Collagen boosting lotion from Evonik.

Light O/W Collagen Boosting Lotion

Evonik Goldschmidt
(49) 201-173-2854 * www.evonik.com/personal-care
Email: [e-mail]

INGREDIENTS:                                                   % WT.

Phase A
Tego Care LTP (Sorbitan laurate,                                 1.5
  polyglyceryl-4 laurate, dilauryl citrate)
Tego Derm CBS (PPG-3 myristyl ether; salicyloyl                 10.0
phytosphingosine)
Tegosoft OP (Ethylhexyl palmitate)                               4.6
Tego Carbomer 140                                               0.15
Tego Carbomer 141                                               0.15
Xanthan Gum                                                      0.1
Phase 8
Glycerin                                                         3.0
Water                                                           80.5
Phase C
Sodium hydroxide (10% in water)                                 q.s.
Phase Z
Preservative, Parfum                                            q.s.

PROCEDURE: Mix ingredients of phase A. Combine phases A and B
without stirring. Homogenize. Add phases C and Z and stir well.
COMMENTS: Viscosity: 19 Pas, Brookfield RVT Sp. 4/5 rpm

Under Eye Cream

RITA Corporation
[phone] * www.ritacorp.com

INGREDIENTS:                                                   % WT.

1. Water                                                       66.64
2. RITA Glycerin (Glycerin)                                     3.00
3. Methylparaben NF (Methylparaben)                             0.20
4. Tetrasodium EDTA                                             0.10
5. Pationic SSL (Sodium stearoyl lactylate)                     1.56
6. Rita IPP (Isopropyl palmitate)                               5.00
7. Simchin Refined (Simmondsia chinensis (jojoba)
     seed oil)                                                  2.00
8. Petrolan (Petrolatum)                                        5.00
9. RITA Hydrogenated coconut oil
     (Hydrogenated coconut oil)                                 4.00
10. RITA Cetearyl alcohol 50/50 (Cetearyl alcohol)              3.00
11. RITA GMS (Glyceryl stearate)                                4.00
12. Propylparaben (Propylparaben)                               0.10
13. Diazolidinyl urea                                           0.20
14. Ritalab Peptide Tightener
      (Hydrolyzed wheat protein)                                1.00
15. Ritalab oat extract (Avena sativa (oat)
      bran extract)                                             1.00
16. Ritalab hydrolyzed soy fluor (Hydrolyzed soy fluor)         1.00
17. Ritalab flax extract (Hydrolyzed linseed extract)           1.00
18. Ritalab lupine protein (Hydrolyzed lunine nrntein)          1.00

PROCEDURE: Combine items 1-4, 13 and heat to 80[degrees]C. Combine
items 5-12 and heat to 80[degrees]C. Add oil phase to water
phase. Cool to room temperature and add items 14-18.

Skin Brightening Cream with Chromabright MFF

Centerchem, Inc.
[phone] * www.centerchem.com

INGREDIENTS:                                                   % WT.

Phase A
De ionized water                                               65.95
Ultrez 10 (Lubrizol)                                            0.15
1,3-butylene glycol                                             6.00
Hispagel 200 NS (Cognis Iberia)                                10.00
Phase B
Promulgen D (Lubrizol) (Cetearyl alcohol and
  ceteareth-20)                                                 1.50
Cutina GMS-V NA (Cognis) (Glyceryl stearate)                    1.25
Myrj 59 (Unigema) (PEG-100 Stearate)                            1.00
Fitoderm (Lipotec)                                              4.00
Tegosoft CT (Evonik) (Caprylic/capric triglyceride)             3.00
Lameform TGI (Cognis) (Polyglyceryl-3 diisostearate)            0.50
Phase C
Tealan 99% (RITA) (Triethanolamine)                             0.15
Deionized water                                                 1.00
Phase D
Chromabright MFF (Lipotec)                                      5.00
Diocide (Centerchem)                                            0.50

PROCEDURE: Heat Phase B to 75[degrees]C. Slowly add carbomer to Phase
A water and mix until uniform. Begin heating to 75[degrees]C. Add
remaining Phase A ingredients and mix until uniform. When both phases
are at 75[degrees]C, add Phase B to Phase A under moderate mixing.
Mix for 10 minutes. Begin cooldown. At 50[degrees]C, add Phase C as a
solution.  Mix until uniform. At 35[degrees]C, add Phase D
ingredients. Mix until uniform.

Shine & Style Hair Gel with Gelaid WSL

Chemsil Silicones, Inc.
877-700-0302 * www.chemsil.com

INGREDIENTS:                                                   % WT.

Phase A
Deionized water                                                30.00
Phase B
Propylene glycol                                               35.00
Phase C
Luviskol VA 73 W (BASF) (PVPNA copolymer)                      10.00
Phase D
Gelaid WSL (Chemsil Silicones, Inc.)                           23.00
  (Cyclopentasiloxane (and) dimethicone (and)
  vinyl dimethicone crosspolymer (and) hydroxylethyl
  acrylate (and) sodium acryloyl dimethyl taurate
  copolymer (and) cyclohexasiloxane)
Phase E
Propylene glycol                                                2.00
Phase F
Deionized water                                                 2.00

PROCEDURE: This is a cold blending procedure. Heat is not required.
As each step is completed, mixture should be homogenous and clear
before proceeding. Step 1: Add phase B to phase A. Add phase C to
Step 1. Add phase D to batch. Add phase E to batch at moderate
agitation. Titrate product using phase F to match Refractive Index
and to obtain full clarity.

Acne Treatment Lotion with Intelimer 8600

Air Products & Chemicals Personal Care
[phone] * www.airproducts.com/personalcare

INGREDIENTS:                                                   % WT.

Phase A
Mineral oil USP (Rite Aid)                                      12.5
Arlacel P135 (Croda) (PEG-30 dipolyhdroxy stearate)              1.0
Lipocol S-2 (Lipo) (Steareth-2)                                  2.0
Lipocol S-21 (Lipo) (Steareth-21)                                1.0
Dow Corning 200/50cst (Dow Corning) (Dimethicone)                4.5
Finsolv TN (Innospec) (C12-15 alkyl benzoate)                    4.5
Phase B
Deionized water                                                 71.0
Salicylic acid powder (Universal Preservative)                   2.0
Keltrol G-T (CP Kelco) (Xanthan gum)                             0.9
Intelimer 8600 (Air Products)
(Poly C8-22 alkyl acrylate/metacrylic acid cross polymer)        2.1
DMDM Hydantoin (Lonza) (Glydant Plus liquid)                     0.5

PROCEDURE: Combine all phase A ingredients into a vessel while
stirring mixture. In another vessel add deionized water then slowly
add xanthan gum and salicylic acid while stirring. Continue to stir
until clear homogenous mixture forms. Add other remaining phase
B ingredients one by one to acid mixture while continuing to stir.
Begin heating both vessels until the temperature of both vessels is
between 80-85[degrees]C. Once a 80-85[degrees]C temperature has been
achieved add phase A to phase B slowly while continuing to stir the
mixture. Remove from heat and homogenize the mixture for three
minutes. Let the emulsion cool to the desired temperature. Adjust the
pH with triethanolamine (TEA 99%) and package.

Moisturizing Oil-in-Water Cream

Clariant Corporation
Functional Chemicals Division, R&D Personal Care
[phone] * www.clariant-personalcare.com

INGREDIENTS:                                                   % WT.

Phase A
Hostaphat CS 120 (Clariant) (Stearyl phosphate)                 1.00
Velsan D8P-3 (Clariant) (Isopropyl PPG-2 isodeceth-7            2.00
  carboxylate)
Isocetyl isostearate                                            6.00
Isostearyl palmitate                                            3.60
Caprylic/capric triglyceride                                    5.00
Ethylhexyl palmitate                                            2.40
Glyceryl stearate                                               4.00
Stearic acid                                                    4.00
Cetyl alcohol                                                   1.00
Phase B
Water                                                          62.35
Hostapon KCG (Clariant) (Sodium cocoyl glutamate)               0.45
Glycerin                                                        5.00
Sodium citrate                                                  1.00
Phenonip (Clariant) (Phenoxyethanol, methylparaben,
  ethylparaben, butylparaben, propylparaben,
  isobutylparaben)                                              0.90
Sodium hydroxide (10% aq.)                                      1.00
Phase C
Fragrance Soft Vanilla VV41-0028 (Ungerer)                      0.30
Citric acid                                                    q.s.

PROCEDURE: Melt components of phase A at ~75-80[degrees]C, with
stirring. Heat phase B to -70[degrees]C. Add (2) to (1) and continue
mixing until cool. Add phase C at -35[degrees]C and adjust pH if
necessary. (5) Homogenize emulsion. Results: pH (1 % aq.)
6.5 [+ or -] 0.5 APPEARANCE: White cream. Stability-12 weeks
at 45[degrees]C, 3 freeze-thaw cycles.

Broad Spectrum SPF 45 Anti-Aging Moisturizer

The HallStar Company
[phone], [phone] * www.hallstar.com
E-mail: [e-mail]

INGREDIENTS:                                                   % WT.

Phase A
HallBrite OS USP (HallStar) (Ethylhexyl salicylate)             5.00
HallBrite HS USP (HallStar) (Homosalate)                       15.00
Neo Heliopan 303 (Symrise) (Octocrylene)                        2.75
HaIIBrite BHB (HaIIStar) (Butyloctyl salicylate)                5.00
Polycrylene (HaIIStar) (Polyester-8)                            4.00
Vitamin E acetate oil USP, FCC (BASF)
  (Tocopheryl acetate)                                          0.20
Phase B
Neo Heliopan BB (Symrise) (Benzophenone-3)                      6.00
Parsol 1789 (DSM) (Butyl methoxydibenzoylmethane)               3.00
Phase C
CoVera (HaIIStar) (Aloe barbadensis leaf juice)                 0.48
SD alcohol 40 (200 proof)                                      56.66
Phase D
Dermacryl 79 (National Starch)
  (Acrylates/octylacrylamide copolymer)                         1.91

PROCEDURE: An explosion-proof environment is required throughout
preparation and packaging. Combine phase A in a secondary vessel,
start center-stir (prop) mixing, heat to 50[degrees]C and then add
phase B. When homogeneous and clear, start cooling. To the primary
vessel add phase C. With mixing add phase D to phase C. With both
phases homogeneous, slowly add phase AB to phase CD. When phase ABCD
is uniform and clear, perform final quality assurance checks and
package product in pump spray bottle. COMMENTS: U.S. Patent Nos.
5,783,173; 5,788,954; 5,849,273; 6,350,894, 6,800,274 and 6,962,692
This sprayable formula designed for outdoor activity provides
superior broad-spectrum protection against both the burning and aging
rays of the sun. Polycrylene, a new polymeric photostabilizer, keeps
the formulation from losing effectiveness during sun exposure.
Emollient and solvent HallBrite BHB adds a nice touch of elegance
to the afterfeel. Clear yellow liquid, pH 6.2 (25[degrees]C). Stable
through three freeze-thaw cycles and at 45[degrees]C for at least
five months. For external use only. Flammable: Do not use near heat,
flame or while smoking.

Age Spot Treatment Cream

DSM Nutritional Products
[phone] * www.nutraaccess.com

INGREDIENTS:                                                   % WT.

Phase A
Estol 3650 (Unigema) (Glyceryl myristate)                       2.50
Lanette 16 (Cognis) (Cetyl Alcohol)                             2.50
Parsol EHS (DSM) (Ethylhexyl salicylate
  (octisalate; USAN))                                           5.00
Parsol 1789 (DSM) (Butyl Methoxydibenzoylmethane                2.00
  (Avobenzone; USAN)
Parsol 340 (DSM) (Octocrylene (Octocrilene; USAN))              1.70
Sweet almond oil (Gustav Heess)                                 2.00
(Prunus amygdalus dulcis (sweet almond) oil)
Finsoly TN (Innospec) (C12-15 alkyl benzoate)                   8.00
Butylated hydroxytoluene (Merck) (BHT )                         0.05
Dow Corning 200/350 cs (Dow Corning) (Dimethicone)              0.50
dl-alpha -Tocopheryl acetate (DSM) (Tocopheryl acetate)         1.00
Phenonip (Clariant) (Phenoxyethanol & methylparaben &
  ethylparaben & butylparaben & propylparaben
  & isobutylparaben)                                            0.80
Brij 72 (Unigema) (Steareth-2)                                  2.00
Brij 721 (Unigmea) (Steareth-21)                                2.00
Dow Corning 345 Fluid (Dow Corning)
  (Cyclopentasiloxane & cyclohexasiloxane)                      4.00
Phase B
Water dem.                                                     45.35
1,3-Butylenglykol (Merck) (Butylene glycol)                     2.00
Glycerin (Cognis)                                               3.00
Edeta BD (BASF) (Disodium EDTA)                                 0.10
Keltrol CG-T (CP Kelco) (Xanthan gum)                           0.20
Carbopol Ultrez 21 (Noveon) (Acrylates/C10-30 alkyl
  acrylate crosspolymer)                                        0.25
Phase C
Water dem.                                                     10.00
Stay-C 50 (DSM) (Sodium ascorbyl phosphate)                     2.00
Niacinamide PC (DSM) (Niacinamide)                              3.00
Natriumdisulfit (Merck) (Sodium metabisulfite)                  0.05

PROCEDURE: Heat phase A up to 85[degrees]C; and heat also phase B up
to 85[degrees]C. When both have the same temperature add phase B to
phase A while homogenizing intensively. Cool down the product to
35[degrees]C while stirring. Now add phase C homogenize intensively
again. It is generally recommended to use vacuum while producing the
emulsion. TECHNICAL DATA: pH - 7.19; Viscosity--52800 cps
(Brookfield, RV 6, 10 rpm).

Fresh Solutions Sulfate Free Shampoo

BASF Corporation
[phone] * www.cosmetic.basf.com

INGREDIENTS:                                                   % WT.

Phase A
Deionized water                                                 q.s.
EDETA BD (BASF) (Disodium EDTA)                                 0.10
Pluracare E400 NF (BASF) (PEG-8)                                0.50
Luviquat Sensation (Polyquaternium-87)                          0.75
Velvetex BK-35 (Cognis) (Cocamidopropyl betaine)               20.00
Avanel S150 CG N (BASF) (Sodium C12-15
  pareth-15 sulfonate)                                         11.00
Jordapon ACI-30G (BASF) (Ammonium cocoyl isethionate)          13.00
Comperlan 100 (Cognis) (Cocamide MEA)                           2.00
Phase B
D & C Red #33 (0.15% solution)                                  0.10
FD & C Blue #1 (0.15% solution)                                 0.06
D-Panthenol 75W (BASF) (Panthenol)                              1.00
Glydant Plus Liquid (Lonza) (DMDM hydantoin (and)               0.50
  iodopropynyl butylcarbamate)
875447 Berrylicious (Drom) (fragrance)                          0.35
Sodium chloride                                                qs **

PROCEDURE: Heat water to 70[degrees]-75[degrees]C, add ingredients
of phase A one at a time with high agitation until fully dissolved.
Continue mixing for 10 to 15 minutes. Start cooling to 40[degrees]C.
At 40[degrees]C add ingredients of phase B. Continue mixing until
homogeneous. ** qs with sodium chloride to desired viscosity if
necessary. APPEARANCE: Purple Shampoo; pH - 6.0 to 6.8; Viscosity
(Brookfield DV II + Pro RV6/10rpm/60 sec)--7,000 to 13,000 cps

Water-Resistant Hair Styling Gel

Lubrizol Advanced Materials Inc. (Noveon Consumer Specialties)
[phone], [phone] * www.personalcare.noveon.com

INGREDIENTS:                                                   % WT.

Phase A
Deionized water                                                62.11
Disodium EDTA                                                   0.05
Butylene glycol                                                 3.00
Fixate * PLUS polymer (Lubrizol)
  (Polyacrylate-14 (30 %TS)                                    10.00
Avalure * AC 120 Acrylic Copolymer
  (Acrylates copolymer (29 %TS))                                3.00
AMP-Ultra PC 2000 (Dow/Angus)                                   0.57
  (Aminomethyl propanol (95%))
SDA alcohol (99%) ethanol                                      10.00
Phase B
Cremophor CO 40 (BASF) (PEG-40 Hydrogenated castor oil)         0.16
PHM326APH Aqua Green (Glvaudan) (Fragrance)                     0.08
Phase C
Green 5 (CI 61750) D&C Green No. 5 (1.0% solution)              0.25
Yellow 5 (CI 19140), D&C Yellow No. 5 (1.0% solution)           0.08
Phase D
Covabsorb EW (LCW) (Ethylhexyl methoxycinnamate,
  butyl methoxydibenzoylmethane, ethylhexyl salicylate,
  PPG-26-buteth-26 (and) PEG-40 hydrogenated castor
  oil)                                                          0.30
Deionized water                                                10.00
Phase E
Glydant Plus (Lonza) (DMDM hydantoin (and)
  iodopropynyl butylcarbamate)                                  0.30
Ronastar Green Sparks (Merck/EMD) (Calcium aluminum
  borosilicate, titanium dioxide, silica (and)
  tin oxide)                                                    0.10

PROCEDURE: Add deionized water to suitable vessel at room
temperature. Add the disodium EDTA with mixing. Mix until the
dissolved. Add butylene glycol to batch, mix until uniform. Add
Fixate * Plus polymer to the batch with continuous mixing, then add
Avalure * AC 120 polymer. Mix until uniform. Add AMP-Ultra PC 2000
to batch to neutralize pH to 6.0-7.0. Mix until uniform. Add
alcohol to batch using gentle agitation. Phase B: In a separate
vessel, add ingredients 8-9 to solubilize. Add phase B to main
batch with continuous agitation. Mix until uniform. Add ingredients
10-11 to batch with continuous gentle agitation. Phase D: In a
separate vessel, combine ingredients 12-13 to solubilize. Add phase
D to batch with mixing. Mix until uniform. Add phase E ingredients
to batch with mixing. Mix until uniform. PROPERTIES:
Appearance--Green gel with sparkling mica; pH 6.0- 7.0; Viscosity
(mPa x s) 20,000 - 30,000 (Brookfield DV-II @ 20 rpm, 25[degrees]C,
#6 spindle, measured at 24 hours); Water/Sweat Resistance Style
Retention >70% (0.35 - 0.4 g of hair gel is applied on clean Virgin
European Brown tresses (~0.15 g of gel per gram of hair) Treated
tresses are laid flat between two Teflon coated plates and allowed
to dry overnight (50% RH - 25[degrees]C). Dried, treated tresses
are gently removed from the two Teflon coated plates rollers and
submerged in a sweat salts water solution for 5 seconds and adhered
at a 45[degrees] angle on a curl retention board. Initial (time =0)
tress height and 15 minute test height are recorded); High Humidity
Curl Retention 85% of original curl after 8 hrs & 24 hrs ;
Stability Passed 2 months @ 50[degrees], Passed 5 cycles freeze /
thaw; Recommended Packaging--Tube. COMMENTS: Due to the alcohol in
this formulation, it is recommended that customers review the
environmental and regulatory requirements of the states and
countries where they wish to market this type of product to be sure
that they are in compliance with local VOC regulations. Due to the
alcohol in this formulation, follow safety precautions appropriate
for the handling of flammable liquids.

Ultra Dry SPF 59 Sunscreen

Cognis Corporation
Care Chemicals North America
[phone] * www.cognis.com

INGREDIENTS:                                                   % WT.

Phase A
Eumulgin SG (Sodium stearoyl glutamate)                         1.00
Cutina PES (Pentaerythrityl distearate)                         2.00
Cetiol CC (Dicaprylyl Carbonate)                                5.00
Dimethicone                                                     2.00
  (UV filter, UV-B)                                             7.50
  (UV filter, UV-B)                                            10.00
  (UV filter, UV-B)                                             5.00
Homosalate                                                      5.00
Benzophenone-3                                                  6.00
Cosmedia DC (Hydrogenated dimer                                 1.00
  dilinoleyl/dimethylcarbonate copolymer)
Cosmedia SP (Sodium polyacrylate)                               0.60
Phase B
Water, demin.                                                  54.90
Perfume, preservative                                           q.s.

PROCEDURE: Heat phase A and B to 80-85[degrees]C separately. Add
phase B to phase A while stirring. Homogenize at 55-60[degrees]C.
Continue stirring while emulsion cools down to below 30[degrees]C.
Viscosity (Brookfield RVT, 23[degrees]C, spindle TE, 5 rpm,
Helipath): 129,000 mPas. COMMENTS: Recipe Number:
SC-US/161/537/70/1

Dry Shampoo

Corn Products International, Inc.
[phone] * www.farmalingredients.com

INGREDIENTS:                                                   % WT.

Phase A
Farmal CS 3757 (Corn Products) (Zea Mays (corn) starch)         70.0
Mackaderm Asto-Dry (McIntyre Group)                            10.00
  (Aluminum starch octenylsuccinate)
Silica                                                          5.00

Sodium carbonate                                                2.00
Fragrance, Preservative                                          q.s
                                                            to 100.0

PROCEDURE: Add components in order to a ribbon blender. Evenly
spray in the fragrance and preservative while blending. Blend until
completely homogeneous. Comment: This product is worked into the hair
and then brushed out. The powder will absorb the excess oils in the
hair.