CBL Systems Introduces the IQ1000C Gigabit Copper Ethernet Smart Switch at ISC West Expo.LAS VEGAS Las Vegas (läs vā`gəs), city (1990 pop. 258,295), seat of Clark co., S Nev.; inc. 1911. It is the largest city in Nevada and the center of one of the fastest-growing urban areas in the United States. -- CBL Cbl cobalamin. Systems, a supplier of Gigabit Ethernet An Ethernet standard that transmits at 1 Gbps. Used mostly to connect high-end workstations and servers as well as for network backbones, Gigabit Ethernet transmits full duplex from point to point using switches and half duplex in a shared environment (CSMA/CD) using a hub. and LonWork systems, today introduced the IQ1000C Copper Quasar Self-Managed Ethernet Smart Switch System at the ISC (1) (Internet Systems Consortium, Redwood City, CA www.isc.org) An organization founded by Paul Vixie, Carl Malamud and Rick Adams in 1994 and later sponsored by UUNET and other Internet companies. West Expo, a leading trade show for the Security Industry. The IQ1000C will be demonstrated at the CBL Systems booth # 39000. The IQ1000C copper Smart Switch is designed to provide a low-cost, redundant, self-managed Cat5e/Cat6 Gigabit switch for Ethernet applications. CBL's IQ1000C Copper Smart Switch System provides the industry's only virtual "plug-and-go", self-managed, Gigabit solution for reliable performance with sub-second recovery for mission critical applications. "Our IQ1000C is designed utilizing the Intelligent Quasar technology platform offered in our Optical IQ Self-Managed Smart Switch products, providing a ubiquitous solution for networks that either deploy both fiber and copper transport facilities within the same network or for those legacy networks converting to IP networks" said Joe Burke, President of CBL Systems. "The IQ1000C offers network designers the ability to upgrade from a non-IP legacy network to an IP network utilizing the existing Cat 5e/Cat6 cable structure. The easy to install self-managed "plug-and-go" solution greatly simplifies the engineering, installation, provisioning and maintenance by eliminating the requirement to configure See configuration. (software) configure - A program by Richard Stallman to discover properties of the current platform and to set up make to compile and install gcc. Cygnus configure was a similar system developed by K. the system at the node location or at the data center resulting in a low cost of network upgrade". The IQ1000C provides a redundant Gigabit Cat5e/Cat6 ring backbone. Ethernet appliances such as video cameras, digital recorders See DVR and CD-R. , and control devices interface the network through one of the available RJ-45 ports. The IQ1000C adapts by auto-negotiating to 10/100/1000 Mbps based on the requirement of the Ethernet appliance. In the event of either a cable break or loss of power the system will automatically re-configure within milliseconds of the interruption INTERRUPTION. The effect of some act or circumstance which stops the course of a prescription or act of limitation's. 2. Interruption of the use of a thing is natural or civil. . The IQ1000C also provides a RS232/RS422/RS485 interface to connect a serial device for PTZ PTZ Pan-Tilt-Zoom (camera) PTZ Pentylenetetrazol PTZ Photo Zenith Tube PTZ Poisson Truncated At Zero Model PTZ Point Zero controls, broadcast applications and for legacy applications. Key Product Features: -- Self-managed network based on patent-pending Quasar technology -- Cat5e/Cat6 Gigabit backbone -- Full Gigabit capability operating up to 300 ft (100m) on all RJ-45 points -- IQ1000C is ubiquitous with the IQ1000 optical smart switch products -- RS232/422/485 serial port for PTZ controls, broadcast and legacy equipment -- Industrial grade reliability Additional information on Intelligent Quasar Technology is available in a white paper titled "Implementing Self-Managed IP-based Ethernet Ring Networks" at www.cblsystems.com. About CBL Systems CBL Systems, Milford, MA designs and manufactures Ethernet and LonWork Systems for customer networks around the world. CBL Systems' patented Ethernet and Lon solutions provide reliable transport of data and video for mission critical applications to the Security, Building Automation, Access Control, Intelligent Transportation and Industrial Ethernet Industrial Ethernet is the name given to the use of the Ethernet protocol in an industrial environment, for automation and production machine control. Until recently, a PLC (Programmable logic controller) would communicate with a slave machine using one of several possible markets. |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion