Compression/injection. (Literature: equipment).This six-page, four-color four-col·or adj. Of or being an overprinting or photographic process in which three primary colors and black are transferred by four different plates or filters to a surface, reproducing the colors of the subject matter. brochure highlights the company's line of Mega C and Mega I presses for molding large articles or large multi-cavity molds. The Mega I series normally has a down-acting clamp clamp (klamp) a surgical device for compressing a part or structure. rubber dam clamp a metallic device used to retain the dam on a tooth. clamp n. and a horizontally placed parting line injection unit, but depending on requirements, on upacting clamp can be supplied on the top version with a screw-piston for the first in, first out injection unit. The Mega C series is available with 2,500 x 2,500 mm platens and up to four clamp cylinders. Vacuum box, single or multiple, ejectors, internal or external, and shuttle shuttle: see loom. shuttle In the weaving of cloth, a spindle-shaped device used to carry the crosswise threads (weft) through the lengthwise threads (warp). Not all modern looms use a shuttle; shuttleless looms draw the weft from a nonmoving supply. systems are available. All presses can be equipped or retrofitted with injection units, normally of a horizontal execution. The proven Microplus 4 control system includes a modem for teleservice, interactive diagnostics (1) Software routines that test hardware components (memory, keyboard, disks, etc.). Diagnostics are often stored in ROM chips and activated on startup. (2) Error messages in a programmer's source code that refer to statements or syntax that the compiler or assembler and production management control. (Rubber Molding Technology, 2325 W. Hedge Pl., McHenry, IL 60050) Circle 103 on card |
|
||||||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion