Better wheels for GMTX.

The toolbox wheels for the general mechanics tool kits (GMTK) and multi-capable maintainers tool kit (MCMTK) have been breaking when the toolbox is rolled over rough ground. Then broken wheels make it a chore to move the toolbox to a new spot.

Good news! There are sturdier wheels available for the toolbox. The wheels have these improvements:

* harder and more durable

* larger diameter, which increases stability and ground clearance

* sealed bearings, which keep out sand and dirt

* wheel brackets spaced farther apart, which helps stability

* stronger brackets that can better withstand jolts and bumps 

If your toolbox's wheels or the wheels' bracket has broken because they're defective, you can get new wheels for free by filing a warranty claim:

http://pmskot.army.mil 

You will need the wheels' part number GMTKWHEELS2.4, your DODAAC, shipping address, email, and a brief explanation of what happened to the wheels or bracket.

If you have questions about how to file a claim, call [phone] or email:

[e-mail]

If your toolbox wheels haven't broken but you would like the new wheels, order the wheels directly from Kipper Tools by calling [phone]. The wheels cost $25 a pair.

Here's on how to put on a the new wheels:

1. Remove old wheels and brackets from the tool box.

2. Stick the template that comes with the new wheels on the wheel mount fin.

3. Mark the center of each of the five holes on the template.

4. Drill a 1/4-in diameter hole at each marked spot. The holes will not weaken the toolbox.

5. Align the mounting screws provided with the new wheel bracket with the holes. Place the wheel bracket firmly against the wheel mount fin and press the fasteners through the holes. Secure the fasteners with the flat washers, lock washers and nuts that come with the bracket.