BASF creates new sunscreen formula. (Formulary).

Here are product formulas supplied by producers of raw materials.

* Included in some instances are sources of supply for the raw materials and instructions for preparation and use of the finished product.

No guarantee of performance or safety is implied by Happi.

* For more complete details readers should contact the suppliers directly using the telephone number or website provided with each formula.

If your company has a formula that you think would be of interest to readers of Happi: marketers of soaps & detergents; cosmetics & toiletries; waxes & polishes; disinfectants & sanitizers and other chemical specialties, we will be pleased to consider it for publication. Address all material to:

Double Defense Sunscreen Lotion

INGREDIENTS:                       % WT.

Phase A
Glycerin                             3.0
Xanthan gum                          0.3
Magnesium aluminum silicate          0.5

Phase B
Deionized water                     q.s.
Potassium cetyl phosphate            0.5
Dimethicone copolyol                 0.1
EDTA BD (BASF)                       0.2
  (disodium EDTA)

Phase C
Sucrose ester                        3.0

Phase D
Isohexadecane                        1.0
Octyldodecyl neopentanoate           1.0
Stearyl alcohol                      0.5
Behenyl alcohol                      0.5
Cetyl alcohol                        0.5
Bisabolol, racemic (BASF)            1.0
  (bisabolol)
Vitamin E Acetate (BASF)             1.0
  (tocopheryl acetate)
Phytantriol (BASF)                   0.3
Cremophor GS 32 (BASF)               2.0
  (polyglyceryl-3 distearate)
Steareth 21                          2.0
Uvinul M 40 USP (BASF)               2.0
  (benzophenone-3)
Uvinul N 539 (BASF)                  3.0
  (octocrylene)

Phase E
Isohexadecane                        3.0
Uvinul MC 80 (BASF)                  6.0
  (octyl methoxycinnamate)
Isononyl isononanoate                3.0
Z-Cote HP-1 (BASF)                   6.0
  (zinc oxide (and) dimethicone)

Phase F
D-Panthenol 75W (BASF)               1.0
  (panthenol)
Preservative                         0.3
Fragrance                            0.1

PROCEDURE:

And ingredients in phase B in primary kettle
and mix with slow agitation. Begin to heat
batch to temperatures between 75-80[degrees]C. Add
pre-wetted gums in phase A under slow propeller
mixing and continue to maintain temperature.
Add phase C to phase A/B and mix well.
In a separate kettle with a homomixer, begin to
disperse phase E. Homomix until particulate is
dispersed. Check dispersion with hegman. In a
separate kettle, add phase D and begin to heat
to temperatures between 75-80[degrees]C. Add phase E
to phase D. Maintain temperatures between
75-80[degrees]C. Homomix for 1-2 minutes. Once
phase A/B/C and phase D/E are at 80[degrees]C, add
phase D/E to phase A/B/C under homogenization.
Continue homogenizing until batch is uniform.
Transfer to sweep mixing and begin to
cool to 40[degrees]C. Add phase F one ingredient at a
time. Mix well.

MORE INFO:

BASF Corp., 3000 Continental Drive North, Mt. Olive, NJ 07828
Tel: [phone]; Fax: [phone]; E-mail: [e-mail];
Website: www.cosmetic-basf.com

Damaged Hair Shampoo for Men

INGREDIENTS:                                         %  WT.

Deionized water                                        q.s.
Tego Betaine L-7 (Goldschmidt)                         7.45
  (cocamidopropyl betaine)
Standapol ES-2 (Cognis)                                18.9
  (sodium lauryl ether sulfate)
Standapol WAQ-LC (Cognis)                              12.8
  (sodium lauryl sulfate)
Merquate 2001 (Ondeo Nalco)                             1.5
  (polyquaternium-47)
Sodium chloride                                         2.5
Hamposyl L-30 Type 719 (Hampshire)                      4.5
  (sodium lauroyl sarcosinate)
Versene 100, NA2 (Dow)                                 .075
  (disodium EDTA)
Sodium hydroxide                     q.s. to pH 6.0 +/- .02
Citric acid                          q.s. to pH 6.4 +/- .02
Fragrance                                              q.s.
Preservative                                           q.s.

PROCEDURE:

Dilute Merquat 2001 in water. Adjust pH with
NaOH to 6.0 +/- .02. Add remaining ingredients,
beginning with Tego Betaine L-7. Mix well
after each addition. Adjust pH with citric acid to
6.4. Add fragrance and preservative.

MORE INFO:

More info: Ondeo Nalco, Ondeo Nalco Center, Naperville, IL 60563
Tel: [phone]; Fax: [phone]; Website:
www.ondeo-nalco.com/cosmetics

Cream-to-Powder Eye Shadow

INGREDIENTS:                               % WT.

Phase A
Eutanol G (Cognis)                         13.0
  (octyl dodecanol)
Dermacryl LT (National Starch)              1.0
  (acrylates/octylacrylamide copolymer)

Phase B
Multiwax W-835 (Witco)                     0.30
  (microcrystalline wax)
Bentone Gel VS-5 PC (Rheox)                30.0
  (cyclomethicone (and) quaternium-18
  hectorite (and) propylene carbonate)

Phase C
Myrito1 318 (Cognis)                        3.0
  (caprylic/capric triglycerides)
Trivent SS-20 (Trivent)                     0.5
  (octyl dodecyl stearate)
Emerest 2452 (Cognis)                       4.0
  (triglycerol diisostearate)
Vitamine E Acetate-C (BASF)                 0.1
  (tocopheryl acetate)
Isopar H (Exxon)                            7.4
  (C11-12 isoparaffin)
Cab-O-Sil TS-530 (Cabot)                    0.5
  (silica silylate)
Spectrapearl BLG (Van Dyk)                 10.0
  (mica (and) iron oxide (and) titanium
 dioxide)
Vitamine E Acetate-C (BASF)                 0.1
Dry-Flo Elite BN (National Starch)         30.0
  (aluminum starch octenylsuccinate
  (and) baron nitride)
Phenoxyethanol (Haarmann & Reimer)          0.2
  (phenoxyethanol)

PROCEDURE:

Phase A: Slowly sift Dermacryl LT into
Eutanol G; heat to 80[degrees]C and mix until complete.
Add phase B; mix thoroughly. Combine
phase C. Add phase C to phase A and phase
B; mix thoroughly. Cool to room temperature.

MOTE INFO:

National Starch & Chemical, 10 Finderne Avenue, Bridgewater, NJ 08807
Tel: [phone]; Fax: [phone]; E-mail:
[e-mail]

Aloe Vera and Protein  Shampoo

INGREDIENTS:                              % WT.

CoVera                                     31.4
  (aloe barbadensis leaf juice)
Tetrasodium EDTA                            0.3
Esi-Cryl 11                                 1.0
  (styrene acrylates copolymer)
Rhodapon LT-6/F                            56.0
  (TEA-lauryl sulfate)
Colorant                                   q.s.
  (certified-LCW/Warner Jenkinson water
  solubles)
Mirataine BET C-30                          5.0
  (cocamidopropyl betaine)
Wheat-Tein NL                               0.4
  (hydrolyzed wheat protein)
Alkamide DC-212/S                           4.0
  (cocamide DEA)
Mirasil DME-30                              1.6
  (dimethicone (and) laureth-8 (and)
  succinoglycan)
CoSept 200                                  0.3
  (quaternium-15)
Fragrance                                  q.s.
Citric acid                                q.s.
Sodium chloride                            q.s.

PROCEDURE:

Heat CoVera to 40[degrees]C and add tetrasodium
EDTA. When uniform, slowly add Esi-Cryl 11
with strong, smooth mixing. When uniformly
dispersed, add the remaining ingredients in
the order listed. Adjust to pH5 with citric acid
and adjust viscosity with sodium chloride as
desired.

MORE INFO:

RTD HallStar INc., 1500 Route 517, Ste. 305, Hackettstown,
NJ 07840-2709
Tel: [phone]; Fax: [phone]; E-mail:
[e-mail]

Gel Sanitizing Vertical Surface Cleaner

INGREDIENTS:                              % WT.

Deionized water                            40.0
50% NaOH                                    5.0
DeMox CSG-30 (DeForest)                    15.0
Sodium hypochlorite 10%                    40.0

PROCEDURE:

Add first three ingredients and mix well until
thick and fully dissolved. Add the chlorine
bleach last, mixing well as it is added. A viscoelastic
gel is formed.

COMMENTS:

Use "as is" on vertical surfaces or those surfaces
that require clinging action.

MORE INFO:

DeForest Enterprises Inc., Amtec Center, 6421 Congress Ave., Boca
Raton, FL 33487
Tel: [phone]; Fax [phone]

Formulary Editor

Happi
70 Hilltop Rd.
Ramsey, NJ 07446 USA