Colonial formulates new Suga Quat body wash.

Here are product formulas supplied by producers of raw materials.

* Included in some instances are sources of supply for the raw materials and instructions for preparation and use of the finished product.

No guarantee of performance or safety is implied by Happi.

* For more complete details, readers should contact the suppliers directly using the telephone number or website provided with each formula.

If your company has a formula that you think would be of interest to readers of Happi" marketers of soaps & detergents; cosmetics & toiletries; waxes & polishes; disinfectants & sanitizers and other chemical specialties, we will be pleased to consider it for publication. Address all material to:

Formulary Editor

Happi

70 Hilltop Rd. Ramsey, NJ 07446 USA

Body Wash With Suga Quat S-1210

INGREDIENTS:                  % WT.

Phase A                       40.33
Deionized water                0.20
[Na.sub.2]EDTA                50.00
Colonial SLES-1

Phase B
EGMS                           2.00

Phase C
Colateric COAB                 2.50

Phase D
Suga QuatS-1210                2.00

Phase E
Colamid CMA                    2.00
Belle Aire plumeria #18957     0.15

Phase F
Glydant                        0.20

Phase G
NaC1                           0.34

Phase H
FD&C blue #1                   0.28
  (0.1% solution)

PROCEDURE:
Heat phase A to 75[degrees]C. Add phases B, C and D.
Combine phase E; heat to solubilize fragrance.
Add to the batch. Cool to 35[degrees]C and add remaining
phases. Adjust viscosity.

PROPERTIES:
Lab control: Adjust viscosity to 5K cps
pH: 5.7
Viscosity: 5,000 cps- RVT #4 @ 20 rpm

MORE INFO:

Colonial Chemical, Inc., 225 Colonial Dr., South Pittsburg TN 37380
Tel: [phone]; fax: [phone]; Website:
www.colonialchem.com

Hair Conditioner with Ginseng Herbamilk

INGREDIENTS:                   % WT.

Phase A                         1.50
Genamin KDMP                    2.20
Genapol L-3                     3.00
Tego Alkanol 6855               0.80
Preservative

Phase B
Deionized water                84.53
Glycerin                        3.00
Citric acid 10%                 0.12

Phace C
Ginseng Herbamilk               3.00

Phase D
Ginger Herbasol Extract IPM     1.00
Cetiol HE                       0.50
Fragrance                       0.35

PROCEDURE:

Heat phase A and phase B separately to 75[degrees]C.
Add phase A to phase B and stir. Allow to cool
to 35[degrees]C. Add phase C while stirring gently.
Allow to cool to 30[degrees]C. Add phase D while stirring
gently. Allow to cool to room temperature.

MORE INFO:

Cosmetochem Int'l Ltd., Sennweidstrasse 44/46, 6312 Steinhausen/Zug,
Switzerland
Tel: [phone]; Fax: [phone]
Email: [e-mail]; Website www.cosmetochem.ch

Emollient Syndet Bar

INGREDIENTS:                                              % WT.

Mackamide CMA                                               8.0
  (cocamide CMA)
Cetyl alcohol                                               4.0
Mackalene 426-100                                           1.5
  (Isostearamidopropylmorpholine lactate)
Mackol CAS-100SG                                           34.0
  (Sodium coco-sulfate)
Global Plus Maltodextrin                                   46.0
  (Corn Products U.S.)
Titanium dioxide                                            0.2
Lactic acid (88%)                            q.s. to pH 5.5-6.0
Water, fragrance, preservative                      q.s. to 100

PROCEDURE:

Melt Mackamide CMA and cetyl alcohol (65-70[degrees]C).
Hold temperature and with a Patterson
mixer, slowly add Mackol CAS-100SG, Global
Plus and titanium dioxide. Dilute lactic acid
(Approximately 1.4%) in remaining water and
slowly add the batch until the pH is 5.5-6.0.
Add fragrance and preservative. Blend until the
mixture is homogenous. Mill and extrude.

COMMENTS:
The finished bar provides excellent lather and
a smooth moisturizing feel to the skin.

More info:

McIntyre Group, 24601 Governors Highways, University Park, IL 60466
Tel: [phone]; Fax: [phone]
E-mail: [e-mail]; Website: www.mcintyregroup.com

Ringing Gel

INGREDIENTS:                                % WT.

Phase A
Ceteareth-20                                 25.0
Cyclomethicone                                4.0
Phenoxyethanol(and) methylparaben             0.5
  (and) ethylparaben (and) butylparaben
  (and) propylparaben
Mineral oil                                   6.0
PEG-7 glycerol cocoate                       10.0
Cyclopentasiloxane (and)                     10.0
  dimethicone crosspolymer
  (and) dimethicone/vinyl
  dimethicone crosspolymer
  (and) dimethiconol

Phase B
Maltodextrin (and) caffeine (and)             2.0
  paullinia cupana seed extract
  (and) carnitine (and) microcrystalline
  cellulose (and) cysteic acid (and)
  pantetheine sulfonate
Distilled water                              27.7
Glycerin                                      4.0
Propylene glycol                              9.0
Fragrance                                     1.0
0.2% solution of Red 40                       0.8
  in deionized water

PROCEDURE:
Heat ceteareth-20 to 80[degrees]C with gentle mixing.
Add the remaining ingredients of phase A, one
at a time, maintaining temperature at 70[degrees]-80[degrees]C.
Keep the mixer covered. Use a closed
mixing vessel and nitrogen gas to make the
head space of the mixer inert. Increase agitation.
In a separate vessel, combine and heat
phase B to 80[degrees]C with gentle mixing. Add phase
B to phase A. Pour slowly and maintain temperature.
Stir phase B occasionally during the
addition. Continue to use strong mixing with
scraping and dispersing actions in the main
mixer. As phase B is added, the batch will
become increasingly thick and waxy. It may be
necessary to add phase B in increments. After
the addition is complete, mix for an additional
10 minutes. Discontinue heating and nitrogen
and cool gradually while mixing.

Stability: stable for at least one month at 50[degrees]C.

More info:

Dow Corning, PO Box 994, Midland, MI 48686-0994
Tel: [phone]; Fax [phone]
E-mail: [e-mail]; Website: www.dowcorning.com

Eye Balm With 1% Ectoin

INGREDIENTS:                        % WT.

Phase A
Water (demineralized)               59.00
Polyquartenium-10                    0.25
  (U-Care J400/Amerchol)
Glycerin                             3.00
  (Emery 916/Cognis)
Disodium EDTA                        0.10
Allantoin                            0.15

Phase B
Cyclomethicone                       5.00
  (DC 345, Dow Corning)
Dimethicone                          2.00
  (DC 200,100 cst/Dow Corning)
Cyclomethicone, dimethiconol         3.00
  (Dow Corning 1401)
Cetyl alcohol                        1.00
  (Crodacol C-70/Croda)
Bisabolol                            0.30
Vit. E acetate                       0.25

Phase C
Acrylamide, C13-14                   3.00
  isoparaffin, laureth-7
  (Sepigel 305/Seppic)

Phase D
Water (demineralized)                5.00
Ectoin                               1.00

Phase E
Methylparaben, propylparaben,        1.00
  isobutylparaben, phenoxyethanol
  (Liquapar optima/ISP)

PROCEDURE:
Disperse U-Care in the water phase, then heat
to 70[degrees]C. Add the remaining ingredients of
phase A. Combine separately the ingredients of
phase B and heat to 70[degrees]C. Add to phase A while
mixing. Add phase C to A, B and mix well until
a homogeneous mixture is obtained. Add D and
E at 40][degrees]C; mix until uniform.

PROPERTIES:
pH: 6.0-6.5
Stability: 45[degrees]C- 3 months

MORE INFO:

Rona Cosmetics/EMD Chemicals, Inc., 7 Skyline Drive, Hawthorne,
NY 10532
Tel: [phone]; Fax: [phone]; Website:
www.emdchemicals.com

Shampoo for Ethnic Hair

INGREDIENTS:                                        % WT.

Rhodapex ES-2                                        44.0
  (Sodium laureth sulfate)
Geropon SBFA-30                                       5.5
  (Disodium laureth sullfosuccinate)
Miranol Ultra C-32                                    6.0
  (Sodium cocoamphoacetate)
Mirasil DME-30/KCG                                    1.8
  (Water and dimethicone and
  laureth-8 and succinoglycan)
Mirasheen CP-820/G                                    1.8
  (Glycol stearate and laureth-7 and coca-
  midopropyl betaine and sodium cocoam-
  phoacetate and sodium laureth sulfate)
Carbopol SF1                                          4.9
  (Acrylates copolymer)
NaOH (18%)                                            1.1
  (Sodium hydroxide)
Glycerin                                              0.9
Crovol A70                                            0.8
  (PEG-60 almond glycerides)
Hydroveg VV                                           1.8
DL Panthenol 50W                                      0.9
Vitamin E acetate                                     0.3
  (Tocopheryl acetate)
Alkamuls CRH40-C                                      0.5
  (PEG 40 hydrogenated castor oil)
Germaben II-E                                         0.2
Citric acid (50%)                                     0.6
Perfume                                               0.4
Deionized water                               q.s. to 100

PROCEDURE:

Introduce Carbopol SF-1 solution into water.
Add Rhodapex ES-2 and Geropon SBFA, stir
gently until homogeneous. Adjust pH to 6.5
with sodium hydroxide (18%) to develop viscosity.
Add Miranol Ultra C-32, Mirasil DME-30
KCG and Mirasheen CP-820/G. Add preservative,
Crovol A70, Hydroveg VV, Panthenol, vitamin
E acetate, Alkamuls CRH-40/C and perfume.
Drop pH with citric acid to 5.5.

Properties:
Appearance: pearlescent
pH: 5.7
Viscosity (at 20[degrees]C): 5,400 mPa.s
Stability: stable for three months at 45[degrees]C

MORE INFO:

Rhodia Inc., 259 Prospect Plains Rd., Cranbury, NJ 08512
Tel: [phone]; Fax: [phone]; Website: www.hpcii.rhodia.com