Carbon Design Systems' Repeats Popular Webinar on Automatic Model Creation for ARM RealView SoC Designer March 27.

Meant for Software Developers, Hardware Architects, Firmware Designers Who Will Learn Techniques for Speeding Hardware Modeling, Debug

ACTON, Mass. -- Carbon Design Systems

Who: Carbon Design Systems[TM], the leading supplier of tools for the automatic creation, validation and deployment of virtual hardware models

What: Will offer a 45-minute webinar on the use of automatic model generation with the ARM[R] RealView[R] SoC Designer tool.

Software developers, hardware architects and firmware designers will learn how to concurrently debug hardware and software in an ARM processor-based device by plugging accurate models of hardware directly into the RealView SoC Designer environment.

When: Thursday, March 27, at 2 p.m. E.S.T (11 a.m. P.S.T.)

Where: Online WebEx webinar through web browser.

Webinar Registration:

http://www.carbondesignsystems.com/events_webinars.shtml

About Carbon Design Systems

Carbon is the leading supplier of system-level tools to automatically create, validate and deploy software models generated from Verilog and/or VHDL descriptions. Carbon's models are used in conjunction with SystemC simulation platforms to enable architecture profiling and software validation in parallel with hardware development. Problems can be found and resolved early in the design cycle, rather than waiting for prototypes to be built or silicon to be delivered. Its solutions are based on open industry standards, including SystemC, SCML, Verilog, VHDL, OSCI TLM, MDI, CASI, CADI and CAPI. Carbon's customers are systems, semiconductor, and IP companies that focus on communications, networking, and consumer electronics. Carbon is headquartered at 125 Nagog Park, Acton, Mass., 01720. Telephone: [phone]. Facsimile: [phone]. Email: [e-mail]. Web site: www.carbondesignsystems.com.

Carbon Design Systems is a trademark of Carbon Design Systems Inc. Carbon acknowledges trademarks or registered trademarks of other organizations for their respective products and services.