Cryogenic shot blast deflashing removes flash from rubber parts.Literature describes how this manufacturer of cryogenic cryogenic /cry·o·gen·ic/ (-jen´ik) producing low temperatures. cry·o·gen·ic adj. 1. Relating to or producing low temperatures. 2. deflashing equipment approved by the U.S. government has served the rubber industry for over 25 years. Several different models are featured. Cryogenic high speed shot blast deflashing is a process used by the rubber industry to remove flash from molded robber parts. The process uses liquid nitrogen Noun 1. liquid nitrogen - nitrogen in a liquid state atomic number 7, N, nitrogen - a common nonmetallic element that is normally a colorless odorless tasteless inert diatomic gas; constitutes 78 percent of the atmosphere by volume; a constituent of all living , high speed rotation and media (shot blast) in varying combinations to remove the flash in a highly precise, economical and expedient ex·pe·di·ent adj. 1. Appropriate to a purpose. 2. a. Serving to promote one's interest: was merciful only when mercy was expedient. b. manner, according to according to prep. 1. As stated or indicated by; on the authority of: according to historians. 2. In keeping with: according to instructions. 3. the literature. Parts that have thin flash are said to be quickly and thoroughly cryogenically deflashed. This process is said to be exceptionally good at removing the inner dimensional and complex flash that cannot be removed by any other method. There are two basic styles of cryogenic deflashing machines, including basket and belt styles. The basket style was designed to process small to medium parts, and offers 100% parts containment. The belt style was designed for larger/heavier parts which require more room to tumble and a stronger rotation system In combinatorial mathematics, rotation systems encode embeddings of graphs onto orientable surfaces, by describing the circular ordering of a graph's edges around each vertex. . Liquid nitrogen is injected into a highly insulated in·su·late tr.v. in·su·lat·ed, in·su·lat·ing, in·su·lates 1. To cause to be in a detached or isolated position. See Synonyms at isolate. 2. chamber in which molded rubber parts are tumbled and blasted. The flash, which should be significantly thinner than the parts themselves, is embrittled by the low temperature. At the same time, a precision throwing wheel, turning at high speeds (up to 8,000 rpm), throws plastic shot at the tumbling parts, and the plastic shot breaks off the brittle flash on impact. The deflashed parts remain in the chamber, and the machine separates reusable media from debris (flash and dust). Crygenic Systems & Parts www.cryomatic.com |
|
||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion