Convert grooved to smooth feed in 3 to 5 hours.A new extruder feed section allows conversion from a grooved to smooth bore in three to five hours, says Macro Engineering & Technology Inc., Mississauga, Ont. Macro will show its Exxfeed modular feed sections for the first time at NPE NPE NullPointerException (Java) NPE Network Processing Engine NPE National Policy on Education NPE National Plastics Exposition NPE Natural Penis Enlargement NPE Nutrition Program for the Elderly in Chicago next month. Exfeed is available for Macro's MacroPlast single-screw extruders in 1.75- to 4-in. diam. A 2.5-in. model with Exxfeed section is available for trials in Macro's lab. Smooth and grooved versions use the same water cooling Water cooling is a method of heat removal from components. As opposed to air cooling, water is used as the heat transmitter. Water cooling is commonly used for cooling internal combustion engines in automobiles and electrical generators. with automatic temperature control. Macro says grooved feed sections raise throughput and run at lower melt temperatures than a smooth bore of the same size. The grooved Exxfeed throat reportedly can process even VLDPE VLDPE Very Low Density Polyethylene and mLLDPE at up to 50% higher outputs than a smooth bore. According to according to prep. 1. As stated or indicated by; on the authority of: according to historians. 2. In keeping with: according to instructions. 3. Macro, a smooth throat is required to feed non-freeflowing materials like powdered resins, sticky elastomers, film fluff, and other regrind. Tel: (905) 507-9000 * PT Direct: 597VB [ILLUSTRATION OMITTED] |
|
||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion