Conditioning shampoo developed by Degussa.

Here product formulas supplied by producers of raw materials.

Included in some instances are sources of supply for the raw materials and instructions for preparation and use of the finished product.

No guarantee of performance or safety is implied by Happi.

For more complete details, readers should contact the suppliers directly using the telephone number or website provided with each formula.

If your company has a formula that you think would be of interest to readers of Happi, marketers of soaps & detergents; cosmetics & toiletries; waxes & polishes; disinfectants & sanitizers and other chemical specialties, we will be pleased to consider it for publication. Address all material to:

Formulary Editor Happi 70 Hilltop Rd. Ramsey, NJ 07446 USA

Color Boosting Conditioning Shampoo

INGREDIENTS:                                  % WT.

 1. Rewopal SB CS 50 K                         8.25
    (Disodium PEG-5 laurylcitrate
    sulfosuccinate; sodium laureth sulfate)
 2. Rewoteric AM C                            20.90
    (Sodium cocoamphoacetate)
 3. Abil Soft AF 100                           0.50
    (Methoxy PEG/PPG-7/3 aminopropyl dime
    thicone)
 4. Jaguar C-162 (Rhodia)                      0.30
    (Hydroxyporpyl guar
    hydroxypropyltrimonium chloride)
 5. Water                                     64.85
 6. Antil 200                                  2.50
    (PEG-200 hydrogenated glyceryl palmate;
    PEG-7 glyceryl cocoate)
 7. Rewopal PEG 6000 DS                        0.50
    (PEG-150 distearate)
 8. Basic red                                  q.s.
 9. Basic brown                                q.s.
10. Basic yellow                               q.s.
11. Citric acid (30% in water)                 2.20
12. Preservative, perfume                      q.s.

PROCEDURE: Dissolve the guar-quat in the
water. Mix the ingredients in the given order.
Before adding the Rewopal PEG 6000 DS, melt
and dissolve it in a part of the water and heat
it up to approximately 60-65[degrees]C.

MORE INFO

Goldschmidt GmbH Goldscmidtstrasse 100, D-45127 Essen, Germany
Tel: [phone]; Fax: [phone]
E-mail: [e-mail];
Website: www.degussa-personal-care.com

Sprayable W/O Hair Shine

INGREDIENTS:                            % WT.

Phase A

Deionized water                   q.s. to 100
Stepanquat ML                             2.5
  (Quaternium-82)
Stepan PEG 600 ML                         0.5
  (PEG-12 Laurate)

Phase B

Dow Corning 345 Fluid                    20.0
  (Cylcomethicone)
Ethylhexyl Isononanoate                   2.0
  (Stepan octyl isononanoate)
Escalol 557 (ISP)                         7.5
  (Ethylhexyl methoxycinnamate)
Escalol 587 (ISP)                         5.0
  (Ethylhexyl salicylate)
Abil EM-90 (Goldschmidt)                  1.5
  (Cetyl dimethicone copolyol)

Phase C

Preservative, dye, fragrance             q.s.

PROCEDURE:
Mix together all ingredients in Phase A. In a
separate container, mix together all ingredients
in Phase B. Add Phase A to Phase B. Mix
for 20-25 minutes until emulsified. Add Phase
C ingredients. Homogenize for 3-5 minutes at
5000rpm.

MORE INFO

Stepan Company, 22 W. Frontage Rd., Northfield, IL 60093
Tel: [phone]; Fax: [phone] Website: www.stepan.com

Daily Wear Facial Moisturizer

INGREDIENTS:                                       % WT.

Phase A

Deionized water                                    81.95
Glycerin                                            3.00
Carbopol Ultrez (Noveon)                            0.30
  (Carbomer)

Phase B

Crodafos CS-20 Acid (Croda)                         2.00
  (Cetearyl alcohol (and)                      ceteth-20
  phosphate (and) dicetyl phosphate)
Crodaderm B (Croda)                                 0.50
  (Sucrose polybehenate)
Crodaderm S (Croda)                                 1.25
  (Sucrose polysoyate)
Crodamol STS (Croda)                                5.00
  (PPG-3 benzyl ether myristate)
Benzophenone-3 (Aldrich)                            1.00
Propyl paraben                                      0.20
Methyl paraben                                      0.20

Phase C

TEA 98%                                             0.60

Phase D

Helioguard 365 (Croda)                              2.00
  (Water (and) lecithin (and) alcohol (and)
  sodium lactate (and) porphyra umbili
  calis/porphyra umbilicalis extract (and)
  phenoxyethanol)
Phytessence Stevia (Croda)                          2.00
  (Glycerin (and) water (and) stevia rebaudi
  ana extract (and) potassium sorbate (and)
  methyl paraben (and) ethyl paraben)

PROCEDURE:
Combine first two ingredients of Phase A in
main vessel and heat to 75-80[degrees]C. Dust in
remaining ingredient from Phase A. Combine
Phase B ingredients and heat to 75-80[degrees]C. Add
Phase B to Phase A, after all the carbomer has
been hydrated, with mixing. Add Phase C. Cool
to room temperature. Add Phase D. Adjust pH,
if necessary.

MORE INFO:

Croda Inc., 300-A Columbus Circle, Edison, NJ 08837
Tel: [phone]; Fax: [phone]; Website: www.crodausa.com

Fresh Foundation in Powder Form

INGREDIENTS:                                            % WT.

Phase A

Covagel (LCW)                                            3.80
  (Sodium carboxymethyl starch)
Mica 8 AS R0433 (LCW)                                    2.40
  (Mica (and) triethoxycaprylylsilane)
Talc AS R0435 (LCW)                                      6.00
  (Talc (and) triethoxycaprylylsilane)
Covabead PMMA 2MUS1, (LCW)                               2.40
  (Methylmethacrylate                            crosspolymer
  (and) silica)

Phase B

PW Covasil S1 (LCW)                                      3.10
  (Titanium dioxide (and) trimethoxycaprylyl
  silane)
Unipure Red LC 381 AS-EM (LCW)                           0.38
  (CI 77491 (and) triethoxycaprylylsilane)
Unipure Yellow LC 182 AS-EM (LCW)                        1.10
  (CI 77492 (and) triethoxycaprylylsilane)
Unipure Black LC 989 AS-EM (LCW)                         0.20
  (CI 77899 (and) triethoxycaprylylsilane)
Unipure White LC 981 AS-EM (LCW)                         6.25
  (CI 77891 (and) triethoxycaprylylsilane)

Phase C

Pure water                                              71.57
Preservatives                                            0.30
Fucosorb (LCW)                                           2.00
  (Algae (and) sorbitol)
Glycerin                                                 0.50
Triethanolamine (99%)                          adjust to pH=8

PROCEDURE: Mix powders of Phase B with a
blender for powders (in a lab, use a coffee
mill). Mix powders of Phase A with Phase B
with a blender for powders (in a lab use a baby
chef). Prepare Phase C and pour Phase C in
Phase A & B under mechanical stirring and stir
until obtaining a fine powder.

MORE INFO:

Sensient Cosmetic Technologies 7-9 Rue de l'Industrie Saint Ouen
l'Aumone, France 95310
Tel: [phone]; Fax: [phone]

Funky Wet Fibers

INGREDIENTS:                                 % WT.

Phase A

Deionized water                              46.53
Carbopol Ultrez 21 Polymer                    0.30
  (Acrylates/C10-30                          alkyl
  acrylate crosspolymer)
AMP-Ultra PC 2000 (95%)                       0.03
  (Aminomethyl propanol)

Phase B

Fixate Superhold Polymer                     15.68
  (Polyacrylate-2 crosspolymer 30%)
Schercemol DISF Ester                         1.00
  (Diisostearyl fumarate)
Ethanol                                       3.00
  (Alcohol Denat.)
Glydant Plus Liquid                           0.40
  (DMDM Hydantoin (and) lodopropynyl butyl
  carbamate)
AMP-Ultra PC 2000 (95%)                       2.06
  (Aminomethyl propanol)

Phase C

Propylene glycol                              5.00
RITA PEO-18 (or) Polyox WSR-301               0.30
  (PEG-90M)
Deionized water                              20.00

Phase D

F D & C Yellow No. 6                          3.50
D & C Red No. 33                              2.20

PROCEDURE: Sprinkle Carbopol Ultrez 21 polymer
on the surface of deionized water and
allow to wet. Begin gentle mixing. Partially
neutralize Carbopol polymer dispersion with
AMP-Ultra PC 2000. Mix until uniform. Add
Phase B ingredients one at a time in order to
the batch with mixing. Adjust pH to 6.8-7.2
with AMP-Ultra PC 2000. Prepare phase C: mix
glycol and water. Add slowly PEG-90M to the
mix with strong agitation and slight heating,
until homogenous. Add phase C to the batch
with mixing. Add dyes. Mix until uniform.

MORE INFO:

Noveon Personal Care 9911 Brecksville Road, Cleveland, OH 44141
Tel: [phone]; Fax: [phone] Website: www.noveon.com

Natural Moisturizing Shampoo

INGREDIENTS:                               % WT.

1. Farmal HFS 2656                          12.0
   (Hydrolyzed corn starch)
2. Ammonium lauryl sulfate (30%)            40.0
3. Lauramidopropyl Betaine (30%)             5.0
4. Isostearamidopropyl morpholine        lactate
   (25%)                                     4.5
5. Water, preservative, dye, fragrance      q.s.

PROCEDURE:

Add first four components to water. Heat to
40[degrees]C and blend until clear. Add fragrance, dye
and preservatives. If needed, adjust pH to 5.0-6.0
with dilute sodium hydroxide.

APPEARANCE:

Product is a viscous clear shampoo. It provides
excellent foam, mild conditioning and moisturizing
properties.

MORE INFO:

Corn Products International, Inc. 5 Westbrook Corporate Center
Westchester, IL 60154
Tel: [phone]; Fax: [phone]
Website: www.farmalingredients.com

Skin Extravagance Caviar Creme

INGREDIENTS:                                             % WT.

Phase A

Emulgade SE-PF                                            5.00
  (Glyceryl stearate (and) ceteareth-20 (and)
  ceteareth-12 (and) cetearyl alcohol (and)
  cetyl palmitate)
Lanette 22                                                2.00
  (Behenyl alcohol)
Cegesoft C24                                              4.00
  (Ethylhexyl palmitate)
Cetiol PGL                                                4.00
  (Hexyldecanol (and) hexyldecyl laurate)
Fitoderm                                                  3.00
  (Squalane)
DC 200-350                                                1.00
  (Dimethicone)
Cosmedia SP                                               1.00
  (Sodium polyacrylate)

Phase B

Deionized water                                 q.s. to 100.00
Plantapon ACG 35                                          0.80
  (Disodium cocayl glutamate)
Elestab 50J                                               0.40
  (Chlorphenesin (and) methylparaben)
Glycerine                                                 4.00

Phase C

Compexe caviar LS                                         9747
(Laboratoires Serobiologiques)                            3.00

Phase D

Perfume Champaline G10415611                              0.05
  (Fragrance)
Citric acid 10%                                           q.s.

PROCEDURE: Heat Phases A and B at 75[degrees]C.
Add Phase B into A while mixing under low turbine
stirring until 60[degrees]C. Add Phase C until
homogenous. Allow to cool to room temperature
under gentle mixing, add Phase D at 30[degrees]C.
Adjust pH value with citric acid.

MORE INFO:

Laboratoires Serobiologiques 300 Brookside Ave., Ambler, PA 19002
Tel: [phone]; Fax: [phone]; Website: www.cognis.com

Smooth Antiperspirant Cream

INGREDIENTS:                         % WT.

Phase A

Deionized water                       q.s.
Structure XL Starch (Noveon)          4.00
  (Hydroxypropyl starch phosphate)
Aluminum chlorohydrate               20.00

Phase B

Cetiol OE (Cognis)                    3.00
  (Dicraprylyl ether)
Cetiol LC (Cognis)                    2.50
  (Coco/caprylate/caprate)
Pricerine 9091 (Uniqema)              2.00
  (Glycerin)
Eutanol G (Cognis)                    0.50
  (Octyldodecanol)
Eumulgin B1 (Cognis)                  1.00
  (Ceteareth-12)
Eumulgin B2 (Cognis)                  1.00
  (Ceteareth-20)
Crodacol CS90EP (Croda)               0.50
  (Cetearyl alcohol)
Estol 1474 (Uniqema)                  1.00
  (Glyceryl stearate)
Estol 3614 (Uniqema)                  1.00
  (Glyceryl laurate)
Estol 3694 (Uniqema)                  0.50
  (Cetyl palmitate)

Phase C

Avocado Seed Oil (Jan Decker)         0.30
  (Persea gratissima)
Perfume                               0.20

PROCEDURE:

Premix Structure XL starch in water, let it stir
until the solution is homogenous. Add the aluminum
chlorohydrate to Phase A, heat the mixture
up to 65[degrees]C. Premix Phase B and heat up to
65[degrees]C. Add Phase B to Phase A and let it stir
while it's cooling to 30[degrees]C. Add Phase C, cool to
room temperature.

MORE INFO:

National Starch Bridgewater, NJ Tel: [phone] Fax: [phone]
Email: [e-mail]