Cognis' ageless beauty rejuvenating shampoo.

Here are product formulas supplied by producers of raw materials.

** Included in some instances are sources of supply for the raw materials and instructions for preparation and use of the finished product.

No guarantee of performance or safety is implied by Happi

** For more complete details, readers should contact the suppliers directly using the telephone number or website provided with each formula.

If your company has a formula that you think would be of interest to readers of Happi: marketers of soaps & detergents; cosmetics & toiletries; waxes & polishes; disinfectants & sanitizers and other chemical specialties, we will be pleased to consider it for publication. Address all material to:

Formulary Editor

Happi

70 Hilltop Rd.

Ramsey, NJ 07446 USA

Ageless Beauty Rejuvenating Shampoo

INGREDIENTS:                    % WT.

Phase A
Water, deionized                73.69
SoftCAT SK-H (Dow)               0.25
  (Polyquarternium 67)
Texapon N 70                     13.6
  (Sodium laureth sulfate)
Dehyton PK 45                     5.4
  (Cocamidopropyl betaine)
Lamesoft Care                     4.0
Cetiol LDO                        0.7
  (Dicaprylyl ether (and)
  lauryl alcohol)
Gluadin WLM                       0.5
  (Hydrolyzed wheat protein)
Perfume, preservative            q.s.
Sodium chloride                  1.86
pH-value (as is): 5.5
Viscosity (Brookfield RWT,
  23 [degrees]C, spindle 4
  speed 10 rpm): 7,900 mPas

MORE INFO:
Cognis GmbH, Can: Chemicals Division,
Rheinpromenade 1 D-4708.9 Monheim
Website: www.cognis.com

Against Fur
Growth Diminishing Body Lotion

INGREDIENTS:                    % WT.

Phase A
Eumulgin VL 75 (Cognis            4.0
  Group) (Lauryl glucoside
  (and) polyglyceryl-2
  dipolyhydroxystearate
  (and) glycerin)                 2.0
Lanette 22 (Cognis Group)
  (Behenyl alcohol)
Cegesott C24 (Cognis Group)       5.0
  (Ethylhexyl palmitate)
Cetiol Sensof (Cognis Group)      3.0
  (Propylheptyl caprylate)
Cegesoft PFO (Cognis Group)       3.0
  (Passiflora incarnata
  seed oil)
Cosmedia SP (Cognis Group)        0.8
  (Sodium polyacrylate)
DC 200-350 cts (Dow               1.0
  Corning) (Dimethicone)

Phase B
Water                           73.25
Glycerin                          5.0
Elestab CPN (Cognis Group)       0.20
  (Chlorphenesin)
Elestab PB Free LS 9842          1.00
  (Cognis Group) (Water
  (and) phenoxyethanol
  (and) glycerin (and)
  sorbic acid)
Keltrol CGT (Kelco)              0.25
  (Xanthan gum)
Eumulgin SG (Cognis Group)        0.4
  (Sodium stearoyl
  glutamate)

Phase C

Pilisoft LS 9760 (Cognis          1.0
  Group) (Water (and)
  pentylene glycol (and)
  gymnema sylvestre leaf
  extract)
Fragrance Yogurt aux fruits
  (Expressions Parfumees)        0.10

PROCEDURE: Heat the oil phase A to to 75-80[degrees]C
and mix homogeneously. Heat phase B to 75-80[degrees]C
and add to the oil phase while stirring.
Allow the emulsion to cool while stirring in such
a way that it remains in continual motion. Avoid
incorporation of air. If necessary homogenize
with a suitable dispersion unit (e.g. Ultra Turrax)
approx. 55[degrees]C. Add phase C below 40[degrees]C with
mixing. Stir while cooling until room temperature.

pH value: 6.0
Viscosity (mPas) 5.600 Brookfield RVT, 23[degrees]C
(spindle 5, 10 rpm)

MORE INFO:
Laboratoires Serobiologiques, Cognis France, 60 rue du fbg
Poissonni,re 75010 Paris France Tel: [phone],
Website: www.laboratoires-serobielogiques.com

Mommy n' Me Bubbly Amide-Free
Baby Shampoo

INGREDIENTS:                      % WT.

Phase A
Deionized water                   60.29
Protachem NA2 (Protameen)          0.20
  (Disodium EDTA)
Glucquat 125 (Noveon)              0.10
  (Lauryl methyl
  gluceth-10 hydroxypropy
  idimonium chloride)
Sulfochem TD-3 (Noveon)           10.00
  (Sodium trideceth
  sulfate (30%)
Atlas G-4280 (Unigema)             8.00
  (PEG-80 sorbitan laurate)
Chembetaine C (Noveon)            11.50
  (Cocamidopropyl
  betaine (35%))
Miranol HMA (Rhodia)               4.00
  (Sodium lauroamphoacetate
  (40%))
Glucamate LT (Noveon)              5.50
  (PEG-120 methyl glucose
  trioleate, popylene glycol,
  water (40% Active))
Glydant Plus Liquid (Lonza)        0.40
  (DMDM hydantoin (and)
  iodopropynyl butylcarbamate)
Citric acid (50%)                  0.01 *

PROCEDURE

In a suitable vessel, dissolve EDTA in deionized
water. Add ingredients 3-7 to the batch
slowly, one at a time, with mixing. Mix batch
slowly at about 200 rpm while heating to 70[degrees]C.
Mix until uniform. When batch is uniform and
at 70[degrees]C, add Glucamate LT Thickener and mix
at 400 rpm for 5-10 minutes. Reduce mixing
speed to 200 rpm and allow batch to cool. Add
ingredient 9 when temperature reaches 40[degrees]C.
Adjust pH with citric acid to 5.8-6.2. Adjust
final viscosity with sodium chloride if necessary.

PROPERTIES:

Appearance              Clear viscous liquid
p H                                 5.8-6.2
Viscosity (mPa.s) **            3,500-6,500
Turbidity (NTU) ***                     0-6
Stability:                Passed 3 months @
                              45[degrees]C,
                            passed 5 freeze
                              / thaw cycles

* typical amount, q.s. to pH 5.8-6.2.

** Brookfield RVT @ 20 rpm, 25[degrees]C, #5 spindle,
   measured after 24 hours

*** HF Scientific, Inc., Micro 100 Turbidimeter

MORE INFO:
Noveon Consumer Specialties, 991 Brecksville Road Cleveland,
OH 44141-3247, Tel: [phone]
Fax: [phone], Website: www.personalcare.noveon.com

By Nature Leave-in Conditioner

INGREDIENTS:                       % WT.

Phase A
PPG-3 myristyl ether                1.0
Dow Corning HY-3051 (Soy            5.0
  wax blend) (Hydrogenated
  soybean oil (and)
  hydrogenated soybean
  polyglycerides (and)
  C15-23 alkane)
Water                              89.3
Dow Corning RM 2051                 1.0
  (Sodium polyacrylate (and)
  dimethicone (and)
  cyclopentasiloxane (and)
  trideceth-6 (and) PEG/PPG-18/
  18 dimethicone)

Phase B
Dow Corning HMW 2220                3.3
  Nonionic Emulsion
  (Divinyidimethicone/
  dimethicone copolymer
  (and) C12-13 Pareth-3
  (and) C12-13 Pareth-23)
Glydant Plus (Lonza)                0.4
  (DMDM hydantoin)

PROCEDURE:
Mix Phase A ingredients in the order listed.
Increase mixer speed as the mixture thickens.
Add Phase B to Phase A and mix until homogeneous.

MORE INFO:
Dow Coming Corporation, Midland, MI, Tel: (989)
496-6000; Fax: [phone] [e-mail],
Website: www.dowcorning.com/content/personal/

Sulfate-Free Conditioning Shampoo

INGREDIENTS:                      % WT.

Phase,4
Sodium C14-16 olefin sulfonate     40.0
Cocamide MEA                        5.0
Glycol distearate                   1.5
4 Farmal HFS 2656 (Corn            10.0
  Products Intl.)
  (Hydrolyzed corn starch)
Ecopol 14U (Economy                 0.8
  Polymers)
  (Guar hydroxypropyltrimonium
  chloride)
Citric acid to pH 6.0-6.5          q.s.
Water, dye, fragrance,
  preservative                 to 100.0

PROCEDURE:

Disperse Ecopol 14U in water at room temperature.
Blend for 30 minutes and heat to 40[degrees]C.
Add Sodium C14-16 olefin sulfonate, cocamide
MEA and glycol distearate. Heat to
70[degrees] and hold until all the EGMS is melted.
Cool to 50[degrees]C and add Farmal HFS 2656. Add
dye, preservative and fragrance. Cool to 35[degrees]C
and adjust pH with citric acid. Cool and fill.

MORE INFO:
Corn Products International, Inc., 5
Westbrook Corporate Center, Westchester, IL 60154
[phone], Website: www.farmalingredients.com

Kitchen/Restaurant Degreaser

INGREDIENTS:                      % WT.

Water                                84
TKPP (Tetrapotassium                8.0
  pyrophosphate)
Rewoquat CQ 100                     8.0
Ready-to-use dilution: 1-3%

PROCEDURE:
Dissolve TKPP and blend Rewoquat
CQ 100 while stirring

MORE INFO:
Evonik Goldschmidt Corporation, 710 S. 6th Avenue,
Hopewell, VA 23860 Tel: [phone]; Fax: (804)
541-8689; Website: www.degussa-household-care.com

Premium Mid Nature-Based Shampoo

INGREDIENTS:                     % WT.

Phase A
Water (deionized)               to 100
RTD Coco-sulfate (HallStar)        9.99
  (sodium coco-sulfate)
HallStar PEG 6000 DS C             1.00
  (HallStar) (PEG-150
  distearate)

Phase B
Alkamuls PSML-80/72%               5.05
  (Rhodia) (PEG-80
  sorbitan laurate)
Mirataine BET-C 30 (Rhodia)       20.05
  (cocamidopropylbetaine)

Phase C
Citric acid (50% aqueous])         0.22

Phase D
CoSept 200 (HallStar)              0.15
Fragrance                          q.s.
Dye(s)                             q.s.

PROCEDURE:
Combine phase A, heating to 60[degrees]C (140[degrees]F) with
mixing. When phase A is a completely homogeneous.
solution add phase B with continued mixing.
Cool to 30[degrees]C (86[degrees]F) and then adjust
pH to 6.3-7.3 with phase C. Add phase D sequentially
and continue mixing until clear and homogeneous.

COMMENTS
This stability tested nature-based formulation
makes use of a primary surfactant selected for
high foaming and secondary surfactants included
for irritancy reduction and viscosity enhancement
to yield a shampoo with near Newtonian rheology
for an exceptionally rich feel during application.
The concentration of HallStar PEG 6000 DS C
may be modified to proportionately adjust finished
product viscosity. As presented, the viscosity
(RVTD, 5 to 100 rpm) is ~2400 cP at 25[degrees]C.

MORE INFO:
The HallStar Company, Chicago, IL, [phone], (312)
385-4494 Fax: [phone], E-mail: [e-mail],
Website: www.hallstar.com

Body Wash with Lipospheres

INGREDIENTS:                      % WT.

Phase A
Deionized water                   48.69
Disodium EDTA (Ruger               0.10
  Chemical Co.)
Carbopol Aqua SF-1 (Noveon)        7.50
  (Acrylates copolymer)

Phase B
Sodium Laureth-2 Sulfate          32.00
  (Sodium laureth sulfate)

Phase C
NaOH (18% sol.) (Ruger             1.20
  Chemical Co.) (Sodium
  hydroxide)

Phase D
Velvetex BK-35                     8.00
  (Cocamidopropyl betaine)

Phase E
Lipo Polygycol 400 (Lipo           0.50
  Chemicals, Inc.) (PEG-8)
Uvinul MS-40 (BASF)                0.01
  (Benzophenone-4)
LiposerveTM PP (Lipo               0.50
  Chemicals, Inc.)
  Phenoxyethanol (and)
  methylparaben (and)
  ethylparaben (and)
  butylparaben
  propylparaben (and)
  isobutylparaben)
Liposphere Green 0263              1.50
  (Lipo Chemicals)
  (Sunflower oil (and)
  vitamin E (and) vitamin A
  (and) agar)

PROCEDURE:
In main kettle, weigh out the water; begin mixing
with propeller agitation. Add Disodium
EDTA to main kettle, followed by Aqua SF-1,
and sodium laureth sulfate, Continue mixing.
Neutralize to pH 6.6 with NaOH solution. Add
remaining ingredients slowly making sure not
to incorporate air. Mix until batch is homogeneous.

MORE INFO:
Lipo Chemicals, Inc., 207 Nineteeth Ave., Paterson, NJ
(973) 3d5-8600, Fax [phone],
Website: www:lipochemicals.com

After Sun Body Lotion

INGREDIENTS:                      % WT.

Phase A
Amphisol A (DSM Nutritional        0.84
  Products) (Cetyl phosphate)
Estol 3650 (Unigema)               4.00
  (Glyceryl myristate)
Lanette 16 (Cognis)                1.00
  (Cetyl alcohol)
Eutanol G (Cognis)                 2.00
  (Octyldodecanol)
Cetiol LC (Cognis)                 3.00
  (Coco-caprylate/caprate)
Dow Corning 200/350 cs             2.00
  (Dow Corning)
  (Dimethicone)
Phenonip (Clariant)                0.80
  (Phenoxyethanol and              and
  methylparaben ethylparaben
  and butylparaben and
  propylparaben
  and isobutylparaben)

Phase B
Carhopol Ultrez 21                 0.10
  (Noveon, Inc.) (Acrylates/
  C10-30 alkyl acrylate
  crosspolymer)
1,2-Propanediol(Fluka Chemie)      5.00
  (Propylene glycol)
Edeta BD (BASF)                    0.10
  (Disodium EDTA)
Water dem.                        79.81
BeauPlex VH (DSM Nutritional       1.00
  Products) (Niacinamide
  and sodium starch octenyl
  succinate and calcium
  pantothenate and
  maltodextrin and sodium
  ascorbylphosphate
  and tocopherylacetate and
  pyridoxine HCI and silica)
Allantoin                          0.10
  (DSM Nutritional Products)

Phase C
Potassium hydroxide                0.25
  (Merck KGaA)

PROCEDURE:
Heat phase A to 85[degrees]C while stirring. Pre-heat
phase B to 55[degrees]C and add phase A while stirring
and homogenizing the emulsion. Cool down to
35[degrees]C and add phase C. It is highly
recommended to remove oxygen as careful as possible by
using vacuum while producing the product.

pH: 7.20
Viscosity: 3920 cps (Brookfield, RV 5, 10 rpm)

MORE INFO:
DSM Nutritional Products, 45 Waterview Blvd.,
Parsippany, NJ 07054 {973) 257-8501, fax: (973)
257-8580, Website: www.nutraaccess.com