Printer Friendly
The Free Library
19,607,059 articles and books
Member login
User name  
Password 
 
Join us Forgot password?

Crosscut saw.


Paul Paul, 1901–64, king of the Hellenes (1947–64), brother and successor of George II. He married (1938) Princess Frederika of Brunswick. During Paul's reign Greece followed a pro-Western policy, and the Cyprus question was temporarily resolved.  Saws & Systems

The C14 series of optimizing crosscut saws is built on a heavy-duty heav·y-dut·y
adj.
Made to withstand hard use or wear.


heavy-duty
Adjective

made to withstand hard wear, bad weather, etc.

Adj. 1.
 frame with high-speed high-speed
adj.
1. Operated or designed for operation at high speed: a high-speed food processor.

2. Taking place at high speed: a high-speed chase.

3.
 AC servo drives A servo drive is a special electric amplifier used to power electric servo motors. It monitors feedback signals from the motor and continually adjusts for deviation from expected behavior. . The saws remove defects while optimizing cut-to-length strips from 1 to 20 in. in width, the company says. It is equipped with a tilt-feed belt for automatic waste disposal at the point of cut, and it offers automatic sorting and stacking on the outfeed end. Statistical information is recorded, stored and can be monitored, printed out or downloaded from any connected PC.

(678) 444-5000

www.paulsaws.com

CIRCLE 172

[ILLUSTRATION OMITTED]
COPYRIGHT 2006 Vance Publishing Corp.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2006, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

 Reader Opinion

Title:

Comment:



 

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:PRODUCT NEWS: EQUIPMENT
Publication:Wood & Wood Products
Date:Sep 1, 2006
Words:92
Previous Article:Finishing sander.
Next Article:Scanning system.



Related Articles
Modernizing the rough mill.
Panel sizing.
Machines Run Faster, Smarter at Xylexpo.
Deciding Between Crosscut and Rip-First Processing.
Optimizing crosscut & chop saw operations.
Accurate positioning device offered for standard and sliding table saws.

Terms of use | Copyright © 2012 Farlex, Inc. | Feedback | For webmasters | Submit articles