Blaze DFM to Participate in EDSFair 2007.Blaze DFM DFM Design for Manufacturing (newsletter) DFM Design for Manufacturability DFM Dubai Financial Market DFM Delphi Form (computer filename extension) DFM Distinguished Flying Medal DFM Diesel Fuel Marine : What: < Electronic Design and Solution Fair 2007 When: < January 25-26, 2007 Where: < Pacifico Yokohama (Exhibition Hall, Annex Hall), Kanagawa, Japan Blaze DFM, the electrical DFM company, will have a presence in both the Itochu Techno-Solutions Booth #104 and the Semiconductor Technology Academic Research Center (STARC STARC Semiconductor Technology Academic Research Center (Japan) STARC State Area Command STARC Student Alliance to Reform Corporations STARC Somerset Tackling Alcohol Related Crime STARC St. Albans Amateur Radio Club (St. ) Booth #606 at the Electronic Design and Solution Fair, this Thursday and Friday, January 25-26, 2007 at the Pacifico Yokohama Pacifico Yokohama (パシフィコ横浜) is a convention center in Japan located in the western region of Minato Mirai Nishi-ku Yokohama, Kanagawa Prefecture. venue in Kanagawa, Japan. EDSFair is one of the three largest trade shows in the world in the field of semiconductor and electronic system design, showcasing specialized information on advanced device technologies including EDA (1) (Electronic Design Automation) Using the computer to design, lay out, verify and simulate the performance of electronic circuits on a chip or printed circuit board. , ASICs, FPGA/PLDs, IP re-usage, embedded software Instructions that permanently reside in a ROM or flash memory chip. Embedded software may be immediately available to the CPU or, for faster execution, may be transferred to RAM first and then executed. and design services. The latest trends and targets for further development of electronics technologies will also be featured. In this spirit, Blaze DFM's CEO (1) (Chief Executive Officer) The highest individual in command of an organization. Typically the president of the company, the CEO reports to the Chairman of the Board. , Jacob Jacobsson, will be on hand in the Itochu Techno Solutions and STARC booths to talk about the company being chosen by STARC to provide leakage power optimization software that will be integrated into the STARCAD-CEL 1.0 reference design flow. Please see http://biz.yahoo.com/bw/070122/20070122005733.html?.v=1 for more information about STARC's selection of Blaze MO leakage power optimization software. STARC qualifies new design technologies for its shareholder companies including many of the largest semiconductor companies in Japan, http://www.starc.jp/about/profile-e.html. For more information about Blaze DFM, please visit the company's web site, http://www.blaze-dfm.com. |
|
||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion