Clamp system.Magnetic mold clamping systems are designed specifically for the high temperatures of rubber injection molding machines Injection molding machine (also known as injection press) - a machine for making plastic parts. Manufacturing products by injection molding process. Consist of two main parts, an injection unit and a clamping unit. . The long pole technology uses double magnets to provide up to 20% more clamping force. The magnetic systems offer quick change of different size molds in a one minute changeover (programming) changeover - The time when a new system has been tested successfully and replaces the old system. . The M-TECS system withstands high temperatures up to 210[degrees]C (410[degrees]F) and is specifically made for rubber injection molding injection molding n. A manufacturing process for forming objects, as of plastic or metal, by heating the molding material to a fluid state and injecting it into a mold. applications. A separate system is also available for lower temperature plastic injection molding machines. Electrical power is required for only two seconds to unclamp. Permanent magnets permanent magnets, n.pl magnets containing the mineral boron and the rare earth metal neodymium; often combined to create a neoprene or ceramic entity. mean clamp capacity is not affected by any power loss. Hilma, Div. of Carr Lane Roemheld Circle 18 on card |
|
||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion