Control all aspects of hot-runner operation.A new multifunctional hot-runner controller is available from HRS hrs abbr (= hours) → h hrs abbr (= hours) → Std. Hot Runner A hot runner is an injection mold component containing a series of channels that distributes molten plastic within a mold to increase molding productivity through reduced waste, as the runners arent wasted each cycle by being ejected, as the plasic stays molten and gets used on the System NA Inc., Windsor, Ont. Its new Multipurpose mul·ti·pur·pose adj. Designed or used for several purposes: a multipurpose room; multipurpose software. multipurpose Adjective Organizer Machine (M.O.M.) is an independent controller that manages both traditional heated zones and "Fail Safe" zones that have dual heaters and thermocouples to allow continuous molding in case one component fails. The M.O.M. automatically notifies the operator of a component failure and switches PID (1) (Process IDentifier) A temporary number assigned by the operating system to a process or service. (2) (Proportional-Integral-Derivative) The most common control methodology in process control. control to the backup component. The 12- to 48-zone unit comes with a 12-in. color LCD screen that shows a complete overview of the mold and can provide SPC 1. (business) SPC - Statistical Process Control. Something to do with quality management. 2. (body) SPC - Software Productivity Centre. 3. (company) SPC - Software Publishing Corporation. 4. charts for detailed analysis of optimal working conditions of the hot runner and mold. Energy consumption is measured regularly by the system. A compact portable M.O.M. version has 12 zones. Options include control and monitoring of sequential valve gates and limit switches that indicate position (open/closed) of the gates. Another option is sequence-logic control of one or two fluid mold-temperature controllers. Tel: (519) 973-0212 * www.hrsflow.com |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion