Carbon Design Systems Repeats Webinar on Automatic Model Creation for ARM RealView SoC Designer.

October 30 Tutorial Will Offer Techniques for Speeding Hardware Modeling, Debug

WALTHAM, Mass. -- Carbon Design Systems

Who: Carbon Design Systems[TM], the leading supplier of tools for the automatic creation, validation and deployment of virtual hardware models.

What: Will host a 45-minute webinar on how to use automatic model generation with RealView[R] System on Chip (SoC) Designer from ARM[R].

Software developers, hardware architects and firmware designers will learn how to develop hardware-accurate models, accelerate the execution of a virtual platform and concurrently debug real software against a model of the actual hardware implementation.

When: Tuesday, October 30, at 2 p.m. E.D.T. (11 a.m. P.D.T.)

Where: Online webex webinar through web browser.

Webinar Registration:

http://www.carbondesignsystems.com/events_webinars.shtml

About Carbon Design Systems

Carbon is the leading supplier of system-level tools to automatically create, validate and deploy software models generated from Verilog and/or VHDL descriptions. Carbon's models are used in conjunction with SystemC simulation platforms to enable architecture profiling and software validation in parallel with hardware development. Problems can be found and resolved early in the design cycle, rather than waiting for prototypes to be built or silicon to be delivered. Its solutions are based on open industry standards, including SystemC, SCML, Verilog, VHDL, OSCI TLM, MDI, CASI, CADI and CAPI. Carbon's customers are systems, semiconductor, and IP companies that focus on communications, networking, and consumer electronics. Carbon is headquartered at 375 Totten Pond Road, Waltham, Mass., 02451. Telephone: [phone]. Facsimile: [phone]. Email: [e-mail]. Web site: www.carbondesignsystems.com.

Carbon Design Systems is a trademark of Carbon Design Systems Inc. Carbon acknowledges trademarks or registered trademarks of other organizations for their respective products and services.