Connie's post scripts.

THE TOP 14 HOT BRIEFS FOR THIS MONTH ... AND THE SURVEY SAYS ...

YOU'LL GET NO FEUD FROM ME ON THAT!

SCAMP Latch Kit

Use NSN 4030-01-467-4737 to get the latch kit for the hook block assembly on the 4-ton self-propelled SCAMP crane. This NSN replaces the parts info shown as Item 18, Fig 150 of TM 5-3810-302-24P.

John Deere in SWA 

Need help with your John Deere equipment in Southwest Asia? Here's where you can go:

Bader Al Mulla & Bros Co. WLL 

Sharq Area, Sour Street Safat, Kuwait City

Telephone # [phone]

D7G WATER PUMP

Use NSN 2930-01-498-2770 when ordering a new water pump for the D7G CAT tractor, Parts for the water pump shown as Item 5, Fig 45 of TM 5-2410-237-24P are still available, but the pump is no longer being stocked as an assembly.

ATLAS Forklift Solenoid

Use NSN 5945-01-503-9468 to get the 24-volt solenoid for the SKYTRAC 10000M forklift's emergency steering pump. This NSN replaces the one shown as Item 3, Figure 126 of TM 10-3930-673-24P.

Link to Small Arms Integration Book Changes

The link we gave you in PS 622 (Sep 04) for accessing the Small Arms Integration Book is no longer good. The correct link is now

http://atiam.train.army.mil/portal/atial/adlsc/view/public/295518-1/st /saib/saib.htm

MAINTENANCE ADVISORY FOR NEW HELMET

Word from OIF and OEF is that some soldiers are not wearing the new advanced combat helmet (ACH) correctly. If the helmet is worn wrong or fits poorly, it may not protect soldiers from fragmentation or ballistic threats, Maintenance Advisory Message (MAM) 04-001-013 advises commanders to review fit and wear standards in TM 10-8470-204-10 and inspect their soldiers, The TM is found at https://www.logsa.army.mil/etms/data/A/080445.pdf

A video showing the correct fitting procedures and the TM are available on AKO and the PEOSoldier website at https://PEOSOLDIER.army.mil

OIL PRESERVED DECKING

Constant exposure to the elements dries, cracks and splinters the wood decking on semitrailers. Prevent that damage by brushing boiled linseed oil on the decking as needed. NSN 8010-00-152-3245 Gets 1 gallon of oil.

M40, M42 Mask Demil Code Changes

The demilitarization code for the M40- and M42-series mask facepieces (NSN 4240-01-415-4517, 4240-01-415-4518, and 4240-01-416-0430) has changed from D (total destruction) to F (contact the item manager). The mask item manager is TACOM's Roberta Wright. Contact her for demil instructions at DSN 793-57571(309) 782-5757 or email [e-mail]

Unserviceable mask facepieces will be sent to Pine Bluff Arsenal Depot to support the mask rebuild program. Look for a supply advisory message soon. The derail code for the facepiece will also be changed on the AMDF.

M915A3 FAN SHROUD

NSN 2930-01-496-1920 gets the fan shroud for the M915A3 tractor trucks with serial numbers up to SIN J21547 or J64175. Use NSN 2930-01-507-2367 to get a fan shroud for trucks starting with J21548.

LRT-110 Crane Tire

Order NSN 2610-01-465-5823 when you need a tire for the 7 1/2-ton rough terrain crane. This NSN replaces the parts info shown for Item 1, Fig 9-11 of TM 5-3810-305-24R

SEE ENGINE OIL FILTER

Use NSN 2940-01-225-1531 to get the engine oil filter for the small emplacement excavator. This NSN replaces the one shown as Item 13, Fig 15 of TM 5-2420-224-24P-1.

Oops! ARS Corrections

In the story on the adapter rail system (ARS) for the M16A4 rifle and M4/M4A1 carbine on Pages 14-16 in PS 623 (Oct 04), we used "mount" and "install" incorrectly. The M203A2 grenade launcher is mounted to the M16A4 or M4/M4A1, not the ARS. The M5 barrel stop is installed in the handguard cap. The M203A2 quick release bracket is installed, as is the ARS on the M16A4 or M4/M4A1. But sighting and aiming devices are mounted on the ARS.

M109/M992A2 Current Regulator

Use NSN 6110-01-427-6395 to get a current regulator for the glow plug and controller on the engine (model 7083-7391) of the self-propelled howitzer and ammo carrier. This NSN replaces the parts info shown as Item 3, Fig 49 of TM 9-2815-202-24P.

Generator Shield NSN

Use NSN 4140-01-350-0839 to get a shield for the HMMWV's 60-amp generator. The guard keeps debris and foreign objects from getting inside the generator's cooling fan area. You'll need two hose clamps, NSN 4730-00-908-6294, to hold the shields in place. Installation instructions come with the shield. If you have any questions about the generator or the shield, contact Team Power at [e-mail]