Co-extrusion tooling.The Series 220 co-extrusion die is specially engineered as co-extrusion tooling for producing advanced profiles and seals in combinations of materials, including rubber and other thermosets thermosets, materials that can not be softened on heating. In thermosetting polymers, the polymer chains are joined (or cross-linked) by intermolecular bonding. Thermosets are usually supplied as partially polymerized or as monomer-polymer mixtures. , as well as various types of thermoplastic A polymer material that turns to liquid when heated and becomes solid when cooled. There are more than 40 types of thermoplastics, including acrylic, polypropylene, polycarbonate and polyethylene. used for aerospace, automotive and construction products. The Series 220 tooling can extrude extrude /ex·trude/ (ek-strldbomacd´) 1. to force out, or to occupy a position distal to that normally occupied. 2. in dentistry, to occupy a position occlusal to that normally occupied. product sizes of 1/2" (1.27 cm) to 2-1/2" (6.34 cm). A key money saving technical advantage of the 220 Series is said to be that it offers simultaneous directed material flow for a single product or multiple families of products that have the same, identical material requirements, yet must be extruded in different end use sizes. A unique design configuration is said to allow the extruded material to pass through the Series 220 tooling and prevents compound degradation, as well as stagnation Stagnation A period of little or no growth in the economy. Economic growth of less than 2-3% is considered stagnation. Sometimes used to describe low trading volume or inactive trading in securities. Notes: A good example of stagnation was the U.S. economy in the 1970s. in the die. The material flow can be directed to various areas of the substrate in order to create a more precise end-product, according to according to prep. 1. As stated or indicated by; on the authority of: according to historians. 2. In keeping with: according to instructions. 3. the company. All flow passages are said to be specially designed using 3D/CAD and proprietary flow analysis software, according to the manufacturer. (Guill Tool & Engineering) Circle 100 on card |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion