Blade pins need more curing time.IN PS 633, PAGE 35, WE TOLD YOU THAT BLACK HAWK Black Hawk (born 1767, Sauk Sautenuk, Va.—died Oct. 3, 1838, village on the Des Moines River, Iowa, U.S.) Sauk Indian leader. Long antagonistic to whites, Black Hawk was driven into Iowa from Illinois in 1831. BLADE PINS NEED SIX HOURS CURING TIME In the annealing procedure could be divided into 3 stages:heating to a particular temperature, keeping for a period of time and cooling to room temperature. The curing time is the hold time of the 2nd stage. AT THE 500-HOUR PHASE MAINTENANCE, ACCORDING TO according to prep. 1. As stated or indicated by; on the authority of: according to historians. 2. In keeping with: according to instructions. 3. THE INSTRUCTIONS ON THE SOLID FILM LUBRICANT CAN. [ILLUSTRATION OMITTED] HOWEVER THAT CONFLICTS WITH WP 0542 00 OF TM 1-1520-237-23-3, WHICH SAYS TO AIR-DRY BLADE PINS FOR 12 HOURS. THE TM TAKES PRECEDENCE. SO CURE THEM FOR 12 HOURS. MECHANICS CAN SPEED THE PROCESS BY AIR-DRYING THE PINS FOR 30 MINUTES, AND THEN DRYING 30 MINUTES MORE AT 150 DEGREES IN THE AVIM SHOP'S HEAT TREATING OVEN, NSN NSN National Stock Number NSN Nokia Siemens Networks NSN National Storytelling Network NSN NATO Stock Number NSN New Substances Notification (CEPA) NSN National Student Number (NZ) NSN Never Say Never 3424-01-507-7007, SUPPLIED IN THE AVIM SHOP SET. DO THIS, AND YOU'RE DONE. [ILLUSTRATION OMITTED] AS A NOTE, BLACK HAWKS ARE NOW ON A SPLIT PHASE MAINTENANCE OF 350/700 HOURS. [ILLUSTRATION OMITTED] |
|
||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion