Coating for easy release applications.

Product formulations are supplied by producers of raw materials. Included in some instances are sources of supply for the raw materials and instructions for preparation and the use of the finished product. No guarantee of performance or safety is implied by Coatings World. For more complete details, readers should contact the supplier directly at the address given with each formula.

If your company has a formula that you think would be of interest to readers of Coatings World: manufacturers of paints, coatings, adhesives and sealants, we will consider it for publication. Send submissions to Coatings World magazine by email: [e-mail], fax: [phone] or mail, Coatings World, Formulary Editor, 70 Hilltop Road, Ramsey, NJ 07446 USA.

TYPICAL COATING FOR EASY RELEASE APPLICATIONS
(based on free radical chemistry)

INGREDIENT                    PERCENTAGE

Tego RC 711                       30
Tego RC 902                       70
Tego Photoinitiator A-17         1.5

Total:                         101.5

Mix the three components together until homogeneous in color and apply.

Typical release values: 8 to 15 gms/inch.

Goldschmidt Chemical Corporation supplies radiation curable silicones
used for release coating in the pressure sensitive adhesive market.
Both free radical and cationic chemistries are available from
Goldschmidt.

More info: Degussa--Goldschmidt Chemical Corporation--RC Silicones Tel: [phone] * Fax: [phone] * Web Site: www.tego-rc.com