Beraca ingredients offers detangling hair fluid.

Here are product formulas supplied by producers of raw materials.

Included in some instances are sources of supply for the raw materials and instructions for preparation and use of the finished product.

No guarantee of performance or safety is implied by Happi.

For more complete details, readers should contact the suppliers directly using the telephone number or website provided with each formula.

If your company has a formula that you think would be of interest to readers of Happi: marketers of soaps & detergents; cosmetics & toiletries; waxes & polishes; disinfectants & sanitizers and other chemical specialties, we will be pleased to consider it for publication. Address all material to:

Formulary Editor

Happi

70 Hilltop Rd. Ramsey, NJ 07446 USA</p> <pre> Detangling Hair Fluid INGREDIENTS: %WT. Phase A Demineralized water q.s Arlasilk Phospholipid PLN

1.00 (Uniqema/Beraca Ingredients) (Linoleamidopropyl PG-dimonium chloride phosphate dimethicone) Stilb Touch HDE (Beraca Ingredients) 2.00 (Water [and] linoleamidopropyl PG-dimonium chloride phosphate dimethicone [and] polyquaternium-10 [and] quillaja saponaria molina) Cetrimonium chloride (Clariant) 0.80 Germall 115 (ISP) 0.30 (Imidazolidinyl urea) Phase B Tween 20 3.00

(Uniqema/Beraca Ingredients) (Polisorbate 20) Arlasolve 200 L/G

4.00 (Uniqema/Beraca Ingredients)

(Isoceteth- 20) Arlatone 0.80 (Uniqema/Beraca Ingredients) (PEG 40 sorbitan peroleate) Fragrance 0.10 Beracare ARS hair system 0.50 (Beraca Ingredients) (Passiflora edulis seed oil (and) oriza rice bran oil (and) euterpe oleracea pulp oil) PROCEDURE: Prepare phase A, mixing components one by one, following the listed order. Prepare phase B and add it to phase A. Homogenize until complete solubilization. </pre> <p>MORE INFO:

Beraca Ingredients, Av Juscelino Kubitscheck de Oliveira, 878, cep 13457-190, Santa Barbara D'Oeste, SP, Brazil; Tel: [phone]; Fax: [phone] E-mail: [e-mail]; Website: www.beraca.com.br</p> <pre> Frequent Use Liquid Hand Soap INGREDIENTS:

% WT. Water

71.6 Colonial ALES-60 10.0 Hamposyl L-30 10.0 Cola Mid AL

3.0 Cola Moist 200 2.5 Colonial Monolaurin 2.0 Liquipar PE

0.2 Versene 100 0.5 Fragrance

0.2 PROCEDURE: Heat water and Colonial Monolaurin with stirring until uniform. Add remaining ingredients in order given with continual stirring. When homogeneeous, cool to room temperature using slow sweep agitation. PROPERTIES: Appearance: Clear viscous liquid pH (10% in water): 7.0 with citric acid Activity: 4% </pre> <pre> Body Infusing Conditioner for Curly Hair INGREDIENTS:

%WT. Water, soft

q.s. Mackamer 400DS 1.0 (Hydroxypropyl guar) Mackconditioner Essential 7.0 (Cetearyl alcohol [and] stearamidopropyldimethylamine [and] stearamidopropalkonium

chloride) MackproPlus Silk-C 4.0 (Cocodimonium hydruxypropyl hydrolyzed silk) Citric acid

q.s. Mackstat DM 0.4 (DMDM Hydantoin) Fragrance, dye q.s. PROCEDURE: Add Mackamer 400DS to water. Allow to mix. Heat to 70[degrees]C. Add Mackconditioner Essential. Mix well. Cool to 45[degrees]C-50[degrees]C. Add MackproPlus Silk-C, Add Mackstat DM, fragrance and dye. Adjust pH with citric acid. PROPERTIES: pH (as is): 3.5-5.0 Viscosity @25[degrees]C, cps: 12,000-20,000 Appearance @25[degrees]C: Off white, opaque liquid Solids, %: 8-10 Freeze/thaw, 3 cycles: Pass 43[degrees]C Stability (1 month): Pass 4[degrees]C Stability (1 month): Pass </pre> <p>MORE INFO:

McIntyre Group, Ltd., 24601 Governors Highway, University Park, IL 60466 Tel: [phone]; Fax: [phone] E-mail: [e-mail]; Website: www.mcintyregroup.com</p> <pre> UV Guard Creme Spray INGREDIENTS:

% WT. Phase A Deionized water

55.10 Structure*XL 4.00

(Hydroxypropyl starch phosphate) Atlas G-2330

3.00 (Sorbeth-30) Germahen II-E

1.00 (Propylene glycol [and] diazolidinyl urea [and] methylparaben [and] propylparahen) Phase B Dermacryl* AQF (45% soln.)

4.40 (Acrylates copolymer) Phase C Prisorine 3515

3.00 (Isostearyl alcohol) Neo Heliopan AV

7.50 (Ethylhexyl methoxycinnamate) Neo Heliopan OS 5.00 (Ethylhexyl salicylate) Neo Heliopan BB 6.00 (Benzophenon3-3) Finsolv TN

4.00 (C12-15 alkyl benzoate) Elefac 1-205 3.00 (Octyldodecyl neopentanoate) Tween 80 1.94 (Polysorbate-80) Span 80 2.06 (Sorbitan oleate) PROCEDURE: Hydrate Structure XL polymer for 20 minutes. Add Atlas G-2330 and Germben II-E. Mix for 20 minutes. In a separate beaker, combine all ingredients in phase C and mix until homogeneous. Add phase B to A and allow to mix for 10 minutes. Add Phase C to phase AB and mix well. PROPERTIES: Viscosity: 4020 cps (Brookfield DV-I #4, 20 rpm) pH: 5.75 </pre> <p>MORE INFO:

National Starch Personal Care, 10 Finderne Ave., Bridgewater, NJ 08807 Tel: [phone]; Fax: [phone] E-mail: [e-mail]; Website: personalcarepolymers.com</p> <pre> Cleansing Wipe Concentrate INGREDIENTS: %WT. Phase A Deionized water

57.69 Glycerin

8.00 Propylene glycol 2.50 Dipropylene glycol 1.50 Sodium lauroyl sarcosinate

13.33 (30% active) Ammoniun lauryl sulfate

13.33 (28% active) SoftCAT polymer SK-L 0.25 (Polyquaternium-67) Phase B Mineral oil

2.00 Stearyl alcohol 0.50 Cetyl alcohol 0.50 Phase C DMDM hydantoin

0.40 Fragrance

q.s. PROCEDURE: Disperse the SoftCAT SK-L in rapidly agitating, room temperature water. Allow to disperse completely. Once the polymer is dispersed, heat the solution to 60-65[degrees]C until clear. Add the sodium lauroyl sarcosinate, ammoniun lauryl sulfate, glycerin, propylene glycol and dipropylene glycol to the polymer solution, one at a time, in order, waiting for uniformity before adding the next. Heat entire formulation to 6065[degrees]C. In a separate container, combine the ingredients of phase B. Heat the ingredients to 60-65[degrees]C until the fatty alcohols are dissolved. At temperature, add the contents of phase B to Phase A with good agitation. Mix thoroughly while cooling at 45[degrees]C. Add the DMDM hydantoin and fragrance. Impregnate cloths with concentrate as desired. </pre> <p>MORE INFO:

Amerchol Corporation, a subsidiary of Dow Chemical Tel: [phone]; Fax: [phone]; Website: www.amerchol.com</p> <pre> Regenerative Gel with Preregen INGREDIENTS: % WT. Phase A Deionized water 79.50 Glycerin

3.00 Phenonip 0.30 Imidazolidinyl urea 0.20 Glucam P-10

4.00 (PPG-10 methyl glucose ether) Carbopol Ultrez 10 (Carbomer) 1.00 Phase B Deionized water

5.00 Triethanolamine 1.00 Phase C Preregen (Ceoterchem, Pentapharm) 5.00 (Soybean [glycine soya] protein,

oxido reductases) Phase D Solubilizer $12 0.80 (Nonoxynol-14) Fragrance 0.20 (Parafex 52255) PROCEDURE: Dissolve all items in phase A in water. For thickening and neutralization add phase 8. Add phase C to the gel and finally incorporate phase D to the mix. </pre> <p>MORE INFO:

Centerchem, Inc., 20 Glover Ave., Norwalk, CT 06850 Tel: [phone]; E-mail: [e-mail]; Website: www.centerchem.com

SPF Water-Resistant Sunscreen

INGREDIENTS:                                      %WT.

Phase A

Koboguard 5400 IDD (Kobe Products)               14.29
  (Hydrogenated polycyclopentadiene
  [and] ilsododecane)
Permethyl 99A (Presperse)                         0.35
  (Isodocane)

Phase B
Lucentite SAN (Kobo Products)                     2.00
  (Lithium magnesium silicate)
Phenoxyethanol (NIPA Labs)                        0.66

Phase C

PM9P50M170 (Kobo Products)                       30.00
  (Titanium dioxide [and] Isododecane
  [and] alumina [and] dimethicone
  [and] polyhydroxystearic acid)
Tospearl 20000B (GE/Kobo Products)                3.38
  (Polymethylsilsesquioxane)
SF1540 (GE/Kobo Products)                         6.80
  (Cyclomethicone [and]
  PEG/PPG-20/15 dimethicone)
Covi-Ox T70 (Cognis)                              0.25
  (Tocopherol)

Phase D

Arlacel 80 (Uniqema)                              0.75
  (Sorbitan oleate)
Crill 6 (Croda)                                   0.75
  (Sorbitan isostearate)
Propylparaben (iSP Sutton)                        0.10

Phase E

Sodium chloride (Morton Salt)                     1.00
Deionized water                                  17.70
Methylparaben (Protameen)                         0.10

Phase F
Syncrowax HGL-C (Croda)                           1.65
  (C18-36 triglycerides)
Syncrowax BB-4 (Croda)                            1.10
  (Synthetic beeswax)
Vitamin E acetate (Roche)                         0.10
  (dl-alpha tocopherol)

Phase G

Velvesil 125 (GE/Kobo Products)                  17.70
  (Cyclopentasiloxane [and] C30-45
  alkyl cetearyl dimethicone crosspolymer)

Phase H

Vanillin (Citrus & Allied Essence)                0.02

Phase I

Deionized water                                   1.00
dl-Panthenol (Roche)                              0.30

PROCEDURE:

Combine phase A materials. Add the Lucnetite
SAN slowly to phase A. Stir at high speed for 20
min. Add Phenoxyethanol and stir an additional
20 minutes. Combine all the ingredients in
phase C to a stainless steel beaker and stir at
high speed with a Cowles dissolver for 30 minutes.
Add gel phases A-B to phase C to form the
base. Add phase D to the base and homogenize
for 15 minutes, Combine aqueous phase E and
stir until clear. Add phase E slowly to the base
and continue homogenizing while heating to
75[degrees]C. Add the waxes (phase F) to the base and
continue to homogenize. Begin air cooling. At
70[degrees]C, add the Velvesil and QS solvent loss. Add
phase H to the main batch at 55[degrees]C. At 42[degrees]C,
add the panthenol solution. Continue homogenizing
and cool till 25[degrees]C. Fill into appropriate
containers.