Controlled valve gate timer. (Equipment).High-cavitation LSR 1. (networking) LSR - Label Switching Router. 2. (operating system) LSR - Local Shared Resources. molds are said to be inherently difficult to balance. Even with a balanced runner system, slight variations in cavity fill rates are said to be caused by variations in gate size, vent size, clamp consistency, clamp pressure, platen A long, thin cylinder in a typewriter or printer that guides the paper through it and serves as a backstop for the printing mechanism to bang into. It is typically made of a hard rubber or rubber-like material. See carriage and typewriter. parallelism An overlapping of processing, input/output (I/O) or both. 1. parallelism - parallel processing. 2. (parallel) parallelism - The maximum number of independent subtasks in a given task at a given point in its execution. E.g. and mold temperature. In trying to get the last cavity to fill, it is often said to be the case that an operator can get flash on the first cavities to fill. Valve gated cold runner systems have traditionally used chokes to attempt to control unequal filling of cavities. This method has maintenance issues and is not precise enough to do the job well according to according to prep. 1. As stated or indicated by; on the authority of: according to historians. 2. In keeping with: according to instructions. 3. the company. Controlling the gate valves is said to be a very accurate and repeatable way of eliminating flash. With the controller, the operator can eliminate flash by closing selected gate valves before flash occurs. The controller can also be used to sequentially fill the cavities. (Kipe Molds) Circle 102 on card |
|
||||||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion