder in Major League Baseball who played for the Detroit Tigers (1929-32), Boston Red Sox (1932-35), New York Yankees (1936-37) and Boston Bees (1937-38).
    , president

    Equipment: Autoclaves, calenders, conveyors, curing ovens, extruders, grinders, knives, mills, mixers, polyurethane casting, roll building, rubber mill, spray equipment--thermal spray, trimmers, vulcanizers

    Services offered: Compounding, fabricating, grinding, milling, mixing colors, special services

    Momentive Performance Material

    420 N. Taylor Rd.

    P.O. Box 90

    Garrett, IN 46738

    219 357-6161

    Fax: 219 357-6165

    www.momentive.com

    Shane Lewis, vice president sales and marketing

    Equipment: Dough mixers, mills, extruders Mixing capabilities: Silicone elastomers

    Tech service: yes

    Recipe development: yes

    Mountville Rubber Inc.

    1602 Orchard Hill Rd.

    LaGrange, GA 30240

    800 448-8492

    706 298-0004

    Fax: 706 298-2994

    www.mountvillerubber.com

    Email: mcoffing@mountvillerubber.com

    Michael Coffing, sales manager

    Equipment: Color line--Skinner 268L with 15" in-line strainer; specialty color line--110 TMP TMP (thymidine monophosphate): see thymine.  tilt mixer with in-line strainer; black line--Skinner 268L

    Mixing capabilities: All elastomers with the exception of silicone

    Capacity: 100 million Ibs. (55,000,000 lbs. color and 45,000,000 lbs. black)

    Tech service: yes

    Recipe development: yes

    (see our ad on page 67)

    Muller Kunststoffe GmbH

    (a Hexpol Company)

    Max-Planck-Str. 3

    96215 Lichtenfels--Germany

    Tel: +49 95 71 94 89 4-0

    Fax: +49 95 71 94 89 4-90

    www.mueller-kunststoffe.com

    info@mueller-kunststoffe.com

    Natrochem Inc.

    P.O. Box 1205

    Savannah, GA 31402-1205

    912 236-4464

    Fax: 912 236-1919

    www.natrochem.com

    Email: agrady@natrochem.com

    Ann Grady

    Equipment: Two mixers, two reactors

    Mixing capabilities: Toll processing of dry liquid concentrates and blending operations

    Capacity: 20 tons per day

    Tech service: yes

    Recipe development: yes

    Pacesetter Graphic Service

    2672 Hickory Grove Hickory Grove may refer to several places in the United States:
    • Hickory Grove, Alabama
    • Hickory Grove, Arkansas
    • Hickory Grove, Illinois
    • Hickory Grove Township, Indiana
    • Hickory Grove, Iowa
    • Hickory Grove, Kentucky
    • Hickory Grove, Mississippi
     Rd.

    Acworth, GA 30102

    800 241-7970

    Fax: 770 975-3511

    Allen Thomason

    Mixing capabilities: Mostly nitrile

    Capacity: 1.8 million lbs./yr.

    Tech service: yes

    Recipe development: yes

    Pawling Corp.

    157 Charles Colman Blvd.

    Pawling, NY 12564-1188

    845 855-1000

    Fax: 845 855-1937

    www.pawling.com

    Email: jricket@pawling.com

    John Ricked, vice president/general manager

    Equipment: Two #11 mixers, #3 mixer, two 84" mills, 60" mill, 48" mill, dicer, three strainer/extruders, underwater pelletizing, peroxide absorbtion.

    Mixing capabilities: NR and SR

    Capacity: 40 million lbs./yr.

    Tech service: yes

    Recipe development: yes

    Pelmor Laboratories Inc.

    401 Lafayette St.

    P.O. Box 309

    Newtown, PA 18940

    215 968-3334

    Fax: 215 968-3676

    Email: sales@pelmor.com

    Paul White Paul White may refer to:
    • Paul White (Rugby League Footballer) plays for the Wakefield Trinity Wildcats
    • Paul White, Baron Hanningfield (b. 1940), British life peer
    • Paul Dudley White, a cardiologist
    • Paul White (missionary), the "Jungle Doctor"
    , sales manager

    Equipment: Clicking machines, coolers, deflashing equipment, dies, extruders, grinders, lathes, mills, mixers, molds, ovens, platens, compression molding Compression molding is a method of molding in which the molding material, generally preheated, is first placed in an open, heated mold cavity. The mold is closed with a top force or plug member, pressure is applied to force the material into contact with all mold areas, and heat  presses, injection molding presses, transfer molding presses, slitters, electronic autoclave autoclave

    Vessel, usually of steel, able to withstand high temperatures and pressures. The chemical industry uses various types of autoclaves in manufacturing dyes and in other chemical reactions requiring high pressures.
    , 1B mixer, roll mills

    Mixing capabilities: Generally all types, specializing in fluoroelastomers

    Capacity: 500,000 lbs./yr.

    Tech service: yes

    Recipe development: yes

    Performance Processing Company

    1517 Braden Ct.

    Orange, CA 92868

    714 771-2000

    Fax: 714 771-5850

    Equipment: F-80 internal mixer, 8 mills, calender, Barwell

    Mixing capabilities: Silicone and fluoroelastomers

    Tech service: yes

    Recipe development: yes

    Pinnacle Elastomeric Technology

    5272 Mountain Center Plaza

    Lula, GA 30554-2544

    770 967-4111

    Fax: 770 967-2100

    www.pinnacleelastomers.com

    Email: info@pinnacleelastomers.com

    Bobby Rathbun

    Equipment: Mixing mills

    Services offered: Fluoroelastomer and HNBR mixing

    Mixing capabilities: Open mill, slab, strip or cord

    Capacity: 2.4 million lbs./yr.

    Tech service: yes

    Recipe development: yes

    Polymerics, Inc.

    2828 Second St.

    Cuyahoga Falls, OH 44221

    330 928-2210

    Fax: 330 929-8819

    Joseph Arhar, president.; Tim Samples, vice president; Richard Strong, director

    sales; Roy Wagner
    for the cinematographer see Roy H. Wagner
    Roy Wagner is an cultural anthropologist specializing in symbolic anthropology. He received a BA from Harvard University (1961), and a Ph.D. from the University of Chicago (1966), where he studied under David M.
    , director purchasing

    Equipment: #9 mixer, #3 mixer, 60" mill, 84" mill, extruder

    Services offered: Custom rubber mixing, dispersions, chemical blends

    Mixing capabilities: Most polymers

    Capacity: 24 million lbs./yr.

    Tech service: yes

    Recipe development: yes

    Divisions:

    Polymers Inc. (Kent)

    1540 St. Clair Ave.

    Kent, OH 44240

    330 677-1131

    Fax: 330 677-0999

    Polymerics Rubber Jiangsu, Ltd.

    Zhengjiang, China

    PolyOne (Gayson SDI (1) (Serial Digital Interface) A physical interface widely used for transmitting digital video in various formats. For electrical transmission, it uses a high grade of coaxial cable and a single BNC connector with Teflon insulation. )

    30 Second St., SW

    Barberton, OH 44203

    330 848-9200

    Fax: 330 848-3411

    www.gayson.com

    Equipment: Mixer, 2-roll mills, 3-roll mills,

    Mixing capabilities: Silicone dispersions, colors, catalysts, additives; liquid

    silicone colors

    Capacity: 2 million lbs./yr.

    Tech service: yes

    Recipe development: yes

    Portage Precision Polymers, Inc.

    215 W. Lake St.

    Ravenna, OH 44266

    330 296-6327

    Fax: 330 296-6398

    www.pppmixing.com

    Email: rhartley@pppmixing.com

    Rick Hartley

    Equipment: F-270 internal mixer and 84" mill, No. 10 internal mixer and 84"

    mill, 60" mill-mixing line

    Services offered: Custom polymer mixing and compound development

    Mixing capabilities: EPDM, NBR, natural, SBR, PBD, polyisoprene, butyl,

    halobutyl, CSM, polycholoroprene, FKM, HNBR

    Capacity: 60 million lbs./yr.

    Tech service: yes

    Recipe development: yes

    (see our ad on page 51)

    PPD (1) (Parallel Presence Detect) The method used by earlier SIMM memory modules to communicate their capacity to the computer. A binary number coming from a parallel set of pins was read by the system, with each pin representing one bit. Contrast with SPD.  Rubtech

    400 Raymond

    Waterville, Quebec Waterville is a city of 1,800 people in southeastern Quebec, Canada, in the Coaticook Regional County Municipality. Waterville owes its existence to water-power, harnessed first by a sawmill (1810) and subsequently by several other industries. , Canada JOB 3H0

    819 837-2491

    Fax: 819 837-1095

    Email: sales@ppdgroup.com

    Equipment: Variable mixer, 6-wing mixer, variable mills, calender, preformer

    Mixing capabilities: All except silicone

    Capacity: 15 million kg/yr.

    Tech service: yes

    Recipe development: yes

    Preferred Compounding Corp.

    1020 Lambert St.

    Barberton, OH 44203

    330 798-4790

    Fax: 330 798-4795

    www.preferredperforms.com

    Email: joe.hudson@preferredperforms.com

    Joe Hudson, v.p. sales and marketing

    Equipment: Internal mixers, mills, extruders, gear pump strainers, calenders, cutters, cooling lines, full development and testing labs

    Services offered: Full technical service and recipe development

    Mixing capabilities: All polymers; black or color mixing; slab, strip, pellets or calendered

    Tech service: yes

    Recipe development: yes

    Divisions:

    Preferred Compounding, Barberton Plants

    1020 Lambert Rd.

    Barberton, OH 44203

    330 798-4790

    Fax: 330 798-4795

    Email: info@preferredperforms.com

    Andrew Chart, v.p. of manufacturing

    Equipment: #11 256 liter tangential mixer, #12 276.5 liter tangential mixer, 80 liter tangential mixer, mills, gear pump strainers, full analytical capabilities

    Services offered: Full technical service and recipe development

    Mixing capabilities: All polymers, black or color--separate buildings

    Preferred Compounding, Huntingdon Plant

    55 Associated Way

    Huntingdon, TN 38344

    731 986-2271

    Fax: 731 986-2273

    Email: info@preferredperforms.com

    Michael Magno, plant manager

    Equipment: F-270 Farrel tangential 256 liter mixer, #11 Farrel tangential 237 liter mixer, mills, cooling lines, full analytical capability

    Services offered: Full technical service and recipe development

    Mixing capabilities: All polymers, black

    Preferred Compounding, Tallapoosa Plants

    P.O. Box 245

    101 and 155 Stoffel Dr.

    Tallapoosa, GA 30176

    770 574-2321

    Fax: 770 574-5315

    Email: info@preferredperforms.com

    Mike Barker, plant manager

    Equipment: K-6 Shaw Intermesh 252 liter mixer, #11 Farrel tangential 237 liter mixer, #11 Kobelco 240 liter mixer, TMP 75 liter tilt mixer, mills, gear pump straining, two calenders including a 4-roll and full analytical capability

    Services offered: Full technical service and recipe development

    Mixing capabilities: All polymers, black or color--color in separate building

    Preferred Compounding,

    Fruithurst Plant

    165 Country Rd. 33

    Fruithurst, AL 36262

    770 574-2321

    Fax: 770 574-5315

    Email: info@preferredperforms.com

    David Brown David Brown may refer to any of the following people:
    • David Darnell Brown, an American rapper who goes by the name Young Buck, signed to G-Unit Records.
    • David McDowell Brown (1956–2003), American astronaut
    , plant foreman

    Equipment: Moriyama tilt 55 liter mixer

    Services offered: Full technical service and laboratory capabilities

    Mixing capabilities: All polymers

    R&S Processing Co., Inc.

    15712 Illinois Ave.

    Paramount, CA 90723

    562 531-1403

    Fax: 562 531-4318

    www.rsprocessing.com

    Email: dbesack@rsprocessing.com

    Dick Besack, president

    Equipment: #11 internal mixer, #9 internal mixer, 2 #4 internal mixers, 3 mills, color and black, sheeting, stripping, Barwell

    Services offered: Custom mixing, preforming Mixing capabilities: Internal, lab, open mill

    Capacity: 40 million lbs./yr.

    Tech service: yes

    Recipe development: yes

    Rainbow Mastermixing, LLC

    467 Dan St.

    Akron, OH 44310

    330 374-1810

    Fax: 330 374-1812

    www.rainbowmastermixing.com

    Email: tlowe@rainbowmastermixing.com

    Tim Lowe, general manager

    Equipment: 60" rubber mills, 42" rubber mill, ODRs, tensile, Mooney testers

    Services offered: Color matching, compounding

    Mixing capabilities: All types, specializing in fluoroelastomers

    Capacity: 1.5 million lbs./yr.

    Tech service: yes

    Recipe development: yes

    Reiss Manufacturing, Inc.

    1 Polymer Place

    P.O. Box 60

    Blackstone, VA 23824

    434 292-1600

    Fax: 434 292-1757

    www.reissmfg.com

    Email: reissmfg@reissmfg.com

    Allen Johnson

    For other people named Allen Johnson, see Allen Johnson (disambiguation).


    Allen K. Johnson (born March 1, 1971) is a hurdling athlete and won Olympic Gold in the 110 metre high hurdles at the 1996 games in Atlanta, Georgia.
    , sales and marketing

    Equipment: Internal mixer, mills, extruders, presses, calenders, clicker dies

    Services offered: Custom and standard formulating and mixing of silicone, fluorosilicone; molded compounds including silicone, Viton, fluorocarbon fluorocarbon /flu·o·ro·car·bon/ (floor´o-kahr?b?n) any of the class of organic compounds consisting of carbon and fluorine only.  and EPDM rubber EPDM rubber (ethylene propylene diene monomer rubber) is an elastomer which is characterized by wide range of applications. EPDM rubber is used in vibrators and seals; glass-run channel; radiator, garden and appliance hose; tubing; washers; belts; and electrical insulation. ; extruded profiles and tubings; calendered roll goods; laminates, die cut, splicing and other fabricated functions; molding by compression, injection, transfer and liquid injection; fabrication fabrication (fab´rikā´shn),
    n the construction or making of a restoration.
    ; solids, sponge and foams, lab testing, prototype design, in-house mold design and manufacturing.

    Tech service: yes

    Recipe development: yes

    Divisions:

    Ronsil Rubber Div.

    Blackstone, VA

    www.reissmfg.com

    Email: Reiss-Silicones@reissmfg.com

    Allen Johnson, sales and marketing mgr.

    Equipment: Mixers, mills, extruders, vaccum presses, compression molding, transfer molding, LIM molding, calendering, clicker dies, laminators, machine shop tool, die and mold build, fabricating equipment splicing, ovens, and more

    Services offered: Formulating to manufacturing finished custom rubber products.

    Mixing capabilities: Silicone, fluorosilicone extruded solid or sponge, molded or calendered sheet in silicone, fluorosilicone, fluorocarbon, Viton and EPDM rubber.

    Recipe development: Yes small to large preform pre·form  
    tr.v. pre·formed, pre·form·ing, pre·forms
    1. To shape or form beforehand.

    2. To determine the shape or form of beforehand.

    n.
    1.
     lots.

    Robbins LLC

    2306 S. Wilson Dam Wilson Dam: see Tennessee Valley Authority.  Hwy.

    Muscle Shoals Muscle Shoals, town (1990 pop. 9,611), Colbert co., NW Ala., on the Tennessee River opposite Florence; inc. 1923. Chemicals, truck trailers, and nuts, screws, and bolts are manufactured. , AL 35661

    800 633-3312

    Fax: 800 321-7918

    www.robbinsllc.com

    bconner@robbinsllc.com

    Billy Conner, business development manager.

    Equipment: Intermesh and tangential mixers, Krupp GK-250E, F370, F270, #12, #15, #11, 84" mill, 100" mill, 72" 4-roll calender, autoclaves, extruders, mills, mixers and presses

    Services offered: Custom formulations, full development and testing, color mixing, compounding, calendering, extrusion, molding and autoclave curing

    Mixing capabilities: All grades

    Capacity: 400 million lbs./yr.

    Tech service: yes

    Recipe development: yes

    Divisions: Tallapoosa, GA Plant 280 Pequannoc Dr. Tallapoosa, GA 30176 770 574-2341

    Muscle Shoals, AL Plant 3415 Thompson St. Muscle Shoals, AL 35661 800 633-3312 Findlay, OH Plant 1300 Morrical Blvd. Findlay, OH 45840 419 420-7300

    (see our ad on page 23)

    Shin-Etsu Silicones of America, Inc.

    1150 Damar Damar: see Dhamar, Yemen.  Dr.

    Akron, OH 44305 330 630-9460

    Fax: 330 630-2857

    www.shinetsusilicones.com

    Jim Agee, national sales manager; Tony Kondo, plant manager

    Equipment: Dough mixers, internal mixer, dispersion mixers, open 2-roll mills,

    extruders

    Services offered: Custom compounder of silicone HLR (Home Location Register) A database in a cellular system that contains all the subscribers within the provider's home service area. When a subscriber reaches a new service area, the data in the HLR is requested and transferred via SS7 to the VLR (Visitor Location  

    Mixing capabilities: Silicone

    Tech service: yes

    Recipe development: yes

    Silmix--California

    Division of Wacker Chemical

    13910 Oaks Ave.

    Chino Chino (chē`nō), city (1990 pop. 59,682), San Bernardino co., S Calif.; founded 1887, inc. 1910. It is the business and processing center of a diversified farming (notably dairying) area. , CA 91710

    909 590-8822

    Fax: 909 627-2926

    www.wacker.com/silmix

    Email: info.silmix-ca@wacker.com

    Kim Liberato, director

    Equipment: Mills, extruders, calenders, internal mixer

    Services offered: Compound development and custom mixing

    Mixing capabilities: Silicone and fluorosilicone

    Tech service: yes

    Recipe development: yes

    Silmix--Ohio

    A Div A DIV Associate of Divinity . of Wacker Chemical Corp.

    2215 International Pkwy.

    North Canton North Canton, city (1990 pop. 14,748), Stark co., NE Ohio, a suburb of Canton; settled c.1815, inc. as a city 1961. Vacuum cleaners and industrial die castings are among the city's manufactures. , OH 44720

    330 628-5017

    Fax: 517 264-1628

    www.wacker.com/silmix-usa

    Email: ken.kemerer@wacker.com

    Kenneth G. Kemerer

    Equipment: Mills, extruders, calenders, internal mixers

    Services offered: Silicone compound development and custom mixing

    Mixing capabilities: Silicone and fluorosilicone

    Tech service: yes

    Recipe development: yes

    (see our ad on page 15)

    Solar Compounds Corp.

    1201 W. Blancke St.

    Linden, NJ 07036

    908 862-2813

    Fax: 908 862-8061

    www.solarcompounds.com

    Email: sales@solarcompounds.com

    Services offered: Mixing and compounding, formulation development and

    manufacture

    Mixing capabilities: High speed and shear, low-speed, solids and caulks

    Capacity: 10 million+

    Tech service: yes

    Recipe development: yes

    Soucy Techno Inc.

    2550 St-Roch Rd, South

    Sherbrooke, Quebec, Canada J1N 2R6

    819 864-4284

    Fax: 819 864-6352

    www.soucygroup.com

    Email: andre.archambault@soucy-group.com

    Andre Archambault

    Equipment: Mixers, extruders and calender

    Services offered: Mixing, calendering, preforming, compounding

    Mixing capabilities: Most elastomers

    Capacity: Rubber: 30 million lbs./yr., plastic: 30 million lbs./yr.

    Tech service: yes

    Recipe development: yes

    Specialized Technology Resources

    10 Water St.

    Enfield, CT 06082

    860 749-8371

    877 str-labs

    Fax: 860 749-8234

    www.strlab.com

    Email: strsales@strus.com

    Equipment: Mixers, mills, extruders, pelletizers, full lab, injection molding

    and testing services

    Mixing capabilities: Most elastomers and polymeric compounds including

    thermosets

    Capacity: Lab scale--up to 100 lbs./per compound

    Tech service: yes

    Recipe development: yes

    Specialty Products & Polymers, Inc.

    2100 Progressive Dr.

    Niles, MI 46120

    269 684-5931

    Fx: 269 684-5811

    www.specialtyproductspolymers.com

    Specialty Silicone Products, Inc.

    Corporate Technology Park

    3 McCrea Hill Rd.

    Ballston Spa, NY 12020

    800 437-1442

    518 885-8826

    Fax: 518 885-4682

    www.sspinc.com

    Email: cservice@sspinc.com

    Randy Putnam

    Equipment: Mixers, CAD/CAM/mold making, extruders, mills, calenders, die cutting, LSR equipment, robotics

    Mixing capabilities: Mixing, molding, injection molding, gasketing

    Capacity: 75 million lbs./yr.

    Tech service: yes

    Recipe development: yes

    Standard Rubber Products

    S&D Rubber Co., Division

    P.O. Box 1157

    W. Hanover, MA 02339-7157

    617 878-2626

    John Davis, president

    Equipment: Three #9 mixers, two mix mills (60" and 84"), two strainers (4" and

    8"), #11 mixer

    Mixing capabilities: All polymers

    Capacity: 15 million lbs./yr.

    Tech service: yes

    Recipe development: yes

    Teknor Apex Company

    505 Central Ave.

    Pawtucket, RI 02861

    401 725-8000

    Fax: 401 728-1051

    www.teknorapex.com

    Email: rubber@teknorapex.com

    Andy Claytor

    Equipment: Mills, mixers, roller die, in line die cutting, strainer, flat platen presses

    Mixing capabilities: All non-black elastomers except silicone and fluoroelastomers

    Tech service: yes

    Recipe development: yes

    Divisions:

    Haywood Company Div.

    751 Dupree St.

    Brownsville, TN 38012

    731 772-3690

    Fax: 731 772-6309

    Trostel Polymer Compounding Div.

    736 Executive Dr.

    Whitewater, WI 53190

    262 472-6612

    803 345-7306

    Fax: 262 473-6966

    www.trostelpcd.com

    Email: Szymborski@trostel.com

    Mike Szymborski, sales manager

    Equipment: K-5 Intermix in·ter·mix  
    tr. & intr.v. in·ter·mixed, in·ter·mix·ing, in·ter·mix·es
    To mix or become mixed together.



    [Back-formation from obsolete intermixt, from Latin
    , internal mixer, coldfeed extruder/cutter

    Mixing capabilities: Custom rubber mixing, rubber preforming

    Tech service: yes

    Recipe development: yes

    (see our ad on page 58)

    Truseal Technologies Ltd.

    55 Esandar Dr.

    Toronto, Ontario, Canada M4G 4H2

    416 425-5570

    Fax: 416 425-7299

    Email: melo@truseal.com

    Equipment: Mixers, mills, ribbon

    Mixing capabilities: Most elastomers

    Tech service: yes

    U.S. Silicones L.L.C.

    3103 Cannongate Dr.

    Fort Wayne Fort Wayne, city (1990 pop. 173,072), seat of Allen co., NE Ind., where the St. Joseph and St. Marys rivers join to form the Maumee River; inc. 1840. It is the second largest city in the state, a major railroad and shipping point, a wholesale and distribution hub, , IN 53190

    888 480-0171

    www.ussilicones.com

    Email: gwallen@ussilicones.com

    Greg Wallen, general mgr.

    Valley Processing

    Div. Of Mitchell Rubber Products

    491 Wilson Way

    City of Industry, CA 91741

    626 961-0311

    Fax: 626 968-2026

    www.rubberworld.com/valleyprocessing

    Email: sh@mprvalleyprocessing.com

    Sy Hasan, vice president sales, technical service.; Kevin Sarcon, sales manager,

    technical service

    Equipment: Two #11 internal mixers, #12 Boiling, #4 Boiling (non black), 66" 4-roll calender, 60" 3-roll calender, preformer, strainer, extruders

    Services offered: Custom rubber compounding, mixing

    Mixing capabilities: All solid polymer (thermoset A polymer-based liquid or powder that becomes solid when heated, placed under pressure, treated with a chemical or via radiation. The curing process creates a chemical bond that, unlike a thermoplastic, prevents the material from being remelted. See thermoplastic. ), all colors

    Capacity: 112 million lbs./yr.

    Tech service: yes

    Recipe development: yes

    (see our ad on page 10)

    Valley Rubber Mixing, Inc.

    520 S. Main St., Ste. 2445

    Akron, OH 44311

    330 434-4442

    Fax: 330 258-2016

    www.valleyrubber.com

    Email: denniss@valleyrubber.com

    Dennis Salswimmer, vice president.; James Berresford, president; Derek Berresford, vice president, Glo-Mold; John Allen John Allen may refer to:

    Artists

    • John Allen (guitarist), member of The Nashville Teens
    • John Allen (Australian TV actor), appearing in such TV shows as All Saints and Water Rats

    Politicians

    • John Allen (Connecticut) (1763–1812), U.S.
    , technical sales

    Equipment: 60" mill, 84" mill and #3 internal mixer for black compounds; 60" mill, 84" mill, #4 mixer, 66" calender and 48" calender for all colors

    Mixing capabilities: All polymers, all colors, most blacks, except silicone

    Capacity: 25 million lbs.

    Tech service: yes

    Recipe development: yes

    Viceroy Rubber & Plastics Ltd.

    1655 DuPont St.

    Toronto, Ontario, Canada M6P M6P Mannose-6-Phosphate  3T1

    416 762-1111

    Fax: 416 762-0889

    Email: info@viceroyrubber.com

    Equipment: Mixers, calender, autoclaves, mills, hydraulic compression presses

    Mixing capabilities: Most elastomers

    Tech service: yes

    Recipe development: yes

    Vulcan Corporation Vulcan Corporation is a materials manufacturer that specializes in rubber, plastics, foam products, and bowling pins. Vulcan Corporation is a wholly owned subsidiary of Vulcan International Corporation, based in Wilmington, Delaware.  

    1151 College St.

    Clarksville, TN 37040

    800 251-3415

    Fax: 931 647-0789

    www.vulcorp.com

    Email: vulcorp@bellsouth.net

    Equipment: Mixers, mills, calender, sheet presses, sanders, splitters

    Services offered: Vulcanized rubber India rubber, vulcanized.
    - Knight.

    See also: Vulcanize
     sheeting and custom mixing, EVA and PE foams

    Mixing capabilities: Most elastomers

    Recipe development: yes

    Wayne County Rubber, Inc.

    1205 E. Bowman St.

    Wooster, OH 44691

    330 264-5553

    Fax: 330 262-7274

    www.waynecountyrubber.com

    Email: laurie @waynecountyrubber.com

    Laurie Schang

    Equipment. #11 internal mixers, 3-roll calenders, 4-roll calender, 45", 60" and

    4 84" mills, slitter

    Mixing capabilities: All elastomers

    Tech service: yes

    Recipe development: yes

    Custom Services

    Abrasive Supply Company, Inc.

    25240 State Route 172

    Minerva, OH 44657

    330 894-2818

    Fax: 330 894-2626

    Email: sales@polyblast.com

    Rob Rouse

    Equipment: Cryogenic and ambient deflashing/deburring/tumbling machine, blast cabinets, both manual and automatic

    Services offered: Deflashing, deburring, tumbling

    ACM Corporation

    217 Industrial Rd.

    Summerville, SC 29483

    803 821-1888

    Rick Moore, president

    Equipment: Grinders--ambient and cryogenic, granulators, bale granulators and grinders, and sizing equipment Mixing capabilities: Granulating and grinding of vulcanized and unvulcanized polymers from 1" down to 100 mesh

    Capacity: 35 million lbs.

    Tech service: yes

    Recipe development: yes

    Adams/Renosol, LLC

    1512 Woodland Dr.

    Saline, MI 48176

    734 944-4655

    Fax: 734 944-5615

    www.adams-renosol.com

    Email: info@adams-renosol.com

    Equipment: Vinyl plastisol blending, tinting and testing equipment

    Services offered: Custom formulation and tinting, manufacture and delivery

    Tech service: yes

    Recipe development: yes

    Adhesive Consultants, Inc.

    383 Stanton Ave

    Akron, OH 44301 877 773-9233

    Fax: 330 773-9164

    www.adhesivesconsultants.com

    Email: info@adhesivesconsultants.com

    Jeffrey Noss, president

    Mixing capabilities: Consultants and testing services for the adhesive industry

    Recipe development: yes

    Akron Dispersions, Inc.

    3291 Sawmill sawmill, installation or facility in which cut logs are sawed into standard-sized boards and timbers. The saws used in such an installation are generally of three types: the circular saw, which consists of a disk with teeth around its edge; the band saw, which  Rd.

    P.O. Box 4195

    Akron, OH 44321

    330 666-0045

    800 664-1455

    Fax: 330 666-7842

    Email: sales@akrondispersions.com

    James C. Finn, president

    Services offered: Aqueous dispersions and emulsions, chemical grinding, dry

    liquid dispersions

    Tech service: yes

    Recipe development: yes

    APV Engineered Coatings

    1390 Firestone Pkwy.

    Akron, OH 44301 330 773-8911

    Fax: 330 773-1028

    Email: sales@apvcoatings.com

    Michael Corichie

    Equipment: 140 different grinding, mixing and blending pieces of equipment

    Services offered: Cement compounding, rubber marking inks, lubes/release agents, full range of water-based products, contract manufacturing and packaging

    Mixing capabilities: Batch sizes from one gallon to 6,000, viscosities ranging from 50 cps to 3,000,000

    Tech service: yes

    Recipe development: yes

    Akros/Douglas

    677 W. Turkeyfoot Lake Rd.

    Akron, OH 44319

    330 645-9066

    Fax: 330 245-1762

    Email: akrosball@aol.com

    Nolan Douglas

    Services offered: Compound design

    Tech service: yes

    Recipe development: yes

    Aldon Corporation

    221 Rochester St.

    Avon, NY 14414

    800 724-9877

    Fax: 585 226-6177

    www.aldon-chem.com

    Email: info@aldon-chem.com

    Services offered: Carbon black re-packing, either into smaller sizes or into

    super sacks

    Capacity: 1 million lbs./yr.

    All-Tra Rubber Processing

    154B Potomac Ave.

    Tallmadge, OH 44278

    330 630-1945

    Fax: 330 630-1143

    Equipment: Computer controlled preformer, take-off and cooling system, coating equipment, mills, chillers, etc.

    Services offered: Custom preforms for compression molding, pellets, extrusion

    Tech service: yes

    Recipe development: yes

    Bedell-Kraus Flexographic Rubber

    1350 Commerce Dr.

    Stow, OH 44224

    330 688-4881

    Fax: 330 688-3324

    Email: awk@bedellkraus.com

    Equipment: 60" mix mills, 3 calenders

    Services offered: Custom mixing services, custom calendering, die cutting, flame proofing of fabrics, saturating and waterproofing of fabrics, cured sheet rubber, slitting, press curing

    Tech service: yes

    Recipe development: yes

    Caloric caloric /ca·lo·ric/ (kah-lor´ik) pertaining to heat or to calories.

    ca·lor·ic
    adj.
    1. Of or relating to calories.

    2. Of or relating to heat.
     Color Co.

    176 Saddle River Ave.

    Garfield, NJ 07026

    973 471-4748

    Fax: 973 471-4748

    Services offered: Manufacturing dispersions for wire and cable tubing, Tefzel striping Interleaving or multiplexing data to increase speed. See disk striping.

    striping - data striping
     ink, TFE TFE Tetrafluoroethylene
    TFE Travail de Fin d'Études (Belgium)
    TFE Totalfinaelf (Oil and Gas)
    TFE Trifluoroethanol
    TFE Thin Film Electronics
    TFE 2,2,2-Trifluoroethanol
    , FEP See front end processor. , inks

    Chemsultants, Inc.

    9079 Tyler Blvd.

    Mentor, OH 44060

    440 974-3080

    Fax: 440 974-3081

    www.adhesiveconsultants.com

    Email: info@adhesivesconsultants.com

    Services offered: Consultants and testing services for the adhesive industry

    Recipe development: yes

    The Crislip Corporation

    8096 Hartman Rd.

    Wadsworth, OH 44281

    330 435 6381

    Fax: 330 435 4869

    Duaine L. Crislip, Jr., president

    Equipment: Mills, calenders, autoclaves, air compressors, sand blasting

    equipment

    Services offered: Tank lining and tank lining applicator ap·pli·ca·tor
    n.
    An instrument for applying something, such as a medication.


    applicator,
    n a device for applying medication; usually a slender rod of glass or wood, used with a pledget of cotton on the end.
     rubber

    Cryogenic Deflashing Systems, Inc.

    1701 E. Edinger Ave., Bldg. G-2

    Santa Ana, CA 92705

    714 564-1020

    Fax: 714 564-1025

    www.cryogenicdeflashingsystems.com

    cryogenicdeflashingsystemsinc@msn.com

    Ruben Mendez, president

    Equipment: Cryogenic deflashing and deburring machines

    Services offered: Deflashing all different materials of rubber, plastic and metals, deburring, polishing of elastomer parts

    Capacity: 35 million Ibs.

    Tech service: yes

    Recipe development: yes

    CSI CSI Crime Scene Investigator
    CSI CompuServe, Inc.
    CSI Commodity Systems, Inc.
    CSI Commodity Systems Inc. (Boca Raton, FL)
    CSI Crime Scene Investigation (CBS TV show)
    CSI Christian Schools International
     Calendering, Inc.

    1120 Commercial Blvd. N.

    Arlington, TX 76001

    817 467-1200

    Fax: 817 468-0963

    www.csicalendering.com

    Email: terrygoetz@csicalendering.com

    Terry Goetz, national sales manager

    Equipment: Three 3-roll calenders, mills, duster, slitter, laminator.

    Services offered: Specialist in calendering tire cords, Kevlar, fabrics, skim coating, friction coating and sheet stock; can calender widths up to 78 inches; slitting, dusting, laminating and cold room storage; product developement

    Mixing capabilities: Outsourced

    Tech service: yes

    Dura Undercushions Ltd.

    8525 Delmeade Rd.

    Montreal, Quebec, Canada H4T 1M1

    514 737-6561

    800 295-4126

    Fax: 514 342-7940

    www.duracushion.com

    Email: info@dura-undercushions.com

    Yves Boudreau, general manager

    Equipment: Grinders, curing oven

    Services offered: 30 mesh rubber, under padding, acoustical and sound control

    underlayment

    Elastomer Processing Corp. Div.

    Rotation Dynamics Corp.

    2448 W. 24th St.

    Chicago, IL 60608

    773 254-4039

    Fax: 773 254-6768

    Equipment: #9 mixer, 84" mill, five 60" mills, 60" calender, 50" calender,

    extruders

    Services offered: Custom rubber mixing

    Mixing capabilities: All types excluding silicone

    Capacity: 10 million lbs./yr.

    Tech service: yes

    Recipe development: yes

    Divisions:

    EPG/Kansas City Plant

    2035 Washington St.

    Kansas City, MO 64108

    816 842-7377

    Fax: 816 471-0958

    Robert L. Peterson, manager

    Entropex

    1390 Lougar Ave.

    Sarnia, Ontario, Canada N7S 5N7

    519 332-0430

    Fax: 519 332-8220

    Derek Smith, president

    Services offered: Reprocessing, dewatering

    Goldsmith & Eggleton, Inc.

    300 First St.

    Wadsworth, OH 44281-2084

    330 336-6616

    Fax: 330 334-4709

    www.goldsmith-eggleton.com

    Email: eggleton@goldsmith-eggleton.com

    Rob Eggleton, vice president sales and marketing

    Equipment: Internal mixers, extruder dryers, pelletizing extruder

    Services offered: Reprocessing of elastomers, custom blending and pelletizing of

    elastomers

    Mixing capabilities: Proprietary masterbatches, custom masterbatches, preforms,

    slabs, strips, masterbatching to industry standard

    Capacity: 65-70 million lbs./yr.

    Tech service: yes

    Recipe development: yes

    (see our ad on page 65)

    Great Lakes Rubber Co.

    30573 Beck Rd.

    P.O. Box 931099

    Wixom, MI 48393

    248 624-5710

    Fax: 248 624-4770

    www.greatlakesrubberco.com

    Email: don.demallie@macvalves.com

    Don DeMallie

    Equipment: Mixer, 48" mills, compression, transfer and injection presses, form grinders, trim lathes cryogenic deflasher

    Services offered: Compounding, mixing, rubber testing, bonding rubber to metal, grinding, cryogenic deflashing

    Tech service: yes

    Recipe development: yes

    Hiawatha Rubber Co.

    1700 67th Ave. North

    Minneapolis, MN 55430

    763 566-0900

    Fax: 763 566-9537

    www.hiawatharubber.com

    Email: sales@hiawatharubber.com

    Donna Zroka, sales manager

    Equipment: 30 molding presses (including injection press), up to 42" x 42" platen, robotic CNC grinding, cylindrical grinding, three 60" mills, cryogenic deflasher, eight manufacturing cells

    Services offered: Custom molded precision rubber rollers and rubber-to-metal bonded rubber parts and all rubber parts

    Tech service: yes

    Recipe development: yes

    Hope Webbing Company

    50 Martin St.

    Cumberland, RI 02864

    401 723-2800

    Fax: 401 334-6441

    Email: hopesales@aol.com

    Thomas Miller

    Mixing capabilities: Color matched pile fabric for weatherstrips; Form-A-Grip wire carrier insert for rubber and vinyl weatherstrip; polyester and Teflon sleevings for reinforcements

    Infinity Rubber Technology Group

    170 North Queens St.

    Toronto, Ontario, Canada M9C 1A8

    416 626-0700

    800 565-5875

    Fax: 416 626-5156; 800 561-9657

    www.infinityrubber.com

    Tom Lennox, vice president sales and marketing

    Services offered: Custom rubber mixing (black and colors), calender capabilities (both supported and unsupported goods), technical support, custom compounding and development

    Tech service: yes

    Recipe development: yes

    JohnPac, Inc.

    1860 Highway 90 W.

    Crowley, LA 70526 337 783-5466

    Fax: 337 783-2247

    www.johnpac.com

    Email: mehenry@johnpac.com

    Alan Boulet

    Services offered: Industrial packaging, manufacturing pp woven products

    Littlern Corporation

    77 Second St. SW

    Barberton, OH 44203

    330 848-8847

    Fax: 330 848-8947

    www.littlern.com

    Email: info@littlern.com

    Ernie Puskas

    Equipment: Powder blenders, grinding, crushing and packaging equipment

    Services offered: Blending, grinding and packaging of additive chemicals. Custom

    processing services

    Tech service: yes

    Recipe development: yes

    LRB LRB London Review of Books
    LRB Legislative Reference Bureau
    LRB Labor Relations Board
    LRB Little River Band
    LRB Lonesome River Band
    LRB Liquid Rocket Booster
    LRB License Review Board
    LRB Lightning Rod Ball
    LRB Laboratory of Radiation Biology
     Enterprises

    220 Sacramento St., Ste. 1106

    San Francisco, CA 94115-2309

    415 931-3381

    Fax: 415 929-8123

    Email: sales@LBRenterprises.com

    Larry Barnblatt

    Equipment: Shredders, grinders, granulators, fiber separation equipment, debeaders, screening systems, devulcanization equipment

    Services offered: Complete recycling services and support, designs and installation

    Tech service: yes

    Mesabi Control Engineering, Ltd.

    1350 Arcade St.

    St. Paul, MN 55106

    651 771-1890

    Fax: 651 771-0437

    John J. Beaudoin, systems product manager

    Mixing capabilities: Mixing systems

    (See our ad on page 64)

    Midwest Elastomers, Inc.

    700 Industrial Dr.

    P.O. Box 412

    Wapakoneta, OH 45895

    419 738-8844

    877 786-3539

    Fax: 419 738-7647

    www.midwestelastomers.com

    Email: epiland@midwestelastomers.com

    Evan Piland, sales manager, Industrial Rubber Division

    Services offered: Cryogenic and ambient grinding of post industrial scrap rubber which has been crosslinked and cured; 10-120 mesh ASTM ASTM
    abbr.
    American Society for Testing and Materials
     D-5644; size reduction of uncured rubber; toll grinding of plastics; ISO (1) See ISO speed.

    (2) (International Organization for Standardization, Geneva, Switzerland, www.iso.ch) An organization that sets international standards, founded in 1946. The U.S. member body is ANSI.
     9001:2000

    Tech service: yes

    Mocap Custom Molding Group

    13100 Manchester Rd.

    St. Louis, MO 63131

    314 543-4141

    800 817 8784

    Fax: 314 543-4111

    www.mocapcmg.com

    Email: sales@mocapcmg.com

    Equipment: Vinyl dip molding, rubber injection, rubber compression, insert molding, plastic injection, tube extrusion, silicone tape extrusion and printing Services offered: Proprietary and custom products

    Tech service: yes

    Recipe development: yes

    National Rubber Corp.

    2669 Industrial Blvd

    Bethel Park, PA 15102

    412 831-6100

    Fax: 412 831-6300

    www.nationalrubber.com

    Email: natrubber@aol.com

    Equipment: Extruder, curing line, mixer, open mixing mill, press, vulcanizer, post-cure oven, cutter, puller, clicker press, die cutting, punching equipment, lab Services offered: Extruded, molded, die cut, rubber to metal bonded parts and secondary fabrication

    Capacity: 3,000 lbs./day

    Tech service: yes

    Recipe development: yes

    Natrochem, Inc.

    P.O. Box 1205

    Savannah, GA 31402-1205

    912 236-4464

    Fax: 912 236-1919

    www.natrochem.com

    Email: agrady@natrochem.com

    Ann Grady

    Equipment: Two mixers, two reactors

    Mixing capabilities: Toll processing of dry liquid concentrates and blending

    operations

    Capacity: 20 tons/day

    Tech service: yes

    Recipe development: yes

    Passaic Rubber Co.

    45 Demarest Dr.

    P.O. Box 505

    Wayne, NJ 07474-0505

    973 696-9500

    Fax: 973 696-0686

    www.passaic.com

    Email: answers@passaic.com

    J.D Mathey, president

    Equipment: Calenders, mills, fabric dryers, slitters, extruders, lathes,

    presses, vulcanizers, shot blaster

    Services offered: Calendering rubber and coating fabrics, slitting and converting, rubber rollers, endless belting, tank lining, shot blasting, press molding, contract manufacturing, private labeling

    Mixing capabilities: None

    Capacity: Significant

    Tech service: yes

    Patterson Rubber Products, LLC

    45 Demarest Dr., 2nd Floor

    Wayne, NJ 07474 973 305-0028

    Fax: 973 305-0067

    Email: jeff@passiac.com

    Jeff Leach

    Equipment: Vulcanizers, sandblast sandblast, stream of sand or other abrasive particles driven by a jet of compressed air or water or by centrifugal force against a surface to clean or abrade it.  equipment, lathes

    Mixing capabilities: Tank and barrel lining, rollers

    Tech service: yes

    Recipe development: yes

    Bill Peltzman and Associates, Inc.

    7157 S, Owens St,

    Littleton, CO 80127

    303 933-0317

    Fax: 303 933-7089

    Email: wpeltzman@prodigy.net

    Bill Peltzman, president

    Services offered: Textile adhesion consulting and failure analysis, RFL RFL Relay For Life (American Cancer Society fundraiser)
    RFL Rugby Football League (UK)
    RFL Robot Fighting League
    RFL Refuel
    RFL Resorcinol-Formaldehyde-Latex
     adhesive

    Tech service: yes

    Recipe development: yes

    PolyGel

    30 Leslie Ct.

    Whippany, NJ 07981

    973 884-3300

    Fax: 973 884-1331

    Email: larryk@polygel.com

    Equipment: Toll compounding equipment Services offered: Compounding of

    TPE/viscoelastic gels

    Capacity: 1 million/yr.

    Tech service: yes

    Recipe development: yes

    Polymer Valley Chemicals

    1872 Akron Peninsula Rd.

    Akron, OH 44313-9100

    330 945-6499

    Fax: 330 945-6488

    www.polymervalleychemicals.com

    Michael R. Beck

    Equipment: Custom treating and coating, bagging equipment

    Services offered: Custom treating and coating, custom bagging of mineral fillers and carbon blacks

    Tech service: yes

    (See our ad on page 9)

    Ponn Machine Cutting Co.

    20A Cross St.

    Woburn, MA 01801

    781 937-3373

    Fax: 781 937-0372

    www.rubberfabrication.com

    Email: mark@ponnmachine.com

    Mark Pellicio

    Equipment: Punch presses, precos, tube slicers, waterjets, clickers, machine

    shop

    Services offered: Die cutting, lathe lathe (lāth), machine tool for holding and turning metal, wood, plastic, or other material against a cutting tool to form a cylindrical product or part. It also drills, bores, polishes, grinds, makes threads, and performs other operations.  cutting, custom gaskets, waterjet cutting

    Tech service: yes

    Procex Ltd.

    880 Cherry St.

    P.O. Box 628

    Kent, OH 44240

    330 673-1114

    Fax: 330 673-1115

    www.procexltd.com

    Services offered: Strip coating, urethane, rubber from variety of substrates

    R.B.S.

    12 Hodio Dr.

    Ansonia, CT 06401-2644

    203 735-3550

    Walter A. Mierzejewski

    Equipment: Grinding mill and calender rolls

    Services offered: On site roll blocking

    Renosol Corporation

    1512 Woodland Dr

    Saline, MI 48176

    734 557-3814

    Fax: 734 429-5351

    www.renosol.com

    Email: info@renosol.com

    Bethany Freeland, marketing manager

    Equipment: Plastisol compounding/mixing equipment

    Services offered: Custom formulation and blending, color matching, tolling

    Tech service: yes

    Recipe development: yes

    Rondy & Company

    255 Wooster Rd. N.

    Barberton, OH 44203

    330 745-9016

    Fax: 330 745-4886

    www.rondy.net

    Email: bmclaren@rondy.net

    Services offered: Repelletizing, custom grinding, molding and mixing

    Mixing capabilities: Internal mixer and mill mixing

    Tech service: yes

    Recipe development: yes

    Divisions:

    Rondy & Company

    584 Highway 28

    Abbeville, SC 29620

    864 459-9613

    Sage Automation

    4925 Fannet Rd.

    Beaumont, TX 77705

    409 842-8040

    Fax: 409 842-9141

    www.sagerobot.com

    Email: rodney@sagerobot.com

    Rodney Gonzalez

    Equipment: Fanuc robotic bale loading, gantry Gantry
    A name for the couch or table used in a CT scan. The patient lies on the gantry while it slides into the x-ray scanner portion.

    Mentioned in: Computed Tomography Scans
     robots, mechanical handling, bale resizers, film wrappers, dryer bed spreaders, arms and conveyors

    Services offered: Project management, system design, integration, manufacturing and service, upgrades, overhauls and PM programs.

    Salem-Republic Rubber Co.

    475 W. California Ave.

    Sebring, OH 44672

    800 686-4199

    Fax: 330 938-9809

    www.salem-republic.com

    Email: jdunchuck@salem-republic.com

    Drew Ney, president; Don McCaughtry, vice president operations; James Dunchuck,

    vice president sales and marketing

    Equipment: Processing machinery and equipment, mills, extruders, calenders, cutting equipment, dryers, hose-making machinery, lathes, vulcanizers

    Services offered: Hand and machine-made hose, uncured custom calendered rubber, jet starter hose, uncured tank lining materials

    Capacity: 2.5 million lbs.

    Tech service: yes

    Recipe development: yes

    Sparton Enterprises, Inc.

    3717 Clark Mill Rd.

    Barberton, OH 44203

    330 745-6088

    Fax: 330 745-5862

    Email: rkitchen@serubber.com

    Rob Kitchen, sales

    Equipment: Grinders, granulators, sifters and sizing equipment

    Services offered: Rubber grinding, granulating, recycling

    Specialized Technology Resources

    10 Water St.

    Enfield, CT 06082

    860 749-8371

    877 str-labs

    Fax: 860 749-7533

    www.strlab.com

    Email: ellen.bemben@strus.com

    Equipment: Mixers, mills, extruders, pelletizers, full lab, injection molding

    and testing services

    Services offered: Laboratory scale formulating and compounding services

    Capacity: 100 lbs./per compound

    Tech service: yes

    Recipe development: yes

    The Rubberhouse, LLC

    29 Mount Sumner Dr.

    Bolton, CT, 06043-7231

    860 646-3012

    Fax: 860 760-6210

    www.rubberhouse.com

    Email: dave@rubberhouse.com

    David Maidment, owner

    Services offered: Surface treatment masking, custom rubber products, aerospace,

    commercial

    Tech service: yes

    Trostel, Ltd.

    736 Executive Dr.

    Whitewater, WI 53190

    262 472-6612

    Fax: 262 473-6966

    Email: szymborski@trostel.com

    Mike Szymborski

    Equipment: K-5 Intermix, internal mixer, coldfeed extruder/cutter

    Mixing capabilities: Custom rubber mixing, rubber preforming

    Tech service: yes

    Recipe development: yes

    (See our ad on page 59)

    Valpac, Inc.

    1400 Industrial Park Rd.

    Federalsburg, MD 21632

    410 754-7390

    Fax: 410 754-7541

    www.valpac.com

    Email: frank@valpac.com

    Frank Jennings

    Services offered: Formulating, pigmenting, contract/toll manufacturing, equipment high/low speed dispersing, formulating, compounding, low speed mixing, high speed dispersing, pigmenting, homogenizing, granulating, experience in water, solvent and 100% solids chemistries

    Capacity: 20 million lbs.

    Tech service: yes

    Recipe development: yes

    Vulcan Corp.

    1151 College St.

    Clarksville, TN 37040

    800 251-3415

    Fax: 931 647-0789

    www.vulcorp.com

    Email: vulcorp@bellsouth.net

    Willis Kean

    Equipment: Mixers, mills, calender, sheet presses, sanders, splitters

    Services offered: Vulcanized rubber sheeting and custom mixing, EVA and PE

    foams; mixing capabilities, most elastomers

    Recipe development: yes

    Wedco, Inc.

    5355 Farm Bureau Rd.

    Allentown, PA 18105-9253

    Services offered: Size-reduction of thermoplastic elastomers and other plastics to fine particle sizes, also manufactures size-reduction systems and equipment

    Capacity: 150,000 metric tons

    West American Rubber LLC

    1413 Braden Ct.

    Orange, CA 92868

    714 532-3355

    Fax: 714 774-2238

    www.warco.com

    Email: Igonzalez@worldnet.att.net

    Louis Gonzalez, inside sales manager

    Services offered: Complete laboratory including compound development and casting, calendering, cold and hot feed extrusion lines, microwave extrusion, splice, compression, transfer and injection molding with rubber-to-metal bonding

    Capacity: 24 million lbs./yr.

    Tech service: yes

    Recipe development: yes
    COPYRIGHT 2012 Lippincott & Peto, Inc.
    No portion of this article can be reproduced without the express written permission from the copyright holder.
    Copyright 2012 Gale, Cengage Learning. All rights reserved.

     Reader Opinion

    Title:

    Comment:



     

    Article Details
    Printer friendly Cite/link Email Feedback
    Publication:Rubber World
    Article Type:Directory
    Geographic Code:1CANA
    Date:Mar 1, 2012
    Words:8838
    Previous Article:Proactive strategies at AirBoss net results.
    Next Article:Polyone acquired ColorMatrix who bought Gayson.

    Terms of use | Copyright © 2014 Farlex, Inc. | Feedback | For webmasters